Log In Register

DTW liberty haze, masterblend nutrients.

  • Thread starter Thread starter mark360jones
  • Start date Start date
  • Tagged users Tagged users None

DTW liberty haze, masterblend nutrients.

mark360jones 69 Replies 9,418 Views
Page 1 of 4 · Replies 1–20 of 70
mark360jones

mark360jones

Posts
102
Reactions
71
Joined
Mar 8, 2020
Points
28
So 1st I'd like to say I don't know how these girls have survived. I took cutting from a friend and put them into an aeroponic propagator. After 2 week there was still no roots so I just left them and basically forgot about (1st time using an aero propagator) them as I was waiting on another friend for cuttings. I noticed that the pump was still running another 2 weeks later as it was making a noise due to the water level being virtually non existant. The pH meter was reading 3.5 the stems was red/purple by then and the roots was intertwined with each other and the pump. I picked the healthiest looking 8 and trimmed the roots from the spaghetti junction, I dusted the roots with some great white myco and potted them into a coco perlite mix. I started feeding them masterblend sumo silicone mix I've used for early veg in the past and the plants have been growing, im scrog 4 plants and let the other 4. I thought they had fully started reviving and coming round as the red/purple stems seemed to be getting better and the plants was growing. Now I've checked and the stems a still slightly purple but the leaves as light green and the veins a darker shade also some deformed leaf now showing. Anyone got any advice? Ph 6.1 ec 1.4 day temp never goes above 25c and night temp never below 20. Humidifier is running constantly as I'm finding it really had to get above 30 (better Humidifier is on its way) hopefully should get it 45+.
 

Attachments

  • dtw-liberty-haze-masterblend-nutrients.jpg
    dtw-liberty-haze-masterblend-nutrients.jpg
    253.7 KB · Views: 158
  • dtw-liberty-haze-masterblend-nutrients-2.jpg
    dtw-liberty-haze-masterblend-nutrients-2.jpg
    163.9 KB · Views: 153
  • dtw-liberty-haze-masterblend-nutrients-3.jpg
    dtw-liberty-haze-masterblend-nutrients-3.jpg
    199.9 KB · Views: 148
  • dtw-liberty-haze-masterblend-nutrients-4.jpg
    dtw-liberty-haze-masterblend-nutrients-4.jpg
    146.6 KB · Views: 146
  • dtw-liberty-haze-masterblend-nutrients-5.jpg
    dtw-liberty-haze-masterblend-nutrients-5.jpg
    107.2 KB · Views: 147
  • dtw-liberty-haze-masterblend-nutrients-6.jpg
    dtw-liberty-haze-masterblend-nutrients-6.jpg
    183.3 KB · Views: 140
  • dtw-liberty-haze-masterblend-nutrients-7.jpg
    dtw-liberty-haze-masterblend-nutrients-7.jpg
    193.5 KB · Views: 139
  • dtw-liberty-haze-masterblend-nutrients-8.jpg
    dtw-liberty-haze-masterblend-nutrients-8.jpg
    181.4 KB · Views: 141
  • dtw-liberty-haze-masterblend-nutrients-9.jpg
    dtw-liberty-haze-masterblend-nutrients-9.jpg
    155.7 KB · Views: 135
  • dtw-liberty-haze-masterblend-nutrients-10.jpg
    dtw-liberty-haze-masterblend-nutrients-10.jpg
    167.2 KB · Views: 135
  • dtw-liberty-haze-masterblend-nutrients-11.jpg
    dtw-liberty-haze-masterblend-nutrients-11.jpg
    119.2 KB · Views: 134
  • dtw-liberty-haze-masterblend-nutrients-12.jpg
    dtw-liberty-haze-masterblend-nutrients-12.jpg
    130.8 KB · Views: 139
I'm drain to waste, there on for 30 secs 5 times a day, getting about 8/10 l run off a day. I dont really measure what goes in amount wise, I just make sure the pH is between 5.9 and 6.0 going in and the ec is no more than .3 more coming out than what is going in. Never had this problem before but saying that never brought plants like this back from the brink of death
 
Last edited:
Any indication of root damage?

Sounds like you have run this same setup successfully before? What has changed besides the plants?
 
