The lab of jaws!!

[crom]

CROM
yes my friend i have been thinking about such a thing but i never thought to run MUTI pvc pips along the three sides i was thinking a + type pattern but i dont think that would be good enough, i think id end up with 4 squares on each side STILL pulling in out its self instead of just one whole side....

may be do 4 pipes per side would be the ticket, ive also been struggling to get a fan properly afixed to the tent....awhle back i ran into a dude that had a decent idea how to get that done but ive lost the thread and he never really got into it to much before he disapeared, he showed one pick and it loked pretty doable but now my minds a bit fuzzy on exactly how he did it...

it was a high corner set up where he brought two PVC pipes in at an angle from the corner then droped another PVC pipe down from the and lastly yet another PVC pipe from the bottom of that down to and attatched to the corner poll....the PVC pipe that was attatched to the first two angled pipes was the one that held the fan in an up-side down direction, this alloud the fan to be able to rotate...

it was a very solid idea but the whole set-up is somthing i need to be looking at to begun trying to do it myself...

I have a great idea for your fan hanging needs! Peep it! Get a piece of plywood or similar light wood drill two or more holes in the top and affix it to the top pole support with zip strips. Now drill screws or whatever hanging method you need to hang a wall mounted fan. The weight of the fan itself holds the board from swinging too. Enjoy that...hope it helps you guys!

Crom

 

[JAWS]

hello CROM:)
AHH HAA now your speaking in a manner in which i understand, i'll be looking into that one for-sure!!!
thanks my friend;)

 

[crom]

Best part is you lose no floor or ceiling space. I don't think I'll use another fan hanging method till something else comes out. You could even use a hard plastic "board". As long as it can support the weight of the fan and isn't too heavy that it bows the support bar. Works great actually, if I do say so myself lol

Any other tent conundrums you need help with JAWS? I have an interesting brain when it comes to figuring stuff out/rigging stuff!

Cheers,
Crom

 

[Skummy]

I use the small window unit fans and put a zip tie in the vent and hang it from a.single light hanger... Because of the fan.blowing and being on a single string it winds up and unwinds.. Its worked for me before and I am doing it again.... I will get pictures in a while when I get to the spot.....
This thread is awesome I enjoy all thr knowledge being shared!

Crom has the best idea ive seen so.far though... Definitely gonna do that next round!

 

[Skunkmasterflex]

Do that next round, shit......I'm already taking my hanging fans down and putting up a board to use the wall mount fans from when I used rooms last year lol. Good looks crom, I thought of something like this but didn't really ever put two and two together. Word up yo ~Smf~

 

[JAWS]

hey CROM:)
i see your in a tent aswell what do you do to keep your sides from sucking in-ward??...i dont see any PVC pipe in that pic..
thanks dude:)

 

[crom]

Do that next round, shit......I'm already taking my hanging fans down and putting up a board to use the wall mount fans from when I used rooms last year lol. Good looks crom, I thought of something like this but didn't really ever put two and two together. Word up yo ~Smf~

No doubt smf! Glad peeps can get some use out of this idea! Only upgrade would be to use a material that is easy to disinfect. Wood may mold if rh is high. Just keep an eye on it or even wrap the wood in visqueen. I do believe that hanging upside fans shortens the life of the fan too. Thanks for all the kind words fellas! Post pics of your fan mods!

Cheers,
Crom

 

[crom]

hey CROM:)
i see your in a tent aswell what do you do to keep your sides from sucking in-ward??...i dont see any PVC pipe in that pic..
thanks dude:)

Yeah that PVC idea was shot from the hip. I use a 5x5 tent with a 4x4 tray so I have room to not worry about wall suckage. You can also use the side zipper "windows" to house/hold a window air conditioner for cooling needs. Build a stand that supports the weight of the AC and fit plywood to fill the window space. Maybe that's confusing. Lol lets start here lol

Crom

 

[JAWS]

SEEDED GIRL SCOUT COOKIES

i cant say im getting an overwhelming THIN MINT smell but damn those little buds are as hard a buds as ive ever had between my fingers, ive been told this stain dont yield all that good but damn some small golf ball size nugs of this strain will weight out really well im thinking...

like ive said before dont judge this strain on this run im not, this was just an excited grower trying to get something to bud to see what all the fuss is about...next time will be the real test for me on this cut and right now i have a nice one vegging and will get 4-6 weeks more veg before she gets the flip...
peace:)

 

[leadsled]

As always, Looking good jaws.

