Ph 007
- 988
- 93
How is your pH staying with bubbling the reservoir like that?Taken today jun 22.
5 days into flower now.
I split the stalk on one last night on the Y trying to LSD one of them last night gutted. But I tied it back together to close the split, it was a good half inch to a inch max.
Look today and you would never tell anything happen the plant looks completely fine fair play :)
Plants have have had 1.2 ec for 2-3 days
And today bumped it up to 1.4 ec all feedings with 0.5ml a litre of of cal mag
Just like a few of your said..
I set up auto pot automatica feed yesterday and the plants are looking good , the top if the coco is damp but not as wet as it was when I was having problems, looks like bottom feeding has given the top of the coco time to dry a bit was way to wet..
I think i finally have masters coco :)
Was a bitch two begin with.
And for the record if anyone cares lol
Iv been meaning to sign up to a forum like this for a good 7 years glad I finally did, you guys saved me a lots of time that I would of wasted flushing low feeds and all sorts of stuff,
woop woop chicken soup
Some pics below
Ready today
View attachment 876933View attachment 876934View attachment 876935View attachment 876936View attachment 876937View attachment 876938
And no I have ready and though about rinsing the coco and maybe with calmag a day before potting but I use coco in bag from grow shop I though its didn't need rinseing was already treated.
When I purchased coco it was in a brick and I had to rinse that stuff in fabric pots for a long time watching the silt come out until it was running clear then I hit it again with water, even hot water from the filtered shower wand but yours may be different.
Every plant that I have tried to start from seed or clone in coco, I have eventually had to remove because of too much water retention in cup.
I like it and mixed mine with a combo of pro-mix and worm castings.
Different strokes!
Good luck!
Keep an eye on those autopot lines and floats. I would seriously recommend taking them apart and cleaning them every week.Bloodshot I set pH in the ewtwr butt at / reservoir at 5.7 because I knee it would rise, the the nest day it went to 5.8 and I reset to 5.7/ same again next day, the e.c disbty go upp yet with the pH down I had to add on both occasions..
I was hoping pH will stay at 5.8-5-9 now its jee adjusted twice see now init..
I do know when my e.c is a little higher with my flowering boosts my pH sits at 6 itself and small adjuat won't should stay at 5.8 I'm hoping. Tine will tell lol
This is my 4 grow with coco and 1st time with auto pots with cocoa in them.
The problem I'm having abivey with ttansplaby ate being hand waterd their now in them pics. In get same problems every time in transplant from clone machine into coco
The waiting game, you'll get it nailed down eventually, at least we have more than the odd issue of high times and word of mouth these days!In started one seed in coco and that was a mission to get it healthy won in the end tho, it was slow growth for a while..
And ilo have to google with a combo of pro-mix and worm castings.
I know a little about worm castings, hagw to read about them both later,
I though worsm castings where just organic feed.
I'm sure its buffed coco don't need cal mag and I'm over feeding cal / mag and what ever else is in their or might be even over watering was my problems before i water less now and ones in auto pulled through nice to go onto auto pot
The slow growth inhet every trans plant I seem to win the battle in tge and but god i east time a good extrav1-2 weeks longer veg , even 3 be better :(
Keep an eye on those autopot lines and floats. I would seriously recommend taking them apart and cleaning them every week.
I too have just made the switch to autopots and this is my first run with them and my first time with coco, pro-mix and worm castings.
I had a slime develop and clog the lines and it started in the rez. some pots were empty and some almost over night. I noticed the level in the pot you last showed was looking kinda' low, but that just may be the way yours run or the pic.
Good luck!
Yes, I found that hooking an air pump to the line and blowing them out seems to work well also. I'm topping mine to about 5 gallons now while I see how things go. I am pretty sure it was one of the additives I was using in the nutrient kit that was causing the slime to develop. and clog things.I just edited my last reply as sisbt make alotnod sends better now lol..
Good eye fair play tonapot it was low in that pic lol. It was low I just pulled flot up off the pot and shook the main line about banging it.on the floor that usually works..
Iv use auto pots good 7-8 years they easy very easy love them but was with soil..
I very very rarely get clogged lines well the last few years anyway.
What I learnd ice the years wit then is never let the line dry out bassicly always make sure their is water in the resivour did i spell that right lol..
And 3-4 litres ain't good enough, 5 lirewa agould be min, so when their is 5 litres in in their it's time to top up and put 10 litres in or more if you want,,
I find the more water the leaa chance of clogging it's because the weight all that water makes it harder for any clogs to appear ass tgw pressure pushes the water through the pipes , leas water don't have the pressure if u get me.
But
When If I add root stimulant or root feed this seems to gpog the lines brown grap builds up in the lines,, I stopped using root feed/stimulant last 6 years and no difference in yield, but I did stat using it again last year just before i went into coco, I use it as i was trying to get everything perfect pH feeds temps hoping for more tiele and didn't anymore yield,, but I found used using the root feed again in every feed my line where blocking, so I would use it then whwh but was low is put 10 litres of water in but bit root feed, then whwh it drunk that it put another 10 litres in but with root fees , just basicly didn't use it constantly.
Look like the root feed was feeding the baterior in the lines that grew and causes block..
Tip to unblock keep the ress water high like in said, and ifnget a blockage pill float out and open bottom valve and bang the pipes on the floor till see water flowing out,,.
Another tip is pull float off the end of the line and use a seringe to pull the block out..
And shops say change the line regular iv had same lines for 6 years lol,, when grow finished I'll take all thenlines all still together on and floats and one side of the line I'll put bleach in and takenshower head off shower and rub water rethought the lines,, or if really last just drip lines with floats in in batg connect thereafter butt up and full it with blech and water leave run for hour :) then rub just water through
I shall be trying block coco next as well as cheaper a lot cheaper :)Yes, I found that hooking an air pump to the line and blowing them out seems to work well also. I'm topping mine to about 5 gallons now while I see how things go. I am pretty sure it was one of the additives I was using in the nutrient kit that was causing the slime to develop. and clog things.
Yes, I found that hooking an air pump to the line and blowing them out seems to work well also. I'm topping mine to about 5 gallons now while I see how things go. I am pretty sure it was one of the additives I was using in the nutrient kit that was causing the slime to develop. and clog things.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?