i be thinkin of C Columbus 1392 w/ur bill there
hey claudacio..
can you break down the pricing too? like how much for the hood, the cloner, the nutes and what they are sizewise, the HPS bulb, the ballast
fyi
i paid 350 bucks for my 430 watt HPS sunlight brand cast aluminum finned ballast,with 4inch aircooled hood,,,I paid around 300 for a microgarden, which was a 2 x 3 foot tray ona 25 gal res w/the 430 hps over it worked well
http://www.growannex.com/hydroponics/hydro-systems/turbo-garden-ebb-and-flow i forgot what bulbs cost,,maybe like sixty?..I paid 200 for a cheapo 1000 watt ballast with bulb fixture, ten flood cord, and another 135 for a nice sunlight brand hood , 6 inch air-cooled ( i have never used the air-cooled feature yet w/glass installed ), 135 for a ten inch diameter carbon filter I never used yet either, i do use an ionizer when needed w/great results...that was 220. btw,i paid 200 for a 4 x 4 foot tray with 40 gal res , thats 4 under the 1 K hps bulb and gives me around 65watts per sq ft on the tray
but i shared the info to hopefully encourage you to not give up n keep trying to grow un til it comes together for you, read up, watch peeps that seem to do better than others, run your groarea like a sterile ER operating room, clean, clean, clean, no cats n dogs checkin out the nuggs w/ya in there, only one should be you, unless u have someone that troubleshoots problems,and those you can overcome online w/your camera taking pics so peeps can diagnosis your plt issues or whatnot...it is a GREAT way to learn n grow with infinite wisdom & grow knowledge here online
some products work great, some are not needed, some are, and so on, growing should be a relaxing time verse stressing out on whatever your poison may be, I know mine all to well,
but the point is keep growing and you will hone that gro area into a higher producer than it is today as u fine tune it and get better at tweakin n adjustin, such as i went from the 430 watter to the 1000 watt bulb w/diff set-ups tweaking it as needed,,,if fact i will share a pic of the last tray i did ( awhile back now tho, sadly) ,, this had 23 plts in the 4 x 4 ft ebb n flo tray w/ 40 gal res,,, coco pebbles, canna hydro nutes, and gravity to finish, sucanat all during flower too.... after a few times you know how many teaspoons of ph down to get res to 5.8pH, how much mill to do res w/nutes, whcih order to do them in, best way to pump out OLD res solution ( i use a cheapo coiled 50ft. hose i run to my toilet and it is gone forever ), then i use it to run fresh cold water right back into res and all done till next time, EASY aint it?
oh, you need airflow in there too right? I have two oscillating fans goin 24/7 ,plus a strong 6 inch inline fan, 275 cfm's that can emtpy the area within a minute or so that goes on if it gets 77F degrees in there, i use the inline fan to exhausts the room which creates negative pressure and sucks the fresh air in from the fresh air intake inlet i made,
You are the GOD of your indoor eco system,,,if u dont want the tent, sell it, buy something u want for your resined up girls so their trichomes stand out at attention all ready to get amber and smoked up by you... so find a good strain and gro it and smoke it up and enjoy your fine medical herb
later
man n good luck w/manny bountiful harvests to you!!
oh, this pic, the tray has 730 grams around w/9 diff strains in there too! so one round n ur well above even cuz u can get 2 lbs w/ur setup there too