E9noxis
- 1,221
- 263
Show your plants
Water temp
Smallest humidifier ever
I spray them with water 3 times a day
Show your plants
You can use low power light for clones. Nothing bright, just low powered fluorescent light or cheap “grow lights” that won’t kill clones because too much light. Bout 2000-5000 Lux . No more than 7k luxLight source?
You can do 24hrs or 18/6I will in like 2 hours when I get back.
24 hours of cloner? Or light? Or both?
Also. I'm doing 24 hrs of light. View attachment 1246746
2 of these about 10 to 14 inches above
One of these is perfect for cloning
Dude you have one of the best cloner machines. Just use tap water 1/2 galGive it to me straight doc. Wtf is this chick's problem?
View attachment 1247044View attachment 1247045
There was absolutely nothing different done between them all. But this one is playing chameleon
Dude dm me and maybe we can get on the phone. Way too much typingGive it to me straight doc. Wtf is this chick's problem?
View attachment 1247044View attachment 1247045
There was absolutely nothing different done between them all. But this one is playing chameleon
I lifted it out while it was spraying. It's getting that corner fine.Check inside and make sure that corner is getting good spray maybe??? I had one that was showing signs of something awry and checked and I had a clogged sprayer. Took it out and cleaned it up and everything cleared up.
I dont dome them but I spray them. Should I stop? I figured they have no roots so leaves are their only drinking ability.It [ the clone in question] also has the least amount of fans to feed off of .
So it would seem natural for the 1 fan to look worse then clones with 2,3 or even more.
I have only officially cloned once with my aeroponic cloner [ homemade], but when I did I added rootone to the water.
It was a slow and painful process, but all clones lived .
I never sprayed or domed the clones as that seems the preferred method for aeroponic cloning to not.
It takes 1.5 gallons to get above the pump. Half gallon won't cut it.Dude you have one of the best cloner machines. Just use tap water 1/2 gal
Take about 8 drops of clonex solution and let it sit for 4-5 days. Make sure that lights inside the tent isn’t over 8k Lux
No thanks.Dude dm me and maybe we can get on the phone. Way too much typing
My bad I was high af, yeah you’ll learn as you go.No thanks.
You have to ph it to 5.5 for cloningYeah. I used tap water. Phd it to 6.3
It's just that one leaf that's in question.
It washes off but the hormone touched the stem, also, it mixes with water so keep doing it.It takes 1.5 gallons to get above the pump. Half gallon won't cut it.
Let it sit for days without spraying? That seems detrimental to the whole process. I clonexed them before they went in but again, the sprayer just washes it off so I don't even know why I did it.
I'll check the lux when I get home again.