Good one Crom!

Another tip for the fan board in the tent method.
Can use a metal pipe holder bolted to the back of the board. then you attach the board to a vertical pole in the tent. Can loosen the metal pipe clamp and move the fan up and down as the plants grow.

 

[socalval]

i smoked some of that this sat at a boxing party didnt taste any mint at all smelled a bit during the break down . deep chest expander though . what male did you use Jaws ? and whats the name of that cocco cherrie lady ?

 

[JAWS]

hello FRIENDS:)
LEAD
thanks brother lots of respect your way!!

SOCAL
so other then the EXSPANDO how was the RIP?...i was not really expecting an in your face type smell but was exspecting a bit more then im geting to this point...the only strains thats lived up to the SMELL and TASTE was the BUBBA KUSH it smelled like coffee and had a coffee coco taste....

the COCO/CHOCOLATE CHERRY lady i spoke about is from a ALIENDAWG F4 im runing that i got from my homie CANNARADO its the only one so far that has this smell to it, and i have one that just smell NASTY and several that are carring the CHERRY ODER....im really really hoping the COCO PHENO is a female but if not I WONT BE THROWING HIM AWAY he will be used or atleast he will be well taen cared of and hes good collected and stored for future use, may be use him on some CHOCOLATE DIESEL....

on the SEEDED GSC i used a male STARFIGHTER!!
peace:)

 

[JAWS]

ALIENDAWG F4 cannarado gear NASTY & COCO CHERRY

in the last pic above^^^ NASTY ON THE LEFT COCO CHERRY ON THE RIGHT!!!!

im now convenced that the NASTY is indeed the ETHER PHENO my brother CANN told me about, i just took two really good smells of her one straight and the other after a good stalk rub and i swear i felt quezzzing for just a second....and im not a shit talking and thats really what it felt like, ive smelt ETHER before and this dont at this stage smell much like the ETHER but im still covenced that this is the ETHER cut....and im sure that as she gets older her scent will bring a more ETHER smell to the party...

those are the two stand outs at this time im hoping for atleast a couple others following after one or both of these two, i have 3-4 that have a cherrish scent sooo yippy...
peace:D

 

[Burned Haze]

I have to admit I would jizz a little if i had a true cherry smelling genetic <3

Oh how I love the smell of cherries, keep them updates comming Jaws. BOMBER!

 

[thunderfudge]

I love the fact you are always on the cutting edge bro.a lot of the gear you are running I am just getting to so there's a lot of good info for me to absorb.always stoked for your pics.

 

[JAWS]

hello FRIENDS:)
HAZE
ya i like the CHERRY smell aswell i first smelled that years ago when i got a cut of the CHERRY AK47 from a buddy, this CHERRY smel is a bit different but still un misstable what your smelling and i cant wait to get these to dudding..

THUNDER
i dont know about the cutting edge but i do try to keep things mixed up and as interresting as i can, i get bored very very easyly even when dealing with our lovly CANNABIS PLANTS.....my bordom is what pushed me into CLONING--BREEDING--HASH & OIL making...
thanks guys;)

 

[Skummy]

Here is my ghetto fan setup.... It works okay but would be a problem if my plants were bigger

View attachment 215327

 

[crom]

^^ picture link isn't working, Skummy

 

[socalval]

the rip was kinda smooth. the exhale had my eyes watering and my nose burning . My ole lady said it taste like cookie dough . didnt knock me off my feet like the tahoe or the dj short .
Cant go wrong with a starfighter . Just wondering do you clone much or do you just pollenate a lower branch and keep it moving ?

 

[JAWS]

hello SOCAL:)
COOKIE DOUGH after taste would be a step in the right direstion if one was exspecting something from the name its self, and i keep hearing that the TAHOE is something worth atleast trying out!!....

YES SIR i clone constantly and im always BREEDING something in my grows, for me personaly it seems like a waste to do a grow and not get clones and make ATLEAST some F-GENS..

STRAFIGHTERS are doