4x8 plywood tables
3 sheets framed together so 24' each section
4 sections total
Slopping @ 12" off floor to 4" for water drainage to a 12x12x48 reservoir with sump pump fed with 3/8 polyeurothane tubing inserted into 2" pvc auto water
Expensive set up but waters 156 warrior pots 5 gallon in...
I have 20 gravitas in a warehouse
10 tons of air
On my 2nd run
Spacing is 5' on center
Built my own tables with plywood and corrugated sheeting
I'm an electrical contractor and have built many rooms
See me in grow room electrical if u need some answers
Hiboy
Bobby MY BOY BOBBY
dont be a hater
i gave you sound advice
your obviously not who you pretend to be
DONT YOU HAVE ANY QUESTIONS ABOUT MY ANSWERS TO YOUR QUESTIONS ?????????????????????
:sick0004:
tRICHROME... explain this. went to pool pump reads 208 volt using 9.6 amps... THEN 230v uses 8.8 amps.
UR SO UNEDUCATED
GUESS WHAT... HIGHER VOLTAGE REQUIRES LESS AMPS. WHICH IS $
MAYBE YOU SHOULD REREAD WE ARE TALKING PUMPSSSSS. AND A,C
AMPS ARE NOT YOUR FRIENDS
AMPS ARE NOT YOUR...
THIRD
take a load meter and put in on the white or black you instructed...
where at the panel
well.....
you wont get a reading testing the white wire... unhook it at the panel and
you'll fry everything..why dont you try that and prove me wrong..
and if you test your neutral at the...
Lets end this quick and i'll put it in big words
FIRST.. YES WE'RE BILLED BY KILO WATT HR.. IN THE U.S.A,
BUTTTTTTTTTT
240V RUNS AT A LESSER AMP WHICH MEANS IT PRODUCES LESS KILO WATTS!!!!!! HERE LOOK AT THISSS ....... KW IS $$$$ KW IS $$$$
240V MORE.. 120V LESS..
Holy krap ok here we go.
FOR THE ELECTRICAL UNSKILLED.
THE HIGHER THE VOLTAGE THE LESS AMPS EQUALS $$$$$$$
THAT ENDS THAT
2ND.
I SAID ITS POSSIBLE TO SQUEEZE TWO 1000 WATT LAMPS ON A 20 AMP
120V CIRCUIT.
SURE ITS OVER THE RECOMMENDED 80%... YOUR ALSO "ASSUMING" ALL BALLASTS TAKE 1100...
Do it.. haha just kidding.. wanted to raise a few eyebrows but my 3 cents is if there is a dimmable ballast available and thats what its stated to do.. then im sure the company who makes it could tell you the right dimmer to use... rated at a thousand or more watts.. wouldnt try dimming an...
I thought that gnats lay eggs in your medium and will hurt your roots. Any one know about this... I also bought the sticky paper from h. depot and it folds to an open triangle around the stem. In a week they were filled with all the flying suckers..
Ok Bobby now that the pressures on... haha.. i'm doing this from memory of reading your quote.... I'ld first put the a/c with the dehumid/humidifier on the 15 amper... just AROUND 1500 watts which is your safe point on it. Then if your dedicated two 20 amp circuits are not sharing the neutral...
I agree papa but that's why we try to follow the 80% guidline. To leave a little room for surges and the variation of actual draw from equipment . .sorry bobby
Bobby...what do you want to plug in to your cord? From the link to h depot Imo they would rate it continuous .... a breaker is recommended to be at 80%. Your wire ain't gona burn..your breaker will trip first if operating correctly. Put a 20 amp gfi for ur plug. You'll be golden. Volt drop...
Ok let me clarify something.... running 240v with a/c, h.d. pumps will save you money vs 120v. I am checking on the ballast comsuption of power to see if it matters. peace
Osk... you pulled your old breaker out and replaced it with the same but no power. Then put the old one back in and it worked but hasnt tripped since your now using it for something else... sounds like your load was heating up enough to trip that breaker.. they are made to do that on an...