Cure Your Medicine by DJ Short

  • Thread starter Texas Kid
  • Start date
  • Tagged users None
StonedBlue

StonedBlue

Disabled Vet
Supporter
270
43
Using dry ice is a trick for turning ditch weed into slightly better pot. The co2 converts something or other into the but it is temp. This will do nothing for decent smoke.
 
StonedBlue

StonedBlue

Disabled Vet
Supporter
270
43
I have been meaning to build a drying box and will when I feel better. I have a huge ice chest that I plan on building racks into. A small intake at bottom and a small exhaust at top hooked to a humistat to keep humidity at a set point for slow dry. Then jar cure.
 
Snakeskins

Snakeskins

1,250
263
Nice post Tex!!!!

The number one thing that differentiates my herb from everyone else's is hanging the entire plant to cure, fan leaves and all.

Not only is it aesthetically superior, but also superior in taste.

DJ short a true livin legend...
For my first harvest, Im considering DJs instructions as well as your method of hanging the whole plant. And I must ask, why should light be avoided during this process?
 
K

Ko71

3
3
Cure Your Medicine by DJ Short

Proper curing can exponentially increase the quality and desirability of your harvest. The key word to remember is "slow".

Dark & Dry
After cutting the plant or branch, hang it upside down in a cool, dry, and most importantly dark place. Light must be avoided from this point on. Leave the larger shade leaves on and they will gently droop and wrap around the plant, protecting the buds.

The time to the next step depends on how dry your hanging area is. This requires regular checking to determine when to proceed. When the larger shade leaves become dry and brittle to the touch it is time to gently clip them off.

Re-hang the branches in the drying room and regularly check them until the smaller leaves and bud tips become dry and brittle to the touch. It is then time to remove the buds from the branch and remove the rest of the leaf material as best as possible. This is what is referred to as "manicuring".

Now you have a few choices as to what to do with your manicured buds. The buds should still be a little wet at this point, especially on the inside, but the outer part of the buds should be starting to feel dry. Some of the buds, the smaller ones in particular, might even be smokable at this point.

If you are in a more humid area, or if the buds are still feeling heavy with moisture, you may want to try placing them on a suspended screen for a little while. This will help to hasten the drying process. Once again, regular checking to decide when they are ready for the next stage is crucial. This is also a skill that is developed more with time and experience, so practice!

Brown Bagging It
Once the buds are crisp on the outside but still moist on the inside it is time for the next step in the process: the paper bag. I like to use brown paper shopping bags due to their not being bleached, an unwanted chemical.

Simply fill a paper bag a few inches deep with the manicured buds. Don't pack the buds down and do not fold the bag too tight. A few small folds at the top of the bag, like a lunch bag, should suffice.

If the buds are a tad wet or if humid conditions dominate, you might want to consider cutting a few small holes in the bag, above the level of the buds, for ventilation.

As with proper manicuring, regular checking is key. The bags should be gently shaken, ever-so-carefully turning the buds, at least once a day. As the buds dry they will naturally compact into the self-preserving state that we all know and love. It is at this time that the buds can be more compacted together and the bag folded down tighter. They should now be fully smokable, though perhaps still slightly damp at the core.

The entire process, from harvest to these first smokable products, should take anywhere from two to four weeks, depending on your climate. Extremes in climate, such as very arid deserts or tropical humid areas, may take more or less time. There is no substitute for consistent, hands-on checking.


The Final Stage
A final curing stage, preferred by most connoisseurs, involves sealable jars. The nearly ready buds are transferred from the bag to the jar, packed in very loosely, and the jar is sealed. It is very important in the early jar-stage to check the buds at least once a day.

I like to dump them all out of the jar and gently fluff them up at least once a day at first, then less often as time progresses, usually for a week to ten days. It is important to be as gentle as possible so as not to damage too many of the resin glands. After a week or so all I do is simply open the jar and check the buds on a daily basis.

Watch for Mold
The main thing to watch (and smell) for throughout all of the curing process is mold. Whenever mold is found it must be dealt with immediately. The moldy bud needs to be removed, and the rest of the product needs to be exposed to a drier environment for a while.

The simplest solution is to go back one step. For example, if the mold was detected in the jar stage simply put the rest of the product back to the bag stage for awhile (after removing the contaminated product from the batch). If the mold is detected in the bag stage, go back to the screen. The screen is the driest process that I know of. If problems with the mold occur prior to this, a dehumidifier in the drying room may be the answer.

