THCFarmer.com
121,135 Members Log In Register
Log In Register

Playin With Fire

  • Thread starter Thread starter G gnome
  • Start date Start date
  • Tagged users Tagged users None

Playin With Fire

G gnome 11,323 Replies 872,750 Views
Page 42 of 567 · Replies 821–840 of 11,324
Status
Not open for further replies.
#822
Hey @G gnome iv got a couple of s1 will made from your g13 cut going at the mo.theyr still in veg but theyr fuckin reeking and have been since they were small.does the cut itself stink like fuck even in veg,i dont recall.i,ll let you know how these ones go.they should be good quality.
 
#824
I’m brainstorming so maybe you guys can throw some ideas out.
My groom is 10x12x10. Insulated aluminum stud structure detached from my house.
After I chop this run I’m throwing drywall up and throwing a few more outlets in/painting and I’m thinking how to set up the intake/exhaust/cooling
I have (2) 12” can fan
(1) 6” can fan
12k btu standing ac unit.
Currently 2k digital se hps/mh.
Going to 2 de in near future

I want to utilize the 12” can fans but won’t it completely negate the ac?
Winter time I could do it without the ac but during the summer?
With those parameters what do you guys think?
 
#825
Thejoeybrown said:
I’m brainstorming so maybe you guys can throw some ideas out.
My groom is 10x12x10. Insulated aluminum stud structure detached from my house.
After I chop this run I’m throwing drywall up and throwing a few more outlets in/painting and I’m thinking how to set up the intake/exhaust/cooling
I have (2) 12” can fan
(1) 6” can fan
12k btu standing ac unit.
Currently 2k digital se hps/mh.
Going to 2 de in near future

I want to utilize the 12” can fans but won’t it completely negate the ac?
Winter time I could do it without the ac but during the summer?
With those parameters what do you guys think?
Click to expand...

I should add with 2k hps my actual grow Area is about 4x8 with walk-in room. In the future I will be adding a little more whether is the 2 gavitas or 3 digi ballasts so that has to come in to t too
 
#827
In my 10x10x8 I can keep temps under 80* with 2 8" exhaust duct fans and passive filtered intake. 1 fan on a timer the other is on a thermostat controler. My lung room stays around 68 - 74, in the winter I vent back into my house and in the summer I just vent outside. I hang 2 carbon filters in my flower and draw through them.
It was a game of trial and arer on my part and I got lucky, it works.
I don't know if this helped but that's what I got.
 
#828
stonestacker said:
In my 10x10x8 I can keep temps under 80* with 2 8" exhaust duct fans and passive filtered intake. 1 fan on a timer the other is on a thermostat controler. My lung room stays around 68 - 74, in the winter I vent back into my house and in the summer I just vent outside. I hang 2 carbon filters in my flower and draw through them.
It was a game of trial and arer on my part and I got lucky, it works.
I don't know if this helped but that's what I got.
Click to expand...
No definitely bro.
Shit ideally that’s what I’d like to acheive. With no ac that would be great. And I think I can acheive that with room to spare (for a little added light/heat) with 2 12”. Here’s the thing
On the back of my dwelling is a “shed” type area built with plywood and 2x4 built off the back of my groom. So one wall is the groom outside wall. That’s where all my stuff exhausts now...
Problem is it’s just wood outside right now. Do you think I could insulate it enough to make a lung room of sorts?
 
#829
Thejoeybrown said:
No definitely bro.
Shit ideally that’s what I’d like to acheive. With no ac that would be great. And I think I can acheive that with room to spare (for a little added light/heat) with 2 12”. Here’s the thing
On the back of my dwelling is a “shed” type area built with plywood and 2x4 built off the back of my groom. So one wall is the groom outside wall. That’s where all my stuff exhausts now...
Problem is it’s just wood outside right now. Do you think I could insulate it enough to make a lung room of sorts?
Click to expand...
I could use the 2 12” fan as exhaust in 2 top corners (with duct) exhausted out to the attached shed. For that to be permanent tho I would need to insulate and stabilize the temp of that area.
My thing is that makes my AC moot no? If say I needed it I would need to close off the fans so they don’t exhaust all the cold air out right?
 
#830
stonestacker said:
In my 10x10x8 I can keep temps under 80* with 2 8" exhaust duct fans and passive filtered intake. 1 fan on a timer the other is on a thermostat controler. My lung room stays around 68 - 74, in the winter I vent back into my house and in the summer I just vent outside. I hang 2 carbon filters in my flower and draw through them.
It was a game of trial and arer on my part and I got lucky, it works.
I don't know if this helped but that's what I got.
Click to expand...
The thing I have going for me is I am in the bay are so I do not deal with extreme temps. At all. Lol. Maybe a week or so a year we get a major heat wave but other than that outside temps are mild as can be. Heat and cold wise
 
#831
Thejoeybrown said:
No definitely bro.
Shit ideally that’s what I’d like to acheive. With no ac that would be great. And I think I can acheive that with room to spare (for a little added light/heat) with 2 12”. Here’s the thing
On the back of my dwelling is a “shed” type area built with plywood and 2x4 built off the back of my groom. So one wall is the groom outside wall. That’s where all my stuff exhausts now...
Problem is it’s just wood outside right now. Do you think I could insulate it enough to make a lung room of sorts?
Click to expand...
Sure but do you need to insulate it?
So in the shed I would cut 2 12" holes down low mount a hepa filter and use that as passive intake. Mount 2 carbon filters on the ceiling, mount the fans in or outside of groom sucking hot air out of the room. Keeping in mind possible light leaks.
 
#832
stonestacker said:
Sure but do you need to insulate it?
So in the shed I would cut 2 12" holes down low mount a hepa filter and use that as passive intake. Mount 2 carbon filters on the ceiling, mount the fans in or outside of groom sucking hot air out of the room. Keeping in mind possible light leaks.
Click to expand...
Hmmm. I never thought of exhausting the lung room. It’s genius. Hahaha
 
#833
MW7945 said:
Holy shit, must be further north than I... no way I'd be standing on the ice yet. Unless you're damn close to shore. Hell, it was in the 60's here yesterday.
Click to expand...

Standing on ice? Shit i was riding my wheeler on it!!!

Mr Bee said:
Hey @G gnome iv got a couple of s1 will made from your g13 cut going at the mo.theyr still in veg but theyr fuckin reeking and have been since they were small.does the cut itself stink like fuck even in veg,i dont recall.i,ll let you know how these ones go.they should be good quality.
Click to expand...
Yeah man keep us posted on those. Put some pix up when u get a chance
 
#840
So. I should put this

I built it so for me to extend the width is a one day job.
Remove some self tappers. Run some track. Add a few studs, and put wall back up.
In the next year or so I want to extend by a few feet. That will be at a time that I install a mini split.

Until then....I could use the 12k portable but the more plants I add the more work it has to do and I have 2 12” can fan collecting dust.

And here we are. Hahah
 
Status
Not open for further replies.
Page 42 of 567 · Replies 821–840 of 11,324
Back
Top Bottom