Terps House

The Terps · Oct 30, 2016

The 8 light with coco beds are doing very well. Day 9 still using up the last of the mills before I switch over to Meeks recipe. Probably next week or so

The Terps · Nov 13, 2016

Harvest pictures for the Sherbert

And an update on the coco beds below

nMEEKS · Nov 13, 2016

Looking great in that next round! You're gonna need another layer of screen in there maybe, girls are reaching for the sky. Still running Mills or you swap over to my recipe already?

The Terps · Nov 14, 2016

I ended up having another quarter jug of a&b so that's all mills thus far. @nMEEKS. But I need to get on mixing my next batch before I start looking for a third tail to chase lol. But they are on day 27 so they won't stretch anymore but ya third trellis is a maybe currently. If I can get by with two it makes harvest much easier. They are about 7" above top net so I should be alright.

The Terps · Nov 14, 2016

9 light got stripped down today and gets flipped tomorrow. Been busy working on the 6 light room turning it into an 8 light just like the other room coco beds and all got the wall cut out and a door almost hung I hate hanging doors and tables framed up. Tomorrow I will have the dehu moved lights hung and hopefully the tables done.

The Terps · Nov 27, 2016

So here is the 8 light update

And here is the little 6 lighter remodeled to be a replica of 8 light room above. This room now has 8 lights gypsum infused coco beds just as before a 3 ton and a 2 ton m/s and a mess of sherbert will finish the irrigation today and get an update on the 9 light tomorrow.

Savage Henry · Nov 28, 2016

How're you and the ladies liking the gypsum thus far? Start on the Meeks formula yet?

The Terps · Nov 28, 2016

Not sure about the gypsum the plants are thriving so I'm sold on it a small effort to do really. But I can't attribute anything scientific to gypsum. And no I ended up buying more mills cause I've been so busy remodeling. I also got a new warehouse that's been eating up my spare time. I need to do the math on all my dilution rates and ratios and it just seems like a two hr project for a later date.

However I forced myself to only buy a gal or two 1/2 gal so I would be forced to mix soon. The newest remodel 8 light has sherbert in it and it doesn't have another feed of mills I'll have to mix really soon.
But I'm excited to get on it I'm worried about not running a bloom booster however. Might mix up something around week three till flush if anyone has suggestions.

Savage Henry · Nov 28, 2016

The Terps said:
Not sure about the gypsum the plants are thriving so I'm sold on it a small effort to do really. But I can't attribute anything scientific to gypsum. And no I ended up buying more mills cause I've been so busy remodeling. I also got a new warehouse that's been eating up my spare time. I need to do the math on all my dilution rates and ratios and it just seems like a two hr project for a later date.

However I forced myself to only buy a gal or two 1/2 gal so I would be forced to mix soon. The newest remodel 8 light has sherbert in it and it doesn't have another feed of mills I'll have to mix really soon.
But I'm excited to get on it I'm worried about not running a bloom booster however. Might mix up something around week three till flush if anyone has suggestions.

I hear ya, time is a hell of a commodity.

I was going over his formula the other day and it looks like, in lieu of a bloom booster the calnit could be reduced the last couple weeks of flower and the same effect as an additional booster could be had.

Running the formula straight up appears to already have 80ppm P.

The Terps · Nov 28, 2016

Ya I feel like I'm just hitting my stride and am slightly reluctant for change also but I will be switching to that formula in the near future

The Terps · Dec 21, 2016

Sherbert day 18 light Chem left glue right day 60 doesn't look like they are going to tip over but fingers crossed and I'm not sure that's a good or bad thing lol 9 light day 37

Savage Henry · Dec 21, 2016

Nice work, homie.

The Terps · Dec 21, 2016

Thanks man just about finished with a new warehouse also it's been pretty hectic since thanksgiving. But crushing it right now just need my luck to hold up. Can't spare the time to have an a/c fail or something like that. Can't wait to finish this project and get back to being a grower and not a build out guy.

Turning out pretty slick though. Two 8 light rooms with 5 tons each 5 sun system 315 mother room and a 3 315 veg room a dry room and even a rosin room. Shooting to have the first room planted in the next 10-15 days

BombBP · Dec 21, 2016

Omg you're a great grower!

The Terps · Dec 22, 2016

Don't remember it's about 7" tall each light 5'x5' so you can plug that in to a soil calculator. I won't tell you how much I water cause that's a place to place strain to strain flow rate zone length and yadada. Typically when past week 2 flower I water 1-3 times a day for one minute intervals. I keep my coco on the wet side always @Wentworth but actual volume of water no idea. However it is very consistent day to day.

The Terps · Dec 22, 2016

Room 1 room 2 veg room dry room mouse in the brand new 2 ton wall mount for the mother room

The Terps · Dec 22, 2016

Sherbert room

The Terps · Dec 22, 2016

@Wentworth ya it's an 08 450r I have pretty much given up skating and dirt biking 2-3 years ago. As I can't use them responsibly. Never happy unless I'm progressing and performing at a high level and they are just to dangerous. The risk to reward level just became to high. Now a days I get my jollies from fly fishing and riding powder on my board. Can't afford any more injuries so I'm actually going to sell my bike soon to upgrade my drift boat.

Savage Henry · Dec 23, 2016

Wentworth said:
Oh yea noticed you used fabric ducting at your other spot but went w spiral pipe for your ducting at the new spot. You have issues w the fabric? Thanks again ;)

I noticed that fabric ducting as well, didn't know that was a thing. Looks like it could come in handy for the intake in my air exchange room. Mind if I ask where you sourced it?

The Terps · Dec 23, 2016

The fabric I got with an excel air unit. fabrics fine but the company product and service is shit they sent me a damaged unit then damaged replacement parts told me they would reinberse me for my mechanic to literally take apart the whole thing. And they flaked on the reimbursement. I hate that company lol.
Your local a/c guy should be able to source it though. I will tell you first hand i will never buy an a/c through a store again always issues pick an a/c guy buy everything through them that way WHEN they fail it's a smoother ride.

The new spot has the new 16 seer 5 ton ruuds so they should kick those 8 lights ass.
Beats the hell out of my mini splits though. Won't ever buy one of those again either

Terps House

Terps House

The Terps

The Terps

nMEEKS

Horticulturist

The Terps

The Terps

The Terps

Savage Henry

The Terps

Savage Henry

The Terps

The Terps

Savage Henry

The Terps

BombBP

The Terps

The Terps

The Terps

The Terps

Savage Henry

The Terps

Privacy & Transparency

Privacy & Transparency