desperately In need of advice!

[ayeob]

Yep 100% that water when she uptakes it will carry the neuts up with it, that’s all she needs only reason I’d back down or switch to feeding every other watering is if she started showing a neut burn (toxicity) but you’ll have time to take care of it.

My one plant in its own 4x4 has had reduced neuts cus she was quite stressed but also was the reason she didn’t pack in as much weight at the end, she’s almost don’t but wished I had more time to correct her before flower

@GNick55 I have my fans blowing directly on the plants too I kinda maxed out the 4x8 though lol so I have 5 fans in there haha as soon as the solo plant finishes I’ll pull the biggest plant from the other tent and put her in there to finish by herself

Photos are the 4x4 tent

Video is the 4x8 tent

Also disregard the temp and RH I need to move that gauze it’s about 8” below the light lol, the temp on the top (larger number) is from the outdoor monitor device which is on the other side of the tent at cola height RH shows about 5% higher at plant level but there still out of VPD for the growth cycle

gotcha yeah i always thought i was going to have some burn on it and i wasn’t even feeding it enough to have it burn lol. but yours look really good! the stalk looks awesome.

@GNick55 was it you who said that i should cut some leaves from the bottom of the stalk or was it someone else in the thread?

@Mikedin what strain is yours?

 

[GNick55]

Yep 100% that water when she uptakes it will carry the neuts up with it, that’s all she needs only reason I’d back down or switch to feeding every other watering is if she started showing a neut burn (toxicity) but you’ll have time to take care of it.

My one plant in its own 4x4 has had reduced neuts cus she was quite stressed but also was the reason she didn’t pack in as much weight at the end, she’s almost don’t but wished I had more time to correct her before flower

@GNick55 I have my fans blowing directly on the plants too I kinda maxed out the 4x8 though lol so I have 5 fans in there haha as soon as the solo plant finishes I’ll pull the biggest plant from the other tent and put her in there to finish by herself

Photos are the 4x4 tent

Video is the 4x8 tent

Also disregard the temp and RH I need to move that gauze it’s about 8” below the light lol, the temp on the top (larger number) is from the outdoor monitor device which is on the other side of the tent at cola height RH shows about 5% higher at plant level but there still out of VPD for the growth cycle

ya your pretty jammed up in there but it’s working for you, no signs of wind stress or burn, nice!

 

[GNick55]

gotcha yeah i always thought i was going to have some burn on it and i wasn’t even feeding it enough to have it burn lol. but yours look really good! the stalk looks awesome.

@GNick55 was it you who said that i should cut some leaves from the bottom of the stalk or was it someone else in the thread?

@Mikedin what strain is yours?

i did but other than the watering tomorrow i don’t want you touching them for 4-5 days, nothing just let them be and post pictures everyday

 

[ayeob]

i did but other than the watering tomorrow i don’t want you touching them for 4-5 days, nothing just let them be and post pictures everyday

aye aye captain lol really do appreciate your continued help!

 

[Mikedin]

ya your pretty jammed up in there but it’s working for you, no signs of wind stress or burn, nice!

Nope! But I have some scattered PM I’m dealing with a 2nd run in a row, another reason if so many fans I felt like I had stagnant air in the corners, after this run everything comes down and I reset everything the way I actually want it then I can get to business lol

Gunna be a massive cleaning of everything and it’ll stay empty for a few weeks at least and I’ll sanitize everything 2-3 times I have a feeling it’s because I didn’t clean good enough after the last run and it started back up again, I’m fighting it with 1 part peroxide to 3 parts water, foliar spray every 2-3 days, it did help but I still see a bit here and there so it’s a constant battle in this grow till harvest, hopefully no loss

 

[Mikedin]

i did but other than the watering tomorrow i don’t want you touching them for 4-5 days, nothing just let them be and post pictures everyday

In addition to that, I know I’m not a pro at identification but @ayeob if you notice leaves with discolorings etc that you haven’t noticed before be sure to take pics and post them here, even if it’s nothing, early identification of deficiencies is what you want, if you can catch it early it’s much easier to correct instead of chasing a in progress issue (like what you’re going through now)

 

[GNick55]

Nope! But I have some scattered PM I’m dealing with a 2nd run in a row, another reason if so many fans I felt like I had stagnant air in the corners, after this run everything comes down and I reset everything the way I actually want it then I can get to business lol

Gunna be a massive cleaning of everything and it’ll stay empty for a few weeks at least and I’ll sanitize everything 2-3 times I have a feeling it’s because I didn’t clean good enough after the last run and it started back up again, I’m fighting it with 1 part peroxide to 3 parts water, foliar spray every 2-3 days, it did help but I still see a bit here and there so it’s a constant battle in this grow till harvest, hopefully no loss

yep just went through it, i had to spray daily and wash the buds after., made oil out of it.,
that pm is evil it’ll hide in your buds as well,,
good luck

 

[Mikedin]

yep just went through it, i had to spray daily and wash the buds after., made oil out of it.,
that pm is evil it’ll hide in your buds as well,,
good luck

Yep I had some loss on the last run, it’s not great but I’m learning, I always though PM favored high RH i read it’s actually Low RH that it prefers, I’m nervous to raise the RH in the room though even though it would help my VPD I feel it would help the PM grow faster so I’ve been keeping the dehu at 35%

 

[ayeob]

i know it isn’t time yet but i am definitely going to need help with the drying process because my last harvest my buds dried very quickly and i was so worried about humidity and temp being on point that i didn’t check them…and it was not enjoyable to smoke.

