Lordly
- 154
- 43
Which is a better light source we can debate in another Forum sometime perhaps, however if I were you I'd put the 250 halide back, to see if that stops the issue before I start changing anything else, and you might want to do a slurry test just to be safe, and make sure to post your results if you have any questions, good luck!
Take a slurry test so we can rule out an issue in the root zone, post both results (pH & ppm)led hanging height is 60cm,i cant take pics right now but ill do later,i already sold mh setup so i cant hang it back,now even third plant started yellowing and drooping... i sprayed leaves yesterday at night with calimagic water,but deficiency didnt stop,im 99% sure problem is that i changed the light,i just want to know what i have to do?
X2^^^^This
What you're describing sounds light you may have the LED too close at the moment. What height? Pics?
Cheers
Coco is completely different than soil so things are starting to make sense , with out the ppm meter , don’t assume ! Easy to get salt build up and loc out , did you wash the coco before use ? What soil ya got?one plant is in coco/perlite,2 other plants are in soil/perlite, runoff ph is 6.7 (plants in soil),i dont have ppm meter but i was doing extra runoff every second watering,so i think ppm shouldnt be a problem,i flushed one plant which is in coco/perlite yesterday with phed water+flora kleen,the plant in coco has much more deficiency on leaves than other 2 in soil.
i used flora trio+diamond nectar's schedule at full power,after i changed my light everything started getting worse and worse,i stopped using any nutes and used only dechlorinated tap water,yesterday i flushed plant which is in coco,im waiting for results. i didnt flush other 2 plants which are in soil. i didnt wash coco,they said it is already washed,and my soil is from local store with organic fertilizerCoco is completely different than soil so things are starting to make sense , with out the ppm meter , don’t assume ! Easy to get salt build up and loc out , did you wash the coco before use ? What soil ya got?
The light may have triggered your problem but I suspect it’s a deeper issue?
What’s the feed schedule for your coco plant?
Flora Trio by itself at full strength is strong, haven't used it in a few years but I believe it's around 1,000 - 1100 PPM before your tap water's added ini used flora trio+diamond nectar's schedule at full power,after i changed my light everything started getting worse and worse,i stopped using any nutes and used only dechlorinated tap water,yesterday i flushed plant which is in coco,im waiting for results. i didnt flush other 2 plants which are in soil. i didnt wash coco,they said it is already washed,and my soil is from local store with organic fertilizer
so if ppm is a problem,the only way is to flush medium,right? and how long i have to wait before i see any changes after flush? because i flashed one plant alreadyFlora Trio by itself at full strength is strong, haven't used it in a few years but I believe it's around 1,000 - 1100 PPM before your tap water's added in
& I'm not sure how much more ppm you're adding to it with the second product but I think it's going to be a very high ppm !!
I agree with @Moshman I would get a ppm meter
Whereas you've got two different mediums involved, both showing the same issue to some extent it's difficult without knowing more information, but pictures might help?
Well I don't know if it's a problem? But I strongly recommend as Mr Mosh said getting a PPM meter and checking it out because I used GH Flora for several years and the ppm numbers I've quoted you are about right, good luck!so if ppm is a problem,the only way is to flush medium,right? and how long i have to wait before i see any changes after flush? because i flashed one plant already
Well I don't know if it's a problem? But I strongly recommend as Mr Mosh said getting a PPM meter and checking it out because I used GH Flora for several years and the ppm numbers I've quoted you are about right, good luck!
Well I don't know if it's a problem? But I strongly recommend as Mr Mosh said getting a PPM meter and checking it out because I used GH Flora for several years and the ppm numbers I've quoted you are about right, good luck!
okay i ordered DTS meter,it is the same as ppm meter right? it will be delivered on monday,hope plants wont die in 2 days...We don’t know if ppm is a problem ? You have no way to check it? Assuming you “flushed” it out just doesn’t work sorry been there tried that.
Let’s say your run off was 7.3 ph and 1400 ppm that’s an issue but you could also have
7.3 with 200 ppm
5.2 with 1400 ppm
Ect ... so without all the info you are just guessing at best, play the lottery prolly better odds
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?