thats why people pay there reg bill... and jump the meter run to a 200 amp panel with a cut off switch right before it .......not as cheap here we about 12$ a day for 2 x 600ws its alg though
As long as your not grounded and your not trying to hook up something that has load on it your good to go. Always remember though when In doubt lift the opposite foot off the ground ( if you're touching with your right hand lift your left leg ) that prevents a short circuit across your heart and goes straight down your leg, still a zap but you'll live through it if you do get tagged bad.thats why people pay there reg bill... and jump the meter run to a 200 amp panel with a cut off switch right before it .......
Not that I would ever have the balls to hook 1 up but I have been told what's up ....... Lmafo
Yeah used to be way easier too nowadays have to cut into live wire in most placesthats why people pay there reg bill... and jump the meter run to a 200 amp panel with a cut off switch right before it .......
Not that I would ever have the balls to hook 1 up but I have been told what's up ....... Lmafo
0.059 per kwh? That's less than 1/3 my costs for electricity. I'm at 0.15 + 15% tax per kwh So ya you have a great price. My 1000w flower + my 200w veg + fans = $100.00 / monthIm pulling about 45kw at my grow and using online calculator ill run about 1200-1500 per month in electricity. At .059 per kwh. Guess thats pretty decent price.
Im in a light industrial zone is why so low. My lease is 2700 so it makes up for it0.059 per kwh? That's less than 1/3 my costs for electricity. I'm at 0.15 + 15% tax per kwh So ya you have a great price. My 1000w flower + my 200w veg + fans = $100.00 / month
Do you recommend these there priced lower than ones I’ve seen at Hydro shopsPost any questions for electrical advice here.
hb
I'm new to this but @MIMedGrower can point you in the right direction. Blessings my bud hope all goes well.Do you recommend these there priced lower than ones I’ve seen at Hydro shops
And do you have a link on construction of a grid where I can lower and raise lights at once I’m gonna have 20 lights in my space View attachment 921343
I'm new to this but @MIMedGrower can point you in the right direction. Blessings my bud hope all goes well.
I'm sorry bud .I just figured since you are so knowledgeable that you might know that was a reputable brand.Sorry i dont know about that stuff.
Thanks guys I’m really struggling with this decision I want to go CMH to reduce heat my budget is not that great I believe the fixture are all the same plug in a good bulb and boom it’s onI'm sorry bud .I just figured since you are so knowledgeable that you might know that was a reputable brand.
Yeah used to be way easier too nowadays have to cut into live wire in most places
Can you run a 4 x 4 tent with led lights fan filter , small fan , ect on a 15 amp breakerPost any questions for electrical advice here.
hb
Can you run a 4 x 4 tent with led lights fan filter , small fan , ect on a 15 amp breaker
Just to add on to this; know your circuits. There may be other items on it you're plugging into (hallway lights, tv, bathroom, microwave!, etc). You need to add up all the amps of items on the circuit before proceeding to ensure safety. You may need to reconfigure electrical loads on a couple circuits.Can you run a 4 x 4 tent with led lights fan filter , small fan , ect on a 15 amp breaker
I was going run new breakers to them so I would that the only thing on it.Just to add on to this; know your circuits. There may be other items on it you're plugging into (hallway lights, tv, bathroom, microwave!, etc). You need to add up all the amps of items on the circuit before proceeding to ensure safety. You may need to reconfigure electrical loads on a couple circuits.
How do you check? Flip breakers on/off at the panel and then test which receptacles are live. If they are already tagged, confirm them. Be safe.
15 amps ballpark 1500 watts max. fans are low watt so is the led stay below 1500 w alls good go above you could trip breakers or heat up the wires. If you have space in the panel and are considering up grading you could pull a 3 wire and run 2 -15 amp circuits.I was going run new breakers to them so I would that the only thing on it.
I think that's I well do .15 amps ballpark 1500 watts max. fans are low watt so is the led stay below 1500 w alls good go above you could trip breakers or heat up the wires. If you have space in the panel and are considering up grading you could pull a 3 wire and run 2 -15 amp circuits.
I was going run new breakers to them so I would that the only thing on it.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?