h4ppyf4rmer
- 863
- 143
What are you veging under at the moment? You've built lights to grow from seed to harvest so I really don't see where the problem is.
yeah, I actually could put them under these lights with a 18/6 cycle this time because I'm currently not using it, but my plan is to overlap my vegging(veg tent) with my blooming(bloom tent) so basically I'm eliminating the whole serial operation of vegging then blooming.
old way one tent:
|...veg...|..........Bloom..........|...Veg...|..........Bloom........|...
two tents:
|...veg...|.................|...Veg...|...............|...veg...|..............
|...........|..........Bloom..........|..........Bloom........|.........Bloom........|
I hope that makes sense };-)
and because Mass only allows 12 plants, I was planning on only six in veg and 6 in bloom at any one time.
I'm figuring I'm probably a couple weeks away from the bloom tent being operational, I need to complete the U-RDWC system(just need to hook up the res to the buckets), need to test for water leaks, need to get a couple of fans, need to get the exhaust in. I'm thinking a 6" but I'm not sure I want to spend the $150 on a vortex fanIm with @Toaster79 on using the new lights asap
I'm figuring I'm probably a couple weeks away from the bloom tent being operational, I need to complete the U-RDWC system(just need to hook up the res to the buckets), need to test for water leaks, need to get a couple of fans, need to get the exhaust in. I'm thinking a 6" but I'm not sure I want to spend the $150 on a vortex fan
right back atcha rockpilerguy. good to hear you are back home with the fam on this fine day buddy.Happy Father's Day sixstring
@sixstring Hey.. i had a question for you about some issues i am having with LEd's i got recently... care if i pm you
All hail the Les Claypool of LED's!! Thank you very much for sharing your knowledge. I read through entire thread over the past couple of days and for every question I had, I pretty much found an answer. If you have a minute, I'd like you to check out some of my questions (written before or while reading) and let me know if my thinking is on track or derailed.
1. What kind of penetration do LED's get?
Fantastic penetration! Just like with HID don't expect a 400w to penetrate further than a 600, and a 600 deeper than 1000w. With a large enough fixture running the correct wattage, 5' tall plants are not an issue.
they penetrate like john holmes in his early days of bangin hookerz :cool: if you build for a certain par @ a certain distance like 1000ppfd @ 18 inches from the fixture the light will be plenty bright to grow trees like a 1000w hps.i dont know how else to answer penetration questions other than par is par.led makes it very well with less heat per watt at the wall.
2. How far away should the fixture be from canopy?
That depends on how much coverage area is needed, how strong the light is and how sensitive the plants are to lighting.
yes
3. Is it generally 1 COB per ft^2?
Yes and No! (Don't you hate that bullshit cockamamie, indecisive reply. LOL) Generally it's 1 COB per ft^2, but this also depends on how much coverage area is needed and how hard you push the lights. Technically 1 COB running at 50% will light a 4'x4' area, but the intensity would be so weak, the plant would get no benefit. If 1 COB provided 1/10th the PAR needed to cover a 4'x4' area, then you need 9 more COB's to properly light the area and that may or may not equal 1 COB per ft^2. That would depend on how big the fixture is.
i think 30 to 40 watts per sq foot is a better build rule than just saying 1 cob per sq ft.
4. I think I just answered this question, but one of the questions I had was "what dictates how many COB's per ft2? If it was a static 1 COB/ft^2, is that why a 400w, 8 COB CBX3590 in a 4'x4' needed supplementation? I would assume per answer above, yes that's why the 400w needed supplementation, but that same set up running at 500w (just a number I'm throwing out there) as long as that didnt exceed wattage of COB may not have needed supplementation.
see last answer lmao
5. This isn't really a question, more an observation. Wattage is not where you start with your light, it's where you end up. You don't set out to build a 600w LED to replace a 1000w HID. You set out to build a light with a configuration that's matching or exceeding the output of the 1000w regarding coverage and PAR and it just so happens you built a 600w light. Does that make sense?
i pretty much planned all my builds on wattage for a given area.having used mars led and seeing how much better cobs worked i just decided i was going to lower my light bill by 1/3 or more.the first section i reworked i took down 1800w of hps and put up 1200w of led & uv t5.this has been a good # for my style of growing.
