Council Of First Knowledge, Jedi Temple Training Facility

[EventHorizan]

The T5's have it... Will look into them right away and thank you once again...
I have this warm fuzzy feeling in my heart.... It's because i know my grows will only become better because of all of you....

Ya if money is tight, and u just want some smoke thats cheaper than 20 a gram, a 3x3 tent, and (3) 4' t5 on 3 sides of the tent standing length wise up would give you a nice lil bounty. Add a 2 light cob setup for flower and you could pull some nice nugs!

 

[Wisher619]

Hey @Wisher619 so push my thought process in the right direction..
Im chasing a few answers here...
1. What is the relationship between ingredients in tea..
Earth worm castings =
Molasses=

Is bacteria in the ewc?
Can you just brew tea with ewc, and molasses?
So then, = life, ogbiowar is just a bunch more diff beneficial bacteria?

2. Ogbiowar foliar pack....
Is this a ipm?
If I brew this and foliar my plants is this a ipm?
Can I brew +life and the foliar, and foiliar with that?
Can I make a foliar with epson + the foliar and use as a foliar together?

Some notes ....
I started my tea a week ago, and every day I stole a few cups out of it, and after a few days, i added ro back to it, and another serving of +life, and a another shot of molasses, and in 48 hrs I had a lot of foam, which really looked good, and it smells good.. Like a rich soil smell..
I feel like addidng back to my bubble tea bucket, it was even better...
I added back to it today too, but just water and molasses...
But im thinking if ewc has bacteria in it. then i might want to add another half cup to the tea brew bag...

Sry brother, I know its the holiday, so no big hurry on none of my questions...
You taught me a long time ago,,,
Don't panic, the marines havent landed yet...

Hope all is having a awesome day with the fam.. And better than my cubbies :(

yea to everything....that is the short answer

ewc has both Bacteria and Fungus
+life has both as well
and yeah you can foliar with any or all
and yes it would be considered IPM

 

[EventHorizan]

yea to everything....that is the short answer

ewc has both Bacteria and Fungus
+life has both as well
and yeah you can foliar with any or all
and yes it would be considered IPM

boom! Your better than
Wikipedia!
Much love brother!
Hope you are enjoying the fam and the holiday!

 

[EventHorizan]

Is spinosad considered ipm too?
As in Captain jacks...
Would it be beneficial to spray my plants in veg from time to time?
Being that I run high rh, i would want all moisture on leaf to be dried before lights out?
When is the best time to foliar inside?

 

[jipp]

Is spinosad considered ipm too?
As in Captain jacks...
Would it be beneficial to spray my plants in veg from time to time?
Being that I run high rh, i would want all moisture on leaf to be dried before lights out?
When is the best time to foliar inside?

well do not foliar before lights on you get light burn.. id say before lights out or hour ( this of course depends on your environment,.. my leafs are dry in 10 mins.. but will burn the fuck out of my leafs if i do it with lights on even with such a little time the water is on the leafs acting as magnifying glasses. ) before lights on if you can see in the dark.

chris.

 

[EventHorizan]

well do not foliar before lights on you get light burn.. id say before lights out or hour ( this of course depends on your environment,.. my leafs are dry in 10 mins.. but will burn the fuck out of my leafs if i do it with lights on even with such a little time the water is on the leafs acting as magnifying glasses. ) before lights on if you can see in the dark.

chris.

but what we need to take into account is that your rh is prob 40 and mine is 75% where i keep it.. I dont want no liquid at all on anything more than 2 hrs.. It takes 4 hrs for mold spores to spring into action.
With my high rh, it will dry slower.... im concerned about spraying at lights off..
and yep your very correct about droplets on leaves and light...
With that im trying to calculate when is the best time and how...
I think I will just turn down the lights for a little, foliar, wait 15 mins, flick the leaves to make sure no dropplets remain, wait another 45 mins and turn up the light.. I will run my exhaust the whole time to keep good air movement...

 

[jipp]

but what we need to take into account is that your rh is prob 40 and mine is 75% where i keep it.. I dont want no liquid at all on anything more than 2 hrs.. It takes 4 hrs for mold spores to spring into action.
With my high rh, it will dry slower.... im concerned about spraying at lights off..
and yep your very correct about droplets on leaves and light...
With that im trying to calculate when is the best time and how...
I think I will just turn down the lights for a little, foliar, wait 15 mins, flick the leaves to make sure no dropplets remain, wait another 45 mins and turn up the light.. I will run my exhaust the whole time to keep good air movement...

yeah man i hear ya but you are off a bit about my humid.. 40 percent would be like a rain forest here it is 22 percent humid atm and 110F.

chris.

