Fineest 1000w it's at the ceiling... but I just checked for my mid day check up and I have roots everywhere.... I'm looking to transfer into 5gal dwc running emerald harvest 3 part series along with there calmag, I have general hydro armor si, great white, dyna-zyme enzyme cleaner and of course ph up and down..... I'm thinking its time to transfer and just keep my propagation dome over it.... I just sat down to figure out which order I would put these in my nutrients buck... any tips on all this?What light do you have and how close is it? Looks light its way to close.
Silica first mix well then add nutrients then ph down. Then you can add the rest.Fineest 1000w it's at the ceiling... but I just checked for my mid day check up and I have roots everywhere.... I'm looking to transfer into 5gal dwc running emerald harvest 3 part series along with there calmag, I have general hydro armor si, great white, dyna-zyme enzyme cleaner and of course ph up and down..... I'm thinking its time to transfer and just keep my propagation dome over it.... I just sat down to figure out which order I would put these in my nutrients buck... any tips on all this?
Looks like light burn to me too.Friend, autos are time oriented you are at 14 days, your very far behind, been running autos for 9 years there fussy, bitchy, easy to burn plants that you do not run like photos, if i were you i would raise my light it looks like your getting a little light burn, you want your leaves pointing to the light not shying away from it, i run 600w led and for seedlings that small i keep my light 28inc from seedling, when it gets bigger i lower my light to 24inc that seems to be my sweet spot, pic is crystal candy auto by sweet seeds at day 22, leaves are dropping beacuse it is about to go to bed they droop so they can strech during darkness , plant at 22 days is female and just hitting her spurt, if you need info or help no prob just ask.
That's a beautiful start there I wanted to launch this one and test my whole tent and lights and all... I'm going to order seeds soon.... but im going to keep working with what I got for nowFriend, autos are time oriented you are at 14 days, your very far behind, been running autos for 9 years there fussy, bitchy, easy to burn plants that you do not run like photos, if i were you i would raise my light it looks like your getting a little light burn, you want your leaves pointing to the light not shying away from it, i run 600w led and for seedlings that small i keep my light 28inc from seedling, when it gets bigger i lower my light to 24inc that seems to be my sweet spot, pic is crystal candy auto by sweet seeds at day 22, leaves are dropping beacuse it is about to go to bed they droop so they can strech during darkness , plant at 22 days is female and just hitting her spurt, if you need info or help no prob just ask.
I have roots popping out everywhere on it and about 2 inches underSilica first mix well then add nutrients then ph down. Then you can add the rest.
Wait until you see roots before transplant. You want about 70-80% RH for the next week. After you can drop it to 60-65% depending on temps.
Don't use a dome with seeds if you don't have to.
Then put 1-2" of hydroton on the bottom of the net pot and place the jiffy on top then fill the rest.air stone right below the net pot in the center and water level 1" below the net pot so that the bubbles breaking the surface just splash the bottom of the net pot.
Top feed from the res about 1cup every day or 2 until the roots hit the water.
Your ppm should be 200-300 after they go in which usually about 10-14 days from when first cloned or planted.
I could go on and on but I'll stop there if you have any questions just ask.
Then I would transplant as per my previous post.I have roots popping out everywhere on it and about 2 inches under
I'll start getting all of it together and I'll put a transfer pic tomorrowThen I would transplant as per my previous post.
He is in hydroponics. He has to transplant, you can't start bean in DWC.Im not telling you what to do, but transplanting an autoflower is a no no, they have very weak root systems and transplanting can shock an auto, you germanate your bean and put it directly into the pots you intend to do your whole grow in, as stated at the best of times autos are fussy, by transplanting your plants can get shocked and dwarf out, or they just might refuse to flower, i have seen it all, i just had a huge green poison plant that refused to flower for no good reason, plant was in great health, ph fine, i cut the light cycle to 12/12 for a week in hopes of jumpstaring the plant, nothing, then i put it in darkness for 3 days by this time the plant was 40 days old, to old to flower, thats what i ment when i said there fussy and bitchy, just paid $65 for 3 beans ive been growing 40 years first 2 beans would simply not germanate, the 3rd bean germanated in 24 hours and poped in 48 just like there supposed to, and this was methisto a really great breeder, toof decay was born today, 2 seeds bad 1 good and for no reason, autoflowers cost much more than photos and in my humble opinion autos are harder to grow than photos, beacuse there fussy little bitches.
Went with rapid rooter due to reading that rockwool causes high phJust a quick comment on rapid rooters. Used to use them religiously in a very high humidity enviro. Had almost 100% success. Moved to a place that is dry with low Humidity. Killed my first 2 domes of clones. Went to rockwool rooters after that. If you are dealing with a low humidity enviro might want to try a different rooter.
Went with rapid rooter due to reading that rockwool causes high ph
Run what I have for now and maybe next round i. Run ocan't comment on that with DWC buckets. Rooters arent an issue in a setup like that. 4in+ cubes can be and rot the bases of the stems from wicking water. Rockwool is like coco and likes to naturally be around 6. Ive used rockwool rooters in everything from hydoton to soil.
Maybe next round I'll run 2 of the same one in rr and one in rockwoolcan't comment on that with DWC buckets. Rooters arent an issue in a setup like that. 4in+ cubes can be and rot the bases of the stems from wicking water. Rockwool is like coco and likes to naturally be around 6. Ive used rockwool rooters in everything from hydoton to soil.
Run what I have for now and maybe next round i. Run o
Maybe next round I'll run 2 of the same one in rr and one in rockwool
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?