These are the questions I couldn't answer:
6. How much did your feed schedule change since the plants received a higher quality of light?
my plants need a bit more nutes but also more attention to the amount of water they are drinking now.im having to use a bit more water mid flower.so i have been doing strong feeds in the morning and just water late day on bigger stuff
7. On one of the pages you stated 450w of COB driven at 1050 or 1400mA is going to be as good as maybe better than a 600w HPS, 500w COB will spank a 600. Does that also apply to DE HPS fixtures also? Sadly, I've had a Gavita 6/750 for about a year and pulled my best harvest yet with it, but after reading this thread and a few others, I'm looking to replace it because the heat is a big issue for me.
i ran 2 clones against each other.one under 750 gavita and one under 550w cobs and uv bulb.the cob plant had better grams per watt,better smoke,easier to trim..but yes i feel 500w of good led spanks any 600hps
8. Speaking of Gavita, can the LEP's be recreated with LED technology? In my ignorance, I'd have to say I dont see the benefit of trying to recreate an LEP if you already have one because the LEP's dont produce a lot of heat nor pull a lot of wattage anyway. My old 300 air cooled LEP aint the problem, its that motherfuckin 6/750 thats a bitch! A beautiful, aggravating bitch that give phenomenal head. LOL
led lacks uv,thats about the only downside of spectrum.but easy enough to supliment if your into that kinda shizzle.
9. Overall, is the 3500K COB driven at 50w the best best for a start to finish grow?
i prefer 3000k start to finish and 2700k flower only.but lots of guys kill it with the 3500k.i have some,and those plants are fine.too short for me personally so i end up keeping them away from the lights for weeks 1 and 2 to get my stretch on then bring them closer for the rest of flower.2700k is perfect for me,set it and forget it.
10. Go with CREE CXB3590's if affordable, everything else is second place?
cree vero citizen luminous,we are splitting hairs now on quality.if price is your thing get the vero or lumi.im a fan of cree but i have vero and shitizen.i like the vero lol
11. Can umols be calculated on paper or do I need a meter?
par/ppf/ppfd can be calc'd on paper but dont ask me how,i like using my meter to find weak spots in the layout.no second guessing my math lol.there are online calc's for vero,cree ect.none of them have worked for me though,i do see lots of guys using them.
12. Whats the minimum PPFD needed for our favorite plants?
im doing fine at 600ppfd in some areas.but i have spots that are at 1000ppdf that grow awesomer :)
Thanks again for your time and knowledge. I think thats it for now. Please let me know something I should have asked but didnt. Once I'm closer to actually building a light I might come back for references on where to source parts. How are you liking those quantum boards? See any benefit over a COB?
Speaking of seeds,got some baby pics
Empire dreams-blue dream x onycd
View attachment 693842 View attachment 693843
Some grape dosi
View attachment 693847 View attachment 693848
Gelato x tk
View attachment 693850 View attachment 693851
good eye,i wish it was a gibson.thats a knockoff i picked up from my neighbor about 15 years ago.before they moved they had a garage sale and i took that and a decent peavey amp for 200 bones. it plays ok but i hardly touch the thing.i have a real nice les paul and SG plus 4 nice acoustic axes.i mostly play a seagul electric acoustic or my beater fender.just showing my wife how you support the heavy buds with tomato/bamboo sticks and noticed the first picture with a Gibson ES 335 ... or at least that's what it looks like. I bought a Fender Strat a million years ago it seems, don't play it anymore but every once in a while I'll pick it up and make really horrible noises from it };-) BTW, I really wanted a 335 but couldn't afford it at the time.
As i read this im sittin her listening to my 12" canfan screaming in the basement haha.Imo the vortex is worth the extra cost for the quality of it.they are also more quiet than any of the cheaper knockoff fans by alot ime.over the years i have tried alot of dif brand inline fans and vortex and eclipse are the top 2
Well lets not be crazy here,aint no 12in inline thats gunna run quiet lol.i have a 10in vortex i just mounted to the ceiling in my new shop and im kinda disappointed i went with that instead of a 8in.seems a big difference in noise just going up 1 size.plus this 10in gets louder the more you slow/dim it.As i read this im sittin her listening to my 12" canfan screaming in the basement haha.
Thats what she sed haha.....Well lets not be crazy here,aint no 12in inline thats gunna run quiet lol.i have a 10in vortex i just mounted to the ceiling in my new shop and im kinda disappointed i went with that instead of a 8in.seems a big difference in noise just going up 1 size.plus this 10in gets louder the more you slow/dim it.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?