 

[GNick55]

Yep I had some loss on the last run, it’s not great but I’m learning, I always though PM favored high RH i read it’s actually Low RH that it prefers, I’m nervous to raise the RH in the room though even though it would help my VPD I feel it would help the PM grow faster so I’ve been keeping the dehu at 35%

it’s really neither pm is always around it just needs large swings in temp and humidity to attack plants..
i’ve heard plants feed with high nitrogen levels are easily susceptible to it.. etc
it’s just evil and i hate dealing with it..

 

[Cirroji]

Yep I had some loss on the last run, it’s not great but I’m learning, I always though PM favored high RH i read it’s actually Low RH that it prefers, I’m nervous to raise the RH in the room though even though it would help my VPD I feel it would help the PM grow faster so I’ve been keeping the dehu at 35%

I assumed this is what’s happens and why it’s confusing with low RH AND PM.

My idea on that is that when your lights go off if you have high humidity when the air cools the RH drops and in a sealed environment the moisture doesn’t really have anywhere to go besides settling on the plants making them extra moist - as I think PM needs water to get going.

Am I making any sense or am I too stoned

 

[Mikedin]

i know it isn’t time yet but i am definitely going to need help with the drying process because my last harvest my buds dried very quickly and i was so worried about humidity and temp being on point that i didn’t check them…and it was not enjoyable to smoke.

One step at a time young grasshopper don’t worry we won’t abandon you!

 

[Mikedin]

I assumed this is what’s happens and why it’s confusing with low RH AND PM.

My idea on that is that when your lights go off if you have high humidity when the air cools the RH drops and in a sealed environment the moisture doesn’t really have anywhere to go besides settling on the plants making them extra moist - as I think PM needs water to get going.

Am I making any sense or am I too stoned

In theory it sounds right, but if your fans and exhaust are correct and no stagnant air you should really never get any condensation in the leaves, if the water is on the leaves transpiration will suffer, just means add more fans or stronger exhaust really

If I notice 2 leaves touching and condensation under them I try to tuck one away, if it’s stubborn one gets the scissors

 

[ayeob]

One step at a time young grasshopper don’t worry we won’t abandon you!

okay good! yeah not trying to get ahead of myself but i wanted to put it out there that i had a hard time with that.

 

[ayeob]

WATERING WENT VERY WELL! let me know if the technique i used was good.

so the first pictures are the before watering.
i also added some videos of me watering and i did see some water leaking out the sides but not to much. then all the sudden i see a pool at the bottom of the plastic holder which is good because it didn’t come out the sides anymore and i assume all that water came from the bottom.
then i put the last of it in my sprayer to get the top of the medium all moist because pouring the cup didn’t get all of the top.

when i checked a little bit ago the water was being soaked up and was almost all gone.

i also added some pictures of how i put my 2 fans to see if this is okay for more air flow. i do have another white hurricane fan that i could use for a 3rd fan but i would need to know where to put them. let me know if my fans are in good position for good airflow and if you think i’d need another one. only other reason why i only had one fan was because my humidity fluctuates. my hygrometers read differently and so does my humidifier.

 

[Goodshit97]

WATERING WENT VERY WELL! let me know if the technique i used was good.

so the first pictures are the before watering.
i also added some videos of me watering and i did see some water leaking out the sides but not to much. then all the sudden i see a pool at the bottom of the plastic holder which is good because it didn’t come out the sides anymore and i assume all that water came from the bottom.
then i put the last of it in my sprayer to get the top of the medium all moist because pouring the cup didn’t get all of the top.

when i checked a little bit ago the water was being soaked up and was almost all gone.

i also added some pictures of how i put my 2 fans to see if this is okay for more air flow. i do have another white hurricane fan that i could use for a 3rd fan but i would need to know where to put them. let me know if my fans are in good position for good airflow and if you think i’d need another one. only other reason why i only had one fan was because my humidity fluctuates. my hygrometers read differently and so does my humidifier.

Just what i noticed

All those leaves in the pot gotta go, even the green ones. They are just inviting pests and pathogens sitting in the soil rotting away.

 

[ayeob]

Just what i noticed

All those leaves in the pot gotta go, even the green ones. They are just inviting pests and pathogens sitting in the soil rotting away.

which leaves?

 

[Goodshit97]

which leaves?

Anything hanging in or just above the soil. It was your last video i saw it all in.

 

[ayeob]

Anything hanging in or just above the soil. It was your last video i saw it all in.

okay so i should trim the up with my scissors? also how far up? going to take pictures and if you could show me on the picture that would be great.

 

[ayeob]

@Goodshit97 just don’t want to take off too much ya know?