Any indication of root damage?

Sounds like you have run this same setup successfully before? What has changed besides the plants?
Other than at the start I had to cut them, the growth on the plants was doing well too. Ive been adding great white to the rez and keeping the rez temp 16c. Ive run this set up quite a few times, consistently with good results. As I cut the roots at the start I was spraying the cutting twice a day for the 1st week with formulex
 
I do have silver bullet to hand but don't like using it till flower as I like the myco to do its job and get a good root system. Just hope I'm not pissing in the wind with this one and regret that I should of scrapped them
 
Lets hope the humidity fixes it. Sounds like a good plan to me. I'm thinking of within 24 hours of getting it up plants will settle down.

I'm gonna guess you are growing in a basement in Northern Europe? Cold and dry outside?
 
I do have silver bullet to hand but don't like using it till flower as I like the myco to do its job and get a good root system. Just hope I'm not pissing in the wind with this one and regret that I should of scrapped them
H2O2?
 
No built a room upstairs, centre of my house. Northern Europe yep your correct there and it cold too. Inlet is from the room next door
 
What humidifier? If your lung room is your whole house you will need to go pretty damn big. But it makes the humans feel better too.

I use a series of 5 ultrasonic fogging disks made into a plastic float which is in a pail fed by RO thru a float valve. 10 disks would be enough to condition my whole house. The actual humidifier is under 88EUR the problem is the water source. You pretty much have to use RO when you put that much water thru the system.

This is a cool site to get ideas:

 
What humidifier? If your lung room is your whole house you will need to go pretty damn big. But it makes the humans feel better too.

I use a series of 5 ultrasonic fogging disks made into a plastic float which is in a pail fed by RO thru a float valve. 10 disks would be enough to condition my whole house. The actual humidifier is under 88EUR the problem is the water source. You pretty much have to use RO when you put that much water thru the system.

This is a cool site to get ideas:

The lung room is a bedroom. The new humidifier is made by G.A.S sonikair humidifier the old one is going in the bin. I have my ecotechnics fan controller set min 25 and max 70 for the in and out fan, heater is set to come on at 20degrees to keep the night temps under controll I have an inkbird humidity controller inside the room so hoping to keep the humidifier in there with it. Scratching my head with this one, fingers crossed its the rh that's the problem.
 
Lets hope the humidity fixes it. Sounds like a good plan to me. I'm thinking of within 24 hours of getting it up plants will settle down.

I'm gonna guess you are growing in a basement in Northern Europe? Cold and dry outside?
So after 30 mins the rh has gone up considerably and is still rising, I've got it set to shut off at 60 with a 5 differential up/down high alarm is set to 75 and low alarm is set at 45
 

Attachments

  • 20220217_114605.jpg
    20220217_114605.jpg
    99.2 KB · Views: 111
  • 20220217_121401.jpg
    20220217_121401.jpg
    143.6 KB · Views: 108
Last edited:
Noice. Lets see those plants again after they have time to breathe.

Once you get VPD under control you may have to make some minor adjustments but I'm hoping this gets you where you need to be.
 
Noice. Lets see those plants again after they have time to breathe.

Once you get VPD under control you may have to make some minor adjustments but I'm hoping this gets you where you need to be.
How you measuring leaf temp. I can't really get an accurate VPD as I've not got the leaf temp measurement.
 
I use an ir temp gun. I don’t have a European link but the are used for lots of things like cooking. Point and soot at leaf read temp.
 
So they do seem slightly better not much but it's only been 2hrs. Do you think a mild nutrient foliar could help bring them back if there's not change tomorrow's
 

Attachments

  • 20220217_130321.jpg
    20220217_130321.jpg
    159.8 KB · Views: 101
  • 20220217_130409.jpg
    20220217_130409.jpg
    151.3 KB · Views: 103
  • 20220217_130338.jpg
    20220217_130338.jpg
    193.9 KB · Views: 100
  • 20220217_130515.jpg
    20220217_130515.jpg
    136.7 KB · Views: 103
  • 20220217_130554.jpg
    20220217_130554.jpg
    215.9 KB · Views: 101
Page 1 of 4 · Replies 1–20 of 70
Back
Top Bottom