G13 Haze | Feminized Cannabis Marijuana Seeds | SeedsMafia™
G13 Haze Feminized is one of the most potent and intense cannabis varieties. It is a collectible strain for connoisseurs. Order yours today.seedsmafia.com
Found 1 here
Go for this 1?
Sex: Feminized Indoor, Outdoor, Greenhouse Height: ≈ 50 - 100 cm Yield: ≈ 500 - 600 gr m2 Flowering time: 8 - 9 weeks Complete life cycle: October Cannabis Genetics: G13 x Hawaiian THC: 25% Type: Sativa 20%, Indica 80%
80% Indica ~ 20% Sativa is wrong....When i search on this strain on google, all places say 80% sativa /20% indica. Is it a misstype on their website?
You want to dry and cure your cannabis in the dark.Can i dry my cannabis in my grow tent while i run another grow with light and vent on?
As i will have 2 different strains growing, this wil probably be needed.
No, when drying you need dark, and as close to 60°F and 60% relative humidity as possible!Can i dry my cannabis in my grow tent while i run another grow with light and vent on?
As i will have 2 different strains growing, this wil probably be needed.
Seedmafia answered me, said it was their type at that the info was correct80% Indica ~ 20% Sativa is wrong....
80% Sativa ~ 20% Indica is correct...
Il prob hang them up dark outside the tent, with some ona to cover som smell from neighbour shedYou want to dry and cure your cannabis in the dark.
The drying process is more critical than the grow. Because you can really mess it up if you dry too fast or too hot then you have garbage. Be very careful 60-60 is a good starting point. I know I can't dry my outdoor in my tentIl prob hang them up dark outside the tent, with some ona to cover som smell from neighbour shed
60 fahrenheit and 60 humid?The drying process is more critical than the grow. Because you can really mess it up if you dry too fast or too hot then you have garbage. Be very careful 60-60 is a good starting point. I know I can't dry my outdoor in my tentI use the garage with a humidifier and a fan. They're usually done in 14days unless I have a lot then 18 or so.
If you get another tent to dry in yes you need a extract inline fan.I could dry outside tent in the shed. But it would stink alot, so might get an extra tent to dry in. Would i need a fan there?
Might aswell run a motherplant setup then, and move motherplant into growtent along with clones when its time to dryIf you get another tent to dry in yes you need a extract inline fan.
here a good article you can have a look about drying and curing:60 fahrenheit and 60 humid?
I use a 12 v fan I pulled out of an old Xbox / computer fan. hooked up to a 12 V adapter, I duct tape it in the exhaust port on top of the tent with just passive air intake with a small 6"fan on low moving the air in the tent...not blowing on the hanging buds/ plants.If you get another tent to dry in yes you need a extract inline fan.
If i wsnt the tent to eork for growing aswell as drying i might just go with proper fan and filter?I use a 12 v fan I pulled out of an old Xbox / computer fan. hooked up to a 12 V adapter, I duct tape it in the exhaust port on top of the tent with just passive air intake with a small 6"fan on low moving the air in the tent...not blowing on the hanging buds/ plants.
I'm able to find fans and adapters/ transformers at thrift stores. One in Canada I use Value Village a walmart sized store fill with odds and ends, hundreds of adapters and electrical components, timers & stuff..... all under $5
yeah another 125mm hole bottom of the tent as passive intake, with a small grid preferablyIf i wsnt the tent to eork for growing aswell as drying i might just go with proper fan and filter?
Also my growtent i had to cut the holes myself snd sttatch flanges.. Was ok but abit hazzle.. Anyways fornow i got a 125mm hole for extractor fan with coal filter,, and a small hole for cablle inntake... Is thst enogh passive air? Or shud i cut another 125mm hole at bottom of tent for extra passive air?
If you are sucking air out at the top you need air in at the bottom. I use passive air in the cold months but I shut them down and use input air from a cooler section of our house when its hot. You need to exchange the air without disturbing your temp and humidity too much. in winter its a slow exchange in the summer fastIf i wsnt the tent to eork for growing aswell as drying i might just go with proper fan and filter?
Also my growtent i had to cut the holes myself snd sttatch flanges.. Was ok but abit hazzle.. Anyways fornow i got a 125mm hole for extractor fan with coal filter,, and a small hole for cablle inntake... Is thst enogh passive air? Or shud i cut another 125mm hole at bottom of tent for extra passive air?
Will i still have no prob getting negative pressure even if i make a 125 mm hole for passive air?If you are sucking air out at the top you need air in at the bottom. I use passive air in the cold months but I shut them down and use input air from a cooler section of our house when its hot. You need to exchange the air without disturbing your temp and humidity too much. in winter its a slow exchange in the summer fast
I can't quite image 125mm...my 3x3 has 2 - 5"x15" vents & my 5x5 has 2 5" x18" vents with velcro flaps I can add or remove on both I don't think 125mm is close to that, You may need air coming in on all sides if you use smaller ports.Will i still have no prob getting negative pressure even if i make a 125 mm hole for passive air?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?