PipeCarver
Supporter
- 5,643
- 313
I saw him at Swaneset in Pit Meadow's ,,,He came in by chopper,played like there was no one in front of him, he'd approach his ball line it up drop his cigarette on the ground and whack the fk out of it and move on...It was a celebrity event 1 round as fast as possible jump in the chopper and bolt.....I think we were all there just to watch him whack the fk out of the ball....He didn't have much rapport with the crowd just a quick cash grab while he could I guess....I think it's still this guyView attachment 1206607
That’s hilarious!!!I saw him at Swaneset in Pit Meadow's ,,,He came in by chopper,played like there was no one in front of him, he'd approach his ball line it up drop his cigarette on the ground and whack the fk out of it and move on...It was a celebrity event 1 round as fast as possible jump in the chopper and bolt.....I think we were all there just to watch him whack the fk out of the ball....He didn't have much rapport with the crowd just a quick cash grab while he could I guess....
I got drunk as fk stole a marshals cart to get back to our car, flung my wife out of it by taking a quick turn didn't notice until I got to the car and where's my wife...I look back and she was just getting up, she thinks she got knocked out for a moment she still doesn't remember flying out of the cart....lol.....Booze....
I purchased dimmers from rapid led... all of them except 1 have taken a big shit on my plantsThose 3 were test plants to see males from fems, they were not very healthy but I just let them ride...I got 2 good clones off them but I fried the clones off their clones...I just stuck them under the Se3000 and WTF the dimmer doesn't work now....reliability issues...The switch nor the turn nob do anything....I have it on 100% cause that's all its got,,,
Ya , I know it seems like something if off but the heater was old and an element burned out...I have had issues with wiring in this old house, they didn't use code and white is sometimes the hot at switches but it shows 120 v and the polarity is right. I'll fiddle with it today..I'm in my shop now blowing a couple of j's before I get at it.Have you checked voltage at your receptacles? Sounds like you had a string of electric problems.... could be a problem at the pole.
Ya , I know it seems like something if off but the heater was old and an element burned out...I have had issues with wiring in this old house, they didn't use code and white is sometimes the hot at switches but it shows 120 v and the polarity is right. I'll fiddle with it today..I'm in my shop now blowing a couple of j's before I get at it.
[/QUOTE
Hey you still in your shop thinking dude!
Turn it on in the dark!!! I have one very similar and the plastic is so then that the power light glows through the plastic. I had to wrap it in foilA bit early for me...I'm more of a 9am riser...I'll be down there in a bit....Gotta go out today for a heater..66f in there at lights out...Homedepot has a oil filled 1500w one for$69....+ $20 gas to get there and back....I'll have to rearrange a couple of circuits in my panel to take the load in that side of my basement...I have 1 circuit that the dishwasher was on all by itself I can use.....the dishwasher is no more.....more work to do todayView attachment 1207108
Yep, all my power strips and oil heater and steamer have those red power-on lights. I cover them with good ol electric tape.Turn it on in the dark!!! I have one very similar and the plastic is so then that the power light glows through the plastic. I had to wrap it in foil
Even desktop Vapes have them some are bright blue now electric tape in the tooth box next to the duck tape and hammer.Yep, all my power strips and oil heater and steamer have those red power-on lights. I cover them with good ol electric tape.
I bought that heater and it has my room to 81f..but 30% humidity with my large humidifier on full blast. I added another vaporizer it just puts out big chunks of moisture I have it in front of a fan so it dissipates before landing on my plants.. it's now up to 44% I have the heater timed for just the on time for my light The house will keep them warm until then . I had to bump up our house temps to keep them in the high 60's Even at 72f house temp it was only 68f with lights on...I put the 1000w hps on for its heat to lift it to 74f while we we're out getting the heater.Even desktop Vapes have them some are bright blue now electric tape in the tooth box next to the duck tape and hammer.
The humity is a pain at times but grab a 30 to 50 pint depending ur sq footageI bought that heater and it has my room to 81f..but 30% humidity with my large humidifier on full blast. I added another vaporizer it just puts out big chunks of moisture I have it in front of a fan so it dissipates before landing on my plants.. it's now up to 44% I have the heater timed for just the on time for my light The house will keep them warm until then . I had to bump up our house temps to keep them in the high 60's Even at 72f house temp it was only 68f with lights on...I put the 1000w hps on for its heat to lift it to 74f while we we're out getting the heater.
But if u got it at 44 u good that good for flowering too just bring temp little downI bought that heater and it has my room to 81f..but 30% humidity with my large humidifier on full blast. I added another vaporizer it just puts out big chunks of moisture I have it in front of a fan so it dissipates before landing on my plants.. it's now up to 44% I have the heater timed for just the on time for my light The house will keep them warm until then . I had to bump up our house temps to keep them in the high 60's Even at 72f house temp it was only 68f with lights on...I put the 1000w hps on for its heat to lift it to 74f while we we're out getting the heater.
Hi, ya I'll check leaf temp today, I was just happy to see the temp up... I've some more rearranging to do...The light is still on at 100% the rep just contacted me and suggested I push a reset button on the back of the driver...So I have to take it apart to do that...work work work.....But if u got it at 44 u good that good for flowering too just bring temp little down
Duct tape,3 layers to cover the indicator lights...those fkin little led's are bright....With the vaporizer I added it has a glow in the dark label on it..I covered it up with tape and I could still see the light from it ...it also took 3 layers of tape....Turn it on in the dark!!! I have one very similar and the plastic is so then that the power light glows through the plastic. I had to wrap it in foil
The old invisible reset button only the builder knows where it is yes I know them well!Hi, ya I'll check leaf temp today, I was just happy to see the temp up... I've some more rearranging to do...The light is still on at 100% the rep just contacted me and suggested I push a reset button on the back of the driver...So I have to take it apart to do that...work work work.....
ya, It looks like I'd attached the driver to the wall too tightly.....as soon as I loosened the 2 screws I had used to hold the driver and dimmer to the wall the light went out...I turned the switch on and the light came on and the dimmer now works as it should.........A bit sensitive to this type of fault...It must have depressed the button to disengage the dimmer...?????? odd It wasn't that tight. I mean I didn't screw it to the mounting board too tight I thought...Just tight enough to hold it on...BUT....too tight..it apears .I now have it at 37-39,000 lux I l'll see how that doesThe old invisible reset button only the builder knows where it is yes I know them well!
Like a back door in a computer program only the programmer knows.
ya, It looks like I'd attached the driver to the wall too tightly.....as soon as I loosened the 2 screws I had used to hold the driver and dimmer to the wall the light went out...I turned the switch on and the light came on and the dimmer now works as it should.........A bit sensitive to this type of fault...It must have depressed the button to disengage the dimmer...?????? odd It wasn't that tight. I mean I didn't screw it to the mounting board too tight I thought...Just tight enough to hold it on...BUT....too tight..it apears .I now have it at 37-39,000 lux I l'll see how that does
Jan 20....I've made the led space a bit warmer now.. The heater only does so much in a large space so I enclosed the space better, put a door on it and put feet on a panel to lift it 6". I may use some tarp and tent up the top to keep the heat down....Good to hear ya got it sorted out!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?