Devil Anse Hatfield Inc......

[EventHorizan]

Got the insulation up all the way around now. Just need to hang drywall on this side now.. This room is gonna be so sealed when I'm done! I'm gonna handle this whole room with my 5000btu Ac.....

 

[EventHorizan]

In the corner hanging down is my intake. It comes from a 400cfm fan outside the room hooked straight to the furnace.
Then you see my carbon filter which is hooked to my 400cfm fan that runs out the room and hooks in to my duct that feeds my bedroom/living room vents...
The only time my exhaust kicks on is when the heat kicks on in the house. As soon as Temps hit 80 my controller kicks on exhaust. My intake fan that's hooked between the intake and furnace is being controlled by my humidity setting on my controller. So if it's above 50 rh it kicks the intake fan on and it pulls air thru the house heating vent system from upstairs where it's warmer and less humid.. I know that sounds crazy but it's working like a charm...
I set my house thermostat to control the lights out Temps at 68...

 

[Irietime]

I thought about that and here was what i decided... Your gonna love this!
First i checked to see how hot it got with lights on. 65.7 degrees. Exactly as i thought! So i decided instead of pulling the buckets off the floor im adding a aquarium heater that is rated for 150 gallons. My set up is 20 gallons. I will set the digital temp at 68 degrees and it will maintain my water temp. I also bought BATMAN windshield reflectors for each of the buckets... BOOM!



Crazy! But i think i like the spreading better in the one above! But i take either one or both lol!

Rh and temps..... They impact each other. I want higher rh, about 55% to 60 % would be ideal for me. And temps around 73 to 74 is where i would like it.
I think when you have high rh and its 80's esp above 85, then you start to ask for problems. But air flow and air circulation all make up that equation. Here is how i know if its all right. I roll a big fat hog leg, pull up a lawn chair in the grow room, smoke that bitch and see how i feel... Hot? humid? brezzy? It is actually very very comfortable in there right now. After leaving for a few and cycling the rest of the house, it has even out at 75 degrees and 52.7 rh... I fucking love it!

Sounds like it's California in there:)

 

[EventHorizan]

Girls are 28 days old today..
Starting week 5 tomm

 

[EventHorizan]

Sounds like it's California in there:)

It sure feels like it! Its a lot cooler than my tent was! I still got a lot of work to do tho. I need to spray foam all my corners, crack, and crevices. Hang more drywall, the seal up the door. Then Im building a closet with a fake back that will hide the grow room door, and equipment. And I will set that up, as my kids room. When she comes for the summer, she wants my room anyway. She said its only gentleman like that i should give up the upstairs master bedroom. So i said i would.. hehehehehehe That worked out well! Shit when i was 13 i wanted the basement lol!

 

[EventHorizan]

Dude!! Looking awesome :) is that RH considered high?

btw i was thinking about you when i was in the garden....

 

[Wisher619]

btw i was thinking about you when i was in the garden....

tryin to compete with my leaf status I see!!!!

 

[mandalaman]

Haha, awesome @EventHorizan that first one is a beefy nine finger. Gorgeous. Here's a little guy I took tonight. I'm updating my thread too shortly.

 

[EventHorizan]

Damn. I fell out last night as soon as my head hit the pillow. ..

 

[EventHorizan]

Haha, awesome @EventHorizan that first one is a beefy nine finger. Gorgeous. Here's a little guy I took tonight. I'm updating my thread too shortly.

View attachment 661712

Cool.. lil fella

 

[EventHorizan]

I wish there was a way I could move all 3 my grow diary threads into one threads.

 

[EventHorizan]

Well I guess up and get some breakfast, then back downstairs to finish this project. ...

 

[EventHorizan]

I've been looking at the cloners. I see clonekings for about half the price of ez cloners and turbo cloners. . Most things have a reason for costing more. I have no experience with sprayers. Any advice? Explanation for price difference. Is cheap as good as expensive?
I take opinions but state them as thst. If you have used one I'm really eager to hear your thoughts.

 

[Wisher619]

I've been looking at the cloners. I see clonekings for about half the price of ez cloners and turbo cloners. . Most things have a reason for costing more. I have no experience with sprayers. Any advice? Explanation for price difference. Is cheap as good as expensive?
I take opinions but state them as thst. If you have used one I'm really eager to hear your thoughts.

sorry brother I have no experience with any clone machine
I made one once.....had no real luck at cloning

 

[EventHorizan]

sorry brother I have no experience with any clone machine
I made one once.....had no real luck at cloning

Ya I will do some reading and see what I can find. Well back to work.. it's been doing really great in the room It's lights off right now and my room is 68 and my water is 67. And my rh is 59 , ec 1.9, and pH 5.9
I'm pretty happy with those numbers!

I see co2 in my future!
As long as I don't run the heat in my house, it stays at 68 up stairs and my exhaust Never kicks on. My room gets up to 78 without no exhaust at lights on... I'm sure after drywall and door sealer I should really be able to control this room.

 

[Wisher619]

Ya I will do some reading and see what I can find. Well back to work.. it's been doing really great in the room It's lights off right now and my room is 68 and my water is 67. And my rh is 59 , ec 1.9, and pH 5.9
I'm pretty happy with those numbers!

I see co2 in my future!
As long as I don't run the heat in my house, it stays at 68 up stairs and my exhaust Never kicks on. My room gets up to 78 without no exhaust at lights on... I'm sure after drywall and door sealer I should really be able to control this room.

you should check Co2 levels that are already there
basements and especially around furnaces exude massive amounts of Co2
as a matter of fact I have seen someone use there furnace exhaust and tap in and hook to a controller in order to release as wich C02 as needed
pretty sweet
I will post a video of it

 

[Wisher619]

 

[EventHorizan]

you should check Co2 levels that are already there
basements and especially around furnaces exude massive amounts of Co2
as a matter of fact I have seen someone use there furnace exhaust and tap in and hook to a controller in order to release as wich C02 as needed
pretty sweet
I will post a video of it

Very interesting! I have my intake coming straight off the furnace output for the front of house. Even when the heat is not on its pulling air thru the furnace. I wonder if im getting any co2 thru there? Im gonna take some pics of my furnace. ITs pretty new and its high efficiency. It has 2 -3" pvc pipes that exhaust out of my house. One puts off like a dryer when the heats on and the other i cant tell but i can hear it.

That was pretty cool

 

[EventHorizan]

As you can see there is 2 pvc lines coming off the furnace. One goes to one side of the house, and the other one to the other. Could it be intake and exhaust? Or one is gas and the other humidity. I didnt realize i was this stupid on furnaces. I mean i can google and find out real quick im ssure. But i got a lot of labor left to do today. I check back in a couple hrs see what you said.. And thanks wisher, you been here every step of the way. My continued success is greatly influenced by your assistance!

 

[EventHorizan]

Things are going slow today! That and I'm all thumbs!