GAVITA

GR33NL3AF · Jun 11, 2014

They've landed!

The Gavita Pro 600/750 E series will be here towards the end of the month...
These fixtures are badass!

In other news - Gavita is working on a fixture specific for commercial application. These fixtures will be 1000w, 277v and WILL NOT offer the dimming feature.

GL

GR33NL3AF · Jul 17, 2014

And.... These bad boys! Our company has a small amount still unclaimed!

dumpstergrower · Jul 17, 2014

I need to step my game up

Kendo · Jul 20, 2014

I picked up 4 of these badboys last month

WTF!!!!!

My scrogs have never been so incredibly full. lots of work clearing and pruning. Super short internodal length.

Heat is def an issue so I added 650cfm additional ventilation. running at 87f on cycle. Also, the distance between the canopy and the light really needs to be 2 1/2' 3' away at full power as the Gavita's put out some BLAZING rays at 1150w

Kendo · Jul 20, 2014

7' ceilings make it a bit tuff. 2' base screen then 2' max of stretch 2 1/2' -3' of clearance. Not running Stretchy girls in there.
Blockhead, OG, IDKWTFII.

dumpstergrower · Jul 20, 2014

@Kendo these light must have a max distance from the canopy

GR33NL3AF · Jul 20, 2014

1000w Gavitas need to have ATLEAST 40" from canopy..

Kendo · Jul 20, 2014

40"
I am at 30"-36" with stretch done. I will keep an eye and turn em down if I see any bleaching.

waayne · Jul 20, 2014

@Kendo I think you'll be OK at 30"-36" if you can keep the temps in check
This TK got away from me a bit in flower as I was busy and didn't LST her
These flowers are at day 48,and I haven't had any issues,but I have made sure the temps never
go over 75-76 degrees during lights on.
I have bumped the food up a bit as well.

These are 30"- 36" away from Gavita DE 1000's
I'm running the Gavitas on the 1150 setting

Scone_of_Ark · Jul 20, 2014

I have made sure the temps never go over 75-76 degrees during lights on.

That's about all there is to it.

Kendo · Jul 20, 2014

waayne said:
@Kendo I think you'll be OK at 30"-36" if you can keep the temps in check
This TK got away from me a bit in flower as I was busy and didn't LST her
These flowers are at day 48,and I haven't had any issues,but I have made sure the temps never
go over 75-76 degrees during lights on.
I have bumped the food up a bit as well.

These are 30"- 36" away from Gavita DE 1000's
I'm running the Gavitas on the 1150 setting

The room operates at 80 and heats up at AM 10ish during the last 1 1/2 hour to 87. I will reroute the intake vent and draw from underneath. Will also add 2 more oscillating fans to circulate more air. will try to keep her down that way. Thanks for the info.
I will be much more prepared next run with a shorter scrog profile. Fuck it! I will move the Gavitas in 3 weeks to the room opening up. and keep the girls in UBER low profile mode. The room I will be transferring into is easier to keep cool anyway so win-win.
I noticed they seem to be needing more. I upped the food and can see they want even more.
AHHH dialing em in is half the fun..
Again thanks.

GR33NL3AF · Jul 20, 2014

waayne said:
@Kendo I think you'll be OK at 30"-36" if you can keep the temps in check
This TK got away from me a bit in flower as I was busy and didn't LST her
These flowers are at day 48,and I haven't had any issues,but I have made sure the temps never
go over 75-76 degrees during lights on.
I have bumped the food up a bit as well.

These are 30"- 36" away from Gavita DE 1000's
I'm running the Gavitas on the 1150 setting
View attachment 424896
View attachment 424897

Damn WAYNE, killin it!

fishwhistle · Jul 20, 2014

Waaynes always killin it green!

Texas Kid · Jul 20, 2014

I heard that they are sending out notices to all the distributors and sales venues that the electronic data link components are melting down. I guess it is the RJ45 cord set components or something used with the EL1 and EL2 controllers are not taking the heat associated with the ballast, the ones I have apparently don't have the newer version upgrade so I lucked out but my supplier will not sell the new ones to anybody for a bit until they get it all sorted out from the factory.

Kendo · Jul 20, 2014

Texas Kid said:
I heard that they are sending out notices to all the distributors and sales venues that the electronic data link components are melting down. I guess it is the RJ45 cord set components or something used with the EL1 and EL2 controllers are not taking the heat associated with the ballast, the ones I have apparently don't have the newer version upgrade so I lucked out but my supplier will not sell the new ones to anybody for a bit until they get it all sorted out from the factory.

Guess I will be on the phone tomorrow. Thanks @Texas Kid

toquer · Jul 20, 2014

Texas Kid said:
I heard that they are sending out notices to all the distributors and sales venues that the electronic data link components are melting down. I guess it is the RJ45 cord set components or something used with the EL1 and EL2 controllers are not taking the heat associated with the ballast, the ones I have apparently don't have the newer version upgrade so I lucked out but my supplier will not sell the new ones to anybody for a bit until they get it all sorted out from the factory.

Will have to look at mine tomorrow as well.

GR33NL3AF · Jul 20, 2014

Will look into this tomorrow, thanks brother

fishwhistle · Jul 20, 2014

green,when is the 750 de supposed to have availibility again?

toquer · Jul 20, 2014

fishwhistle said:
green,when is the 750 de supposed to have availibility again?

green, did mine ship today?

GR33NL3AF · Jul 20, 2014

fishwhistle said:
green,when is the 750 de supposed to have availibility again?

Wont be available again until ATLEAST late August! BUT in all honesty it's going to be hard for Gavita to catch up to inventory demands, these 750's are HOT.

toquer said:
green, did mine ship today?

Should ship tomorrow Amigo, shipping department isn't in on the weekends, I'll check on it..

GAVITA

GAVITA

GR33NL3AF

GR33NL3AF

dumpstergrower

Kendo

Kendo

dumpstergrower

GR33NL3AF

Kendo

waayne

Scone_of_Ark

Kendo

GR33NL3AF

fishwhistle

Texas Kid

Some guy with a light

Kendo

toquer

GR33NL3AF

fishwhistle

toquer

GR33NL3AF

Privacy & Transparency

Privacy & Transparency