mark360jones
- 102
- 28
So life started for my single seed in February. I grew the girl ( its a girl, was sold as a feminised seed) for about 10 weeks and the took cutting from her. Ended up taking around 30 clones which stripped her completely and putting them into my aeroponic propagator. I nearly failed miserably when I last used the aeroponic propagator but I got the girls to the end eventually with what look like v good results (liberty haze and masterblend thread).
Anyway after some more research i changed how I used the prop and had the mister come on every 15min for 15mins using plain tap water, silver bullets, sumo katana roots in the small rez at ph 5.9, pants were also dipped unto clonex . Out of the 30 clones taken 28 survived and started to show the roots (couldn't believe the success after the first time). 9 (8 for the room and 1 for a new mother) of the best looking clones was chosen and the rez was emptied and then fresh water added with an early veg mix of the masterblend nutrients
0.30g per litre masterblend
0.15g per litre mag sulfate (Epsomsalt)
0.30g per liter calcium nitrate
0.2ml per liter sumo katana roots
solution was then set at ph 6.0
the plants responded extremely well to this and the growth was great also the roots got massive and started intertwining with each other.
With the main room cleaned it was time to put them into there final pot this consisted of a 13l airpot and a 60/40 coco perlite mix and the roots sprinkled with great white myco, the main rez is filled with plain water and ecothrive neutralise is added to get rid of the chloramine/chlorine out (this is only added so the myco has chance to work), next sumo silicon is added and the ph adjusted to 7. Then the late veg mix is added
0.5g per litre masterblend
0.25 per magnesium sulfate
0.5g per litre calcium nitrate
Ph is then further adjusted to ph 6.2, plant have had this solution for 3 feed in the 1st 24 hours which are shown in the pics
Room 2.6x1.4
Lights 4x mars sp3000 running at 25%
Extraction run on ecotechnics fan speed controller 6inch inlet 8inch outlet
Temp 26
RH is 65
Anyway after some more research i changed how I used the prop and had the mister come on every 15min for 15mins using plain tap water, silver bullets, sumo katana roots in the small rez at ph 5.9, pants were also dipped unto clonex . Out of the 30 clones taken 28 survived and started to show the roots (couldn't believe the success after the first time). 9 (8 for the room and 1 for a new mother) of the best looking clones was chosen and the rez was emptied and then fresh water added with an early veg mix of the masterblend nutrients
0.30g per litre masterblend
0.15g per litre mag sulfate (Epsomsalt)
0.30g per liter calcium nitrate
0.2ml per liter sumo katana roots
solution was then set at ph 6.0
the plants responded extremely well to this and the growth was great also the roots got massive and started intertwining with each other.
With the main room cleaned it was time to put them into there final pot this consisted of a 13l airpot and a 60/40 coco perlite mix and the roots sprinkled with great white myco, the main rez is filled with plain water and ecothrive neutralise is added to get rid of the chloramine/chlorine out (this is only added so the myco has chance to work), next sumo silicon is added and the ph adjusted to 7. Then the late veg mix is added
0.5g per litre masterblend
0.25 per magnesium sulfate
0.5g per litre calcium nitrate
Ph is then further adjusted to ph 6.2, plant have had this solution for 3 feed in the 1st 24 hours which are shown in the pics
Room 2.6x1.4
Lights 4x mars sp3000 running at 25%
Extraction run on ecotechnics fan speed controller 6inch inlet 8inch outlet
Temp 26
RH is 65