The Dawg
- 116
- 63
:puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2:with that said the cob i posted above is DD bin and at 35w will crush ANY cob :cool:
:puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2::puke2:with that said the cob i posted above is DD bin and at 35w will crush ANY cob :cool:
do you overtighten the refl. holders to get even preasure? seems to me when they tight the holders bend out...not bent out they not putting much preasure on the cob at all....transfering the heat im rhinking the tighter the better...Chilling in the shop slappin up some more LEDs morning dawg n stacks :)
View attachment 768244 View attachment 768245 View attachment 768246 View attachment 768247 View attachment 768248 View attachment 768249 View attachment 768250
maybe bend a little but i wouldnt say overtighened lol.when im doing those screws i use one hand to push down on the cob holder while i tighten the screws with the other handdo you overtighten the refl. holders to get even preasure? seems to me when they tight the holders bend out...not bent out they not putting much preasure on the cob at all....transfering the heat im rhinking the tighter the better...
wats ur take on it six
The smaller those lil holders are the easier the chips are to pop out too. My citizen holders hold chips fine but these smaller cree I had to do what you do to keep them from popping out. I also ordered thermal tape that was a lil too thick so that presented another problem.maybe bend a little but i wouldnt say overtighened lol.when im doing those screws i use one hand to push down on the cob holder while i tighten the screws with the other hand
:crying2:Hahaha. Well, being I've only used shitizen I'm sure I won't miss much. One day my cheap ass will buy some good chips lol.there was a time those lil 2540 cree were the shizzle bbp,but hat time has long passed hahahaha.
naw bro i be they are bright as fuck
Well, damn...there goes wearing my favorite light building skirt:D.Get Off The Pad. You 2 Sound Like A Couple Of Hens Cackling On About Their Pad Size Jesus. Real Men Use Arctic MX-4 Thermal Compound :party1:
Yea I Do Have The Industrial 20 Gram Tube :cool:pipe down rover,ya cheap bastage,prob got that shit all over ya grow room cant swing a chew toy in there without getting some grease on it :jimlad:
Finally some real music.
No Shit.Finally some real music.