Choppr
- 506
- 143
looks like a good price for everything you get, that "barn style" tent would be a hard pass for me, it looks like its only "4 ft tall" in the "square part" of the tent, and 2 feet of angled roof.....can the lights raise up into that angled part of the tent? looks like lights are 28" x 27" so maybe you could get them up higher into the roof area, how high? something to consider...lights look pretty good with 301H's - my tents are 80" and I still can have height issues w/ Sati'sHey guys, my state just made it legal for me to grow and was looking for some advice. Primarily looking at this kit to start and plan on getting it this coming Friday https://myhigrow.com/product/myhigrow-4x8-grow-tent-complete-kit-with-roof-grow-tent-4x8-960-watt/
Is this adequate for 12 plants?
Plan on going with autos and have made good use of royal queen seeds holiday sale and have a good mixture of Northern lights, North thunderfuck, blue cheese, fat banana, white widow, watermelon, and triple g on the way.
Lastly has anyone used Coast of Maine soil? Looks like a pretty solid set up and should only need nutrients during the flowering process? Thanks in advance
So it looks like it will go just as high as the standard tent since the ventilation system takes up the same amount of space at the top and the lights are wired to the very top of the tent like normal. Due to the steep angles this was the only way to get a 4x8 and still have room to work other wise it would have taken all the middle spacelooks like a good price for everything you get, that "barn style" tent would be a hard pass for me, it looks like its only "4 ft tall" in the "square part" of the tent, and 2 feet of angled roof.....can the lights raise up into that angled part of the tent? something to consider...
Can you put your ventilation system outside the tent to make more room for the lights?So it looks like it will go just as high as the standard tent since the ventilation system takes up the same amount of space at the top and the lights are wired to the very top of the tent like normal. Due to the steep angles this was the only way to get a 4x8 and still have room to work other wise it would have taken all the middle space
my exhausts are roof top mounted - for more headroom. Its really all on how well you train, multi-topped bushes will stay short, but then they get wide - looks like a good start up my'dude - post more pics after your set-up - cant wait to see it in action - Right OnSo it looks like it will go just as high as the standard tent since the ventilation system takes up the same amount of space at the top and the lights are wired to the very top of the tent like normal. Due to the steep angles this was the only way to get a 4x8 and still have room to work other wise it would have taken all the middle space
Haven't considered that route but it looks like I have room?Can you put your ventilation system outside the tent to make more room for the lights?
Correct they ran out so they upgraded me to 5 of the 200w lightsdifferent lights than the ones in the Advertisement...you should be able to configure better with those...
Yeah they say it helps spread it out and avoid to much at the center. We shall see. I've only seen 2 independent videos and both seem very promising.Very Strange Diode Array on that R Series....?
I haven't seen an LED array like that before. Most lights do tend to project more power directly under the light. That's okay when there's a plant directly under the light. That's how I grow—with one light per plant. I just installed an AC Infinity light that's square with a hole in the middle in my 2x2 tent. I'm thinking that should disperse the light better. We'll see... I just started a seedling for it.Yeah they say it helps spread it out and avoid to much at the center. We shall see. I've only seen 2 independent videos and both seem very promising.
If it’s a week out I’d pop em. My seedlings are almost never in a tent, just on a shelf with a veg light over them, keep the tops of the doors on the tent open, turn off all lights except one and use it once a few seeds break soil, keep it about 30” above the seedlings, a lot of people worry about VPD etc et, at this point I don’t if they die now they weren’t ment to be, but with the doors open a bit the RH will stay high enough and the tent will stay warm enough, you won’t need lights on them at all for at least 3-4 days anyways since you still have to germinate and sow themHopefully the growers kit/ventilation comes in this week, would really like to start sprouting seeds this coming weekend.
Plenty of room, keep the filter and exhaust outside just tie the inlet piping for the fan into one of the top ports on the tentHaven't considered that route but it looks like I have room?
I buy packs of these every time I get a light, defenitly ditch the metal crimped hangers I’ve seen 3 of them break the crimps under very light loads hookdifferent lights than the ones in the Advertisement...you should be able to configure better with those...
the long cable wires can be ditched too, to get you up higher if needed...I make my own cables (much shorter)
My only concern is that having 5 lights that would mean every time I need to adjust it would be 20 adjustment points. Thinking that if I tie a wire from the 2 connection points at either end and connecting the pulleys to that so I only have 2 adjustment points per light. Looks like I can get them pretty close, if not to the topI buy packs of these every time I get a light, defenitly ditch the metal crimped hangers I’ve seen 3 of them break the crimps under very light loads hook
Use 4 for each light if you have 4 mounting points, to acheive the max height possible
I normally only end up moving my lights twice a grow once mid veg then once around week week 2 of flower, I get the pain though lol, or do like I do and keep them high and bring the plants up to them and slowly lower, as they stretch, (also less of a back strain to you as well lol)My only concern is that having 5 lights that would mean every time I need to adjust it would be 20 adjustment points. Thinking that if I tie a wire from the 2 connection points at either end and connecting the pulleys to that so I only have 2 adjustment points per light. Looks like I can get them pretty close, if not to the top
Just got these in. Looks like I can get about 5'4" or about 163 cm from floor to lights.I buy packs of these every time I get a light, defenitly ditch the metal crimped hangers I’ve seen 3 of them break the crimps under very light loads hook
Use 4 for each light if you have 4 mounting points, to acheive the max height possible
Damn that looks clean fam!Just got these in. Looks like I can get about 5'4" or about 163 cm from floor to lights.View attachment 2096586
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?