 

[Wisher619]

Spinosad is def IPM
you can do it every other week for good practice
I would just raise the lights as high as possible at beginning of lights on and spray
then wait an hour or 2 and lower them back down
usually you would spray an hour before lights on but as long as the light isnt that close and your humidity is high they will be fine
you should be spraying the underside mostly.....that is where the bugs live

 

[Wisher619]

boom! Your better than
Wikipedia!
Much love brother!
Hope you are enjoying the fam and the holiday!

smokin and q'in
burgers and bacon wrapped dogs!!!

 

[EventHorizan]

yeah man i hear ya but you are off a bit about my humid.. 40 percent would be like a rain forest here it is 22 percent humid atm and 110F.

chris.

holy shit batman!

 

[EventHorizan]

Spinosad is def IPM
you can do it every other week for good practice
I would just raise the lights as high as possible at beginning of lights on and spray
then wait an hour or 2 and lower them back down
usually you would spray an hour before lights on but as long as the light isnt that close and your humidity is high they will be fine
you should be spraying the underside mostly.....that is where the bugs live

how about tea? top or bottom?
epson salt?
nutrients?
Im asking but you know im gonna go google :)
gonna go down and see how the girls are doing...
see if that fall stunted them....

 

[EventHorizan]

12 days...
Well they are growing good, but I feel like the leaves are laying like they havent woke up.. I didnt water them yet. I feel like I see first signs of mg deficiency coming on.. Im only at 1.5 ml calimag. My lights are prob 30 inches above. leaf temps are from 82 to 86 with laser tester.
What do you think? @Wisher619
I post a lot of pics so you had a few to diagnose from...

 

[EventHorizan]

smokin and q'in
burgers and bacon wrapped dogs!!!

hell ya!
It thundering here and looks like its gonna rain :(

 

[EventHorizan]

12 days...
Well they are growing good, but I feel like the leaves are laying like they havent woke up.. I didnt water them yet. I feel like I see first signs of mg deficiency coming on.. Im only at 1.5 ml calimag. My lights are prob 30 inches above. leaf temps are from 82 to 86 with laser tester.
What do you think? @Wisher619
I post a lot of pics so you had a few to diagnose from...

it looks overwatered and starving for 02 from some of the pics ive seen..
either way coco still looks moist
so im gonna skip a day of watering,,, :(
And monitor them between now and tomm....

 

[Wisher619]

how about tea? top or bottom?
epson salt?
nutrients?
Im asking but you know im gonna go google :)
gonna go down and see how the girls are doing...
see if that fall stunted them....

underside
that is where to stomata is and that is where the leaf absorbs nutrients as well as breaths in and out

 

[Wisher619]

it looks overwatered and starving for 02 from some of the pics ive seen..
either way coco still looks moist
so im gonna skip a day of watering,,, :(
And monitor them between now and tomm....

what is your ec again?
and what are you using? Grow or bloom or 3 part?
1.5ml cali is good
the grow should supply the rest
but you could either throw the sweetner in for Mg or 1/8th teaspoon epsom salt per gal

 

[EventHorizan]

what is your ec again?
and what are you using? Grow or bloom or 3 part?
1.5ml cali is good
the grow should supply the rest
but you could either throw the sweetner in for Mg or 1/8th teaspoon epsom salt per gal

1 ec on this batch. Week 2 on dtw feed chart.
Im using flora grow...
Do you think it looks like begin mg dif?
Or do you think im getting jumpy lol?
I just cant tell for sure...

 

[Wisher619]

1 ec on this batch. Week 2 on dtw feed chart.
Im using flora grow...
Do you think it looks like begin mg dif?
Or do you think im getting jumpy lol?
I just cant tell for sure...

I would up the ec to 1.3

probably gettin a little jumpy
what is your C02 lookin like
you cant run high c02 with such a low ec #
make sure the CO2 is the same as you ec so it should be 500 right now

 

[Wisher619]

oh @EventHorizan
do you have HID glasses or good polorized Sunglasses
helps alot to see the plants better even in MH

 

[EventHorizan]

Well no my ec was at 1.5 but i made my last batch at 1.0 ec
my c02 is still on factory setting of 1000
I was gonna bump right back to 1.5 on my next batch...