Aside from watching and smelling for mold, always remember to keep the product in the dark.

Ready to go!
A bud is completely dry, cured, and ready for sale or consumption when the stem in the middle of the bud snaps when the bud is cracked with the fingers. The snap is easy to detect with practice. It is at this stage that the product can safely be sealed and stored for an indefinite period of time.

The longer you can stretch out this process, while also avoiding mold, the better. I like when it takes six to eight weeks from harvest to the finished product. You will be able to detect the fragrance of the product becoming more and more desirable as time progresses.

Another ditty I grabbed along the way

Tex
 
K

Ko71

3
3
I am at the point where my buds are getting dry to the touch almost ready for cure. Where do I try to snap the stem? Just right before the bud or elsewhere? When you touch the butt a little it has a very good aroma I just don't want to lose it by getting them off of the branches too early or late. Any help I would sure appreciate it
 
Snakeskins

Snakeskins

1,250
263
I am at the point where my buds are getting dry to the touch almost ready for cure. Where do I try to snap the stem? Just right before the bud or elsewhere? When you touch the butt a little it has a very good aroma I just don't want to lose it by getting them off of the branches too early or late. Any help I would sure appreciate it
Don't cure too early. I dried to the point where only the thinnest branch sort of snapped as this huge bud was very dry and brittle. I ended up realizing I started curing too early as the biggest stems within still contained alot of moisture and reintroduced it into the cure. That called for extra long open-jar time and then consequently I had too re-add moisture... anyways, lesson being, if your unsure, wait longer.
 
xenon730

xenon730

630
93
Don't cure too early. I dried to the point where only the thinnest branch sort of snapped as this huge bud was very dry and brittle. I ended up realizing I started curing too early as the biggest stems within still contained alot of moisture and reintroduced it into the cure. That called for extra long open-jar time and then consequently I had too re-add moisture... anyways, lesson being, if your unsure, wait longer.
I disagree. once you lose the moisture, you've messed up the cure. One of the points of jarring is to redistribute the moisture from the inside tissue to the outer evenly. I Think it would be better to jar at too wet and leave open or even take back out then to damage the cure by going too far. Like overdosing, you can always make it dryer but once its too dry, you messed up your cure.
 
J

JPF 9

4
1
Cure Your Medicine by DJ Short

Proper curing can exponentially increase the quality and desirability of your harvest. The key word to remember is "slow".

Dark & Dry
After cutting the plant or branch, hang it upside down in a cool, dry, and most importantly dark place. Light must be avoided from this point on. Leave the larger shade leaves on and they will gently droop and wrap around the plant, protecting the buds.

The time to the next step depends on how dry your hanging area is. This requires regular checking to determine when to proceed. When the larger shade leaves become dry and brittle to the touch it is time to gently clip them off.

Re-hang the branches in the drying room and regularly check them until the smaller leaves and bud tips become dry and brittle to the touch. It is then time to remove the buds from the branch and remove the rest of the leaf material as best as possible. This is what is referred to as "manicuring".

Now you have a few choices as to what to do with your manicured buds. The buds should still be a little wet at this point, especially on the inside, but the outer part of the buds should be starting to feel dry. Some of the buds, the smaller ones in particular, might even be smokable at this point.

If you are in a more humid area, or if the buds are still feeling heavy with moisture, you may want to try placing them on a suspended screen for a little while. This will help to hasten the drying process. Once again, regular checking to decide when they are ready for the next stage is crucial. This is also a skill that is developed more with time and experience, so practice!

Brown Bagging It
Once the buds are crisp on the outside but still moist on the inside it is time for the next step in the process: the paper bag. I like to use brown paper shopping bags due to their not being bleached, an unwanted chemical.

Simply fill a paper bag a few inches deep with the manicured buds. Don't pack the buds down and do not fold the bag too tight. A few small folds at the top of the bag, like a lunch bag, should suffice.

If the buds are a tad wet or if humid conditions dominate, you might want to consider cutting a few small holes in the bag, above the level of the buds, for ventilation.

As with proper manicuring, regular checking is key. The bags should be gently shaken, ever-so-carefully turning the buds, at least once a day. As the buds dry they will naturally compact into the self-preserving state that we all know and love. It is at this time that the buds can be more compacted together and the bag folded down tighter. They should now be fully smokable, though perhaps still slightly damp at the core.

