Mars Hydro LED

[Timbo0716]

haha, Yea we can fry his ass up and throw some hot sauce on him. Yea our roads suck, and yea oh the women.hhahaha. I got family in Houston area, all the folk are real nice and friendly. We love to go up their and cook up a festival worth of food and drink. Let the good times roll!!!

 

[oldskol4evr]

Sounds like something is out of wack for an LED to burn hotter than HPS. The relatively few Far Red diodes in those lights should make very little difference, but Emmie will know for sure.

no bro just a comparision i was trying to explain,i look at those charts and i always see that when the claim of less heat is there ,the red side always has a spike at some point,thats what i was getting at,they say cool on a light and it has the sudden spike if you dig what i mean ,i cant discribe most thing i say,just when somone comes on and comments what im thinking,i got a few wounds that mix me around,so thinking is spur of moment shit

 

[Timbo0716]

I was using 2 Bestva600w with veg and bloom switches. I found it ran warm also with just the blue veg lights on. They vegged great with both switches on, but now they really are loving the wattage from the TS3000 I have over them now.

 

[oldskol4evr]

haha, Yea we can fry his ass up and throw some hot sauce on him. Yea our roads suck, and yea oh the women.hhahaha. I got family in Houston area, all the folk are real nice and friendly. We love to go up their and cook up a festival worth of food and drink. Let the good times roll!!!

excuse my languagre ,but f**K that black hole in the earth worse damn place i lived in 59 years ,i lived further up north off 45 for years and all specialist are in houston ,the woodlands was as far as i would go ,the beaches i discribed surfside down in galveston,just dont go there friend,and damn sure dont take your kids near it,corpus cristy is getting just as bad,you might see the smile the folk give you in houston but dont let your guard down bro just saying,swamp rules do apply there under cover if you dig

 

[Buzzer777]

i only cut my beard when i cant get the soap out and start to itch,she will run a razor threw my massive amount of hair on head about every 2 month ,head be looking like my canopy growth in the tent ,be like a few plants 2 ft tall here and a few 3 to 3 1/2 ft tall,like alfalfa on the little rascals hahahah the landing zone doesnt ever need clipped on the back of head might need some salt on icy days though ya,then she will brag saying damn baby you have enough hair to fill the lid of a coke bottle this time,old bitch hahahah

Mine is short and trimmed daily, since I sneeze alot....LOL

 

[Timbo0716]

I can dig that, and thanks for the info brother. We never let our guard down, I know exactly where your coming from. Always undercover. I keep a good eye on their sleezy smile, hahaaha I got on of my own. Sorry to hear about your issues with remembering, but we get the point your talking about.

 

[MIMedGrower]

i realize it,but im talking about stealth to the sides of the tent,with no heat at all,less but powerful lights to adapt to any sitiution and easy,it a bitch to move lights around with a scrog and such,im the worlds worse at just letting my plants go buck wild,hardly ever do any training,i focus on a little to keep them from getting to the light,but im talkng a little bondage before the flip and hold um down to stretch ends then release there ass,so you have fans having them girls lovely hips a swanging in there there goinna hit the lights,these powerful lights are gonna bleach um,you get what i mean,if i was younger i have to complete solution,but aint giving up a life of R&D if it isnt gonna put food in my family mouth after im gone if you dig

Get drivers with the dimmer knob. Then you can use any lamp anywhere.

 

[basscaptain]

Get drivers with the dimmer knob. Then you can use any lamp anywhere.

that's what I have been looking for...... I can run them full but that's NOT what I'm looking to do here..... I have this all in my head now... so I'm f.cked

 

[Buzzer777]

that's what I have been looking for...... I can run them full but that's NOT what I'm looking to do here..... I have this all in my head now... so I'm f.cked

Not sure, but a PWM might work on those strips (Pulse Wave Modulation..as in speed controller for a motor). I have a few setup where the dimmer on the driver is internal and sux. PWM is the thing on top behind the meter:)
Why would you ever dim them, unless I mis-understood?

 

[basscaptain]

the $ 6,00 -15.00 driver will work, BUT I was hoping to find a driver with a dimmer for a few$$$ ha ha ha

 

[oldskol4evr]

that's what I have been looking for...... I can run them full but that's NOT what I'm looking to do here..... I have this all in my head now... so I'm f.cked

no you aint your a gardener and know what you want,i asked yesterday if you were gonna run red lights in veg,i dont,you need a timer and want to switch it on when you like for a certain amount of time,i do the same with the t5ho and uvb bulb,them bitchs will fry your shit and a timer would flip it on say every 2 hours for about 30 min,i cant do it now,that 16 bulb i tore apart had 3 switchs and one was just for them 2 bulbs,so cant do it any more

 

[Buzzer777]

no you aint your a gardener and know what you want,i asked yesterday if you were gonna run red lights in veg,i dont,you need a timer and want to switch it on when you like for a certain amount of time,i do the same with the t5ho and uvb bulb,them bitchs will fry your shit and a timer would flip it on say every 2 hours for about 30 min,i cant do it now,that 16 bulb i tore apart had 3 switchs and one was just for them 2 bulbs,so cant do it any more

Far Red supplemental light should not be needed in veg imo.

 

[oldskol4evr]

Far Red supplemental light should not be needed in veg imo.

^^^ that is why i took them blurple lights out,in veg they be liking blue light,i do plan on putting them back in for side lighting when these temps kinda regulate in flower,no ac or heat and they will do that for me when it gets cold

 

[Buzzer777]

^^^ that is why i took them blurple lights out,in veg they be liking blue light,i do plan on putting them back in for side lighting when these temps kinda regulate in flower,no ac or heat and they will do that for me when it gets cold

Hold on there....
Most burples do not go to 660 nm with only the veg side on (far red). That's one reason NOT to flip the bloom switch until you flower.

 

[Timbo0716]

Yes they will help in the cold days, I may have to find a way to do the same here. May do a little wood work to build a little stand on each side for them.

 

[oldskol4evr]

Yes they will help in the cold days, I may have to find a way to do the same here. May do a little wood work to build a little stand on each side for them.

im outlaw and have no choice but to get ninja mood,i run in a utility room with no heat or ac,when it gets hot nothing but forced wind and just take what i can get if you dig

 

[Timbo0716]

Haha, I dig it. I was in the same kinda bunker growing in my outside kitchen and laundry area. no ac or heat. now going to rely on the heat in my home and some fans. I have a good setup in the closet with an exhaust fan and filter. helps regulate the temps to.

 

[oldskol4evr]

Haha, I dig it. I was in the same kinda bunker growing in my outside kitchen and laundry area. no ac or heat. now going to rely on the heat in my home and some fans. I have a good setup in the closet with an exhaust fan and filter. helps regulate the temps to.

i run mine with intake fan filter combo and same for exhaust,the tent will suck in ,so a controler even things out

 

[Timbo0716]

I gotcha, the things we have to do. I need to do some lst on these girls soon, waiting for my wife to bring home some of those paper clips they use at their office. I use them on my smart pots so I don't have to cut holes in them to perform lst. works really nice.

 

[oldskol4evr]

I gotcha, the things we have to do. I need to do some lst on these girls soon, waiting for my wife to bring home some of those paper clips they use at their office. I use them on my smart pots so I don't have to cut holes in them to perform lst. works really nice.

i put zip ties around the first ridge on my pots,and then just use bread ties to tie um down,after stretch is over take them all off