BearWater
Supporter
- 1,369
- 263
hahahaha! You’re too kind (and optimistic in my “computing abilities”)Def call Xfinity, I have thier gateway Xfi router/modem and connect up. There is a way I believe (if you turn off your gateway), then try to open up the app and it will take you to a page with the router IP info (at least this is how I used to do it, havent had to with new gateway). You can adjust channel that way (probably what you did anyways)
That's all I could think of, or contact AC infinity, they're supposed to be good at customer communication
I also don’t increase my RH even early seedlings get an average 50%, clones get a dome until I see root nubs on all the stems then it’s removed from them too I just keep my lights high, power low (200-250ppfdat the tops) and temps 70-80 basically right on point with you @Oldchucky I’ve given up on the humidifiers I know once I hit 1 gallon pots that issue is over and I’ll be pulling the RH down.I don’t think the room I start my seedlings in has ever been over 50% Rh! I just try and keep it in the 70s temp wise and slam the light to them. Seems to work OK! You’re looking good. Make sure you let them dry back good.
This is the perfect place to rant! It’s all welcome! Good experiences and information! Thanks for sharing!I also don’t increase my RH even early seedlings get an average 50%, clones get a dome until I see root nubs on all the stems then it’s removed from them too I just keep my lights high, power low (200-250ppfdat the tops) and temps 70-80 basically right on point with you @Oldchucky I’ve given up on the humidifiers I know once I hit 1 gallon pots that issue is over and I’ll be pulling the RH down.
I actually just posted pics a month ago or so of what the edges of my leaves look likenice the RH drops
It’s basically like a watering timer for me, if my tent RH is averaging 47-50 I know my plants have enough water, once the RH drops to 45 or lower I start lifting pots usually the day it drops below 45 they have another 24 hours before the pots get light enough to water. After that 24 hours I know I’m fully dried back and to boot the plant tells me the RH is low
I took these pics as an example last month
If the edges return to normal after watering and RH coming back up most likely you have a separate issue (most commonly I’ve heard root zone issues) but if they flatten right back out, Low RH is the culprit
Maybe a bit unorthodox for some but it works for me
Sorry for the rant, just giving my input and my reasoning
UPDATE ON WI-FI: my wife really hates me now but got it all straightened out! What a lovely smart lady she is! Again, I know just enough to fuck shit up or spend money on stuff I really didn’t need because I thought I did
No she doesn’t : ) but loves when I do! Hahaha.Does your wife smoke? Sorry, can't remember, lol!
You can download the photone app, switch to dli reading, enter in for 24hrs of light and it will give you a reading. You can take thst to any dli chart you want and start from there, then just read the plants.Hey all. So I went back to 24hour light cycle due to heat loss. I do have a heater but it sketches me out to use it. Im looking into an oil type heater instead. But until then lights are on and the temp is 76-75f. At what point will I start stressing the plants out with that much light? (How much longer do I have?)
Thanks 2Water!You can download the photone app, switch to dli reading, enter in for 24hrs of light and it will give you a reading. You can take thst to any dli chart you want and start from there, then just read the plants.
Why did you need the rubber boot? Is it a reducing fitting because the fan and filter are different size? Is it an AC Infinity filter? Just wondering because my AC Infinity filter fit directly on my AC Infinity fan without needing the rubber boot.I was able to use this weekend to finish a little more on the room ( taping seams) and the rubber grommet thing for the exhaust/charcoal filter came today so the filter is now on the fan. View attachment 2123587
I honestly dont remember the actual reason! This doesnt make sense now that I think about it ( I wanted a “quick connect for filter cleanings and replacements”) and also i think it was because my tolerances were too small and the fan was like 1/2’ off from lining up? But the fan and filter are the same size per all the recommendations I received here. Oh and it made it a little quieter… maybe hahaha. It made sense when i was high as shit out there working on itWhy did you need the rubber boot?
I was just asking, I know they sell them for a reason and lots of people use them.I honestly dont remember the actual reason! This doesnt make sense now that I think about it ( I wanted a “quick connect for filter cleanings and replacements”) and also i think it was because my tolerances were too small and the fan was like 1/2’ off from lining up? But the fan and filter are the same size per all the recommendations I received here. Oh and it made it a little quieter… maybe hahaha. It made sense when i was high as shit out there working on itSorry that was such a jumbled mess of a response.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?