The entire process, from harvest to these first smokable products, should take anywhere from two to four weeks, depending on your climate. Extremes in climate, such as very arid deserts or tropical humid areas, may take more or less time. There is no substitute for consistent, hands-on checking.


The Final Stage
A final curing stage, preferred by most connoisseurs, involves sealable jars. The nearly ready buds are transferred from the bag to the jar, packed in very loosely, and the jar is sealed. It is very important in the early jar-stage to check the buds at least once a day.

I like to dump them all out of the jar and gently fluff them up at least once a day at first, then less often as time progresses, usually for a week to ten days. It is important to be as gentle as possible so as not to damage too many of the resin glands. After a week or so all I do is simply open the jar and check the buds on a daily basis.

Watch for Mold
The main thing to watch (and smell) for throughout all of the curing process is mold. Whenever mold is found it must be dealt with immediately. The moldy bud needs to be removed, and the rest of the product needs to be exposed to a drier environment for a while.

The simplest solution is to go back one step. For example, if the mold was detected in the jar stage simply put the rest of the product back to the bag stage for awhile (after removing the contaminated product from the batch). If the mold is detected in the bag stage, go back to the screen. The screen is the driest process that I know of. If problems with the mold occur prior to this, a dehumidifier in the drying room may be the answer.

Aside from watching and smelling for mold, always remember to keep the product in the dark.

Ready to go!
A bud is completely dry, cured, and ready for sale or consumption when the stem in the middle of the bud snaps when the bud is cracked with the fingers. The snap is easy to detect with practice. It is at this stage that the product can safely be sealed and stored for an indefinite period of time.

The longer you can stretch out this process, while also avoiding mold, the better. I like when it takes six to eight weeks from harvest to the finished product. You will be able to detect the fragrance of the product becoming more and more desirable as time progresses.

Another ditty I grabbed along the way Thnx for laying it dwn Yo! Im mos def having too hi temps coupled w/ low RHL so i put 5 gallong buckets filled w/ H2O & fan blowing over but herevin beautiful dwn twn Burbank we've some Santa Ana's & im getting hay smell after hanging in dark( after washing & clioping fan leaves,i foilar sprayed and had Broad mites the 'damn microscopic hairy Bastards!)for couple days,ifctgrcstem almost snapped ,a little stringy left, I'd then bag for another 2 days then Jar it Up..my temp having been 70's - 80's& above (Boo!) In daytimes with 60' s at night and RHL from 30's to 50's! So i bought a humidifier need thos drying to slo the F up! The whole neighbor hood smells like B Marley's gitch when i brush against plant but some how the hot ,dry garage is buggering my dry/ cure ! Read somewhere after couple days drying in paper, people put paper bags into black plastic garbagio bags & it reintroduces The Bob Hope to moisture? PTL baby!! Humifier c'mon on ,floor it Dano! TY Willie!

Tex
 
Indoapache

Indoapache

8
3
Can anyone recommend a hanging temperature/humidity PLEASE? If I have overlooked it please forgive me.
 
Growjob82

Growjob82

5
13
You should get a room hygrometer to see the actual RH of the room . Depending on the RH you would set your de humidifier accordingly . Def want to keep the room RH about 50-55% RH.
When the plants are hanging I have a dehumidifier.

I set it as low as I can. Is this ok? The reason I do this is to get the buds dry as soon as possible to avoid Mold.
 
G

Godfthrfarm

64
18
Nice post Tex!!!!

The number one thing that differentiates my herb from everyone else's is hanging the entire plant to cure, fan leaves and all.

Not only is it aesthetically superior, but also superior in taste.

DJ short a true livin legend...
Yes no other way bro I've tried w leaves cut off and w all on ...the smell the taste is above the rest when dried in its original form while plant leaves on..supreme..
 
Dukeknight

Dukeknight

1
1
Thank you, I appreciate the keep it simple method. I too am an anxious grower and want to sample the fruits of my labor. After the initial dry, I set a batch aside for personal use and cure the rest properly. The cured bud is smoother, less piney/green tasting and burns better.
Anyone tried curing in a bourbon barrel? Combining two favorites has me intrigued.
 
Top Bottom