incogneato
- 7,177
- 313
I prefer to just put some canna coconut oil in my coffee if that's what I'm doing. Did it yesterday and had a good day
- Status
jipp
- 9,640
- 313
heh just the thought of canna butter makes my gut toss. heh.
chris.
chris.
LocalGrowGuy
- 2,497
- 263
Teal Deer: You will be happy with the terp profile that comes through and would be a good fit for your concentrates, or at least the stuff I've seen you post about enjoying (CRX etc).
I really, really like the Innovape dual quartz coils, and I use it with an eleaf battery. They are hit and miss with inventory, and you have to ask for dual quartz coils, they have singles and will want to move their cotton wicked coils. The one you are looking for is a dark gunmetal color, with a purple logo. The coil and mouthpiece run about $25 and replacement coils are $5-$10 I think. They are 5/10 threaded but you'll need the adapter since the threads are shrouded, if that makes sense. My biggest issue is trying to put a sessions' worth of material into the coil. I don't like to reload when the coil is warm or hot, and if I don't smoke what's in there it will leak through the bottom. Always remove the coil from the battery and it's easy to clean with a needle to clear the draw hole and a qtip cut in half to clean up the threads at the battery connection.
The dual quartz coil heats up almost instantly, much quicker than cotton or ceramic coils, where other units take a while to heat the resin to combustion. You'll burn a coil starting out, that's why I buy three or four at a time. You also want to watch the wattage, since the coil heats so quickly. It won't burn, it will just be a giant hit of forehead sweat inducing goodness.
I've pretty much given up on finding a unit that I can load a decent amount of resin or wax or raw distillate into a tank, since most of those are specifically made for ejuice that is watery, not thick like oil or other concentrates.
This is not the brand but it's the same, found via quick google search. The intake hole is on the bottom, below the dual coils, they are close enough to the bottom that they don't leave anything left over, and the quartz gets red hot, which I think heats up the concentrate, melting it, pulling it down to the coil. I've never had to clean out a coil, just unclog it. I've also never, ever had a burned taste like I have had with other similar products. The hole sits in the middle but you can stick a needle clean through the bottom to clear it, something that isn't an option with other cartridges or coils or skillets that I have seen. Get the needle red hot, poke, blow, reload. Or, use a dab/honey straw to clear the unburned stuff at the bottom.
They have a store near park meadows and another one on broadway and hampden south of ACA. The location I went to a month ago had a few left and I bought them out, but they said they're popular. I can send one if they are out or if you aren't going to be up this way. Shoot me a pm if you want or I'll keep a blue and a pink one for you in place of a cigar.
edit- you want to ask for a 'dual coil skillet'
rmoltis
The Beast Slayer
Supporter
- 3,912
- 263
Have you investigated the puffco+
?
I can load about .08-.10g of pure concentrates before it approaches the upper air intake holes. It has not clogged on me yet.
It uses no metals, coils, fibers, glue etc in the convection chamber.
It's all ceramic.
https://www.puffco.com/products/puffco-plus
Wildill
- 445
- 93
Grape frost got some color to come out this run.
jipp
- 9,640
- 313
THELORAX802
- 880
- 243
Idk what lineage it is. Freestuff doh!!!
DAT
- 1,022
- 263
It is the same tie die colors as the first skateboard I had . I got a huge discount because the original glass bowl was broken in it and I cut myself when looking at it. So I got to replace it with that super pretty purple bowl and longer better stem! He also threw in a delicious dark Chocolate Groin medible for free.!!
MIMedGrower
- 17,190
- 438
If I want to get baked or have severe pain I just eat our coconut oil. This is for a nice uplifting morning buzz.
The oil is nice and full strength.:-)
LocalGrowGuy
- 2,497
- 263
I tried the Atmos kiln and was not impressed at all. The intake was too small for a decent draw, which only made hot oil spatter across the mouthpiece and the back of my throat. It might have been a defective heating element but it took almost the full draw time to get the ceramic disc/coil to even get hot enough to melt wax.
rmoltis, I'll take a look at the puffco. I see cannabist didn't shit all over it which is nice. How the fudge does that white dart work?
http://www.thecannabist.co/2016/06/06/puffco-plus-building-better-vape-pen-review/55069/
pm me your address.
edit- I meant to add that I've been wanting to get an electric nail or even a titanium one, but I don't like cords or burning down the joint. I tried and have been wonderfully happy with the Yocan Torch E-Nail Domeless Rig, it's dual coil (i think) and it allows for a much bigger load.
Last edited:
DAT
- 1,022
- 263
that looks really great. Nice work!
thanks chris. .. Have not gotten high in a week so i could lower my tolerance .
LocalGrowGuy
- 2,497
- 263
Is it available locally?
rmoltis
The Beast Slayer
Supporter
- 3,912
- 263
That little dart is built to reside in the upper mouthpiece.
It is removable for cleaning but is used in place in the mouthpiece.
It is made of ceramic and is your "dab" tool. You remove your nugget of wax with it balled up on the end.
Then as you screw the mouthpiece on. It places the dab on the convection surface.
It is amazing how convenient this function is. The dart also has a splash guard to prevent splatter. Works very well.
Cleaning is also a breeze.
I personally clean after 1 completely filled oil session. My rso has plant matter that leaves residual.
I take q-tips dipped in acetone or isopropyl to clean the chamber.
About 3 q-tips and it's cleaned out thoroughly.
This may not be a modifiable pen. But is sure is great for the specific thing it was engineered for Which is oil.
I bought it on a holiday promo after it was released for $70. it's starting price was $99 .Now it seems its $119 on the website. Supply and demand I guess.
rmoltis
The Beast Slayer
Supporter
- 3,912
- 263
I purchased it online so I'm not sure.
LocalGrowGuy
- 2,497
- 263
Thank you kindly. It's on my list.
edit- @rmoltis, I'm not high right now and that's probably the problem, but buying each item individually, at the bottom of the page you linked, would be less than $90, so we get a reverse kit discount buying it as a package?
Last edited:
rmoltis
The Beast Slayer
Supporter
- 3,912
- 263
rmoltis
The Beast Slayer
Supporter
- 3,912
- 263
That silicone bong is tight!
- Status
Latest posts
-
TBrowning Leaves Week 6 Flowering Help!!
- TheCojn55 posted
-
Why do growers buy Mars Hydro?- Mikedin posted
-
Yellowing leaves and brown spots- Stokes posted
