Aeroponic cloner. What is inside?

[E9noxis]

Show your plants

Water temp

Smallest humidifier ever

I spray them with water 3 times a day

 

[E9noxis]

Give it to me straight doc. Wtf is this chick's problem?

There was absolutely nothing different done between them all. But this one is playing chameleon

 

[SweetLeafGrow]

Check inside and make sure that corner is getting good spray maybe??? I had one that was showing signs of something awry and checked and I had a clogged sprayer. Took it out and cleaned it up and everything cleared up.

 

[steamroller]

It [ the clone in question] also has the least amount of fans to feed off of .
So it would seem natural for the 1 fan to look worse then clones with 2,3 or even more.
I have only officially cloned once with my aeroponic cloner [ homemade], but when I did I added rootone to the water.
It was a slow and painful process, but all clones lived .
I never sprayed or domed the clones as that seems the preferred method for aeroponic cloning to not.

 

[Lpena93]

Light source?

You can use low power light for clones. Nothing bright, just low powered fluorescent light or cheap “grow lights” that won’t kill clones because too much light. Bout 2000-5000 Lux . No more than 7k lux

 

[Lpena93]

I will in like 2 hours when I get back.

24 hours of cloner? Or light? Or both?

You can do 24hrs or 18/6

 

[Lpena93]

Also. I'm doing 24 hrs of light. View attachment 1246746
2 of these about 10 to 14 inches above

One of these is perfect for cloning

 

[Lpena93]

Give it to me straight doc. Wtf is this chick's problem?

View attachment 1247044View attachment 1247045

There was absolutely nothing different done between them all. But this one is playing chameleon

Dude you have one of the best cloner machines. Just use tap water 1/2 gal
Take about 8 drops of clonex solution and let it sit for 4-5 days. Make sure that lights inside the tent isn’t over 8k Lux

 

[Lpena93]

Simple, don’t overthink

 

[Lpena93]

Give it to me straight doc. Wtf is this chick's problem?

View attachment 1247044View attachment 1247045

There was absolutely nothing different done between them all. But this one is playing chameleon

Dude dm me and maybe we can get on the phone. Way too much typing

 

[E9noxis]

Check inside and make sure that corner is getting good spray maybe??? I had one that was showing signs of something awry and checked and I had a clogged sprayer. Took it out and cleaned it up and everything cleared up.

I lifted it out while it was spraying. It's getting that corner fine.

It [ the clone in question] also has the least amount of fans to feed off of .
So it would seem natural for the 1 fan to look worse then clones with 2,3 or even more.
I have only officially cloned once with my aeroponic cloner [ homemade], but when I did I added rootone to the water.
It was a slow and painful process, but all clones lived .
I never sprayed or domed the clones as that seems the preferred method for aeroponic cloning to not.

I dont dome them but I spray them. Should I stop? I figured they have no roots so leaves are their only drinking ability.

 

[E9noxis]

Dude you have one of the best cloner machines. Just use tap water 1/2 gal
Take about 8 drops of clonex solution and let it sit for 4-5 days. Make sure that lights inside the tent isn’t over 8k Lux

It takes 1.5 gallons to get above the pump. Half gallon won't cut it.

Let it sit for days without spraying? That seems detrimental to the whole process. I clonexed them before they went in but again, the sprayer just washes it off so I don't even know why I did it.

I'll check the lux when I get home again.

 

[E9noxis]

Dude dm me and maybe we can get on the phone. Way too much typing

No thanks.

 

[Lpena93]

No thanks.

My bad I was high af, yeah you’ll learn as you go.

Just make sure the Lux is right. Yo can use tap water to clone. Don’t really need nutes until the roots come out. It’s really simple bro

 

[E9noxis]

Yeah. I used tap water. Phd it to 6.3
It's just that one leaf that's in question.

 

[Lpena93]

Yeah. I used tap water. Phd it to 6.3
It's just that one leaf that's in question.

You have to ph it to 5.5 for cloning

 

[E9noxis]

Thank you. I will adjust it immediately upon my return.

 

[E9noxis]

I just re clonexed everyone. Found some roots.

I'm blaming the yellowing leaf on it being the only leaf on the stalk.

 

[Lpena93]

It takes 1.5 gallons to get above the pump. Half gallon won't cut it.

Let it sit for days without spraying? That seems detrimental to the whole process. I clonexed them before they went in but again, the sprayer just washes it off so I don't even know why I did it.

I'll check the lux when I get home again.

It washes off but the hormone touched the stem, also, it mixes with water so keep doing it.

 

[mrthoopai1]

make sure your cloner is clean i spray with the stuff alcohol and wash good.I use tap water no ph in 16 site cloner i use 15-30ml pg (the stuff homemade clear rez pool shock(calcium hypochlorite) with water mix 1 gram per gallon of water). use that mixture 15-30ml pg.I put 1-3 cuts per puck i use KLN 1ml in 2g cloner. cycle timer 15on 15 off. Always root in 7-9 days. if the water look funny or smell stink change the water and throw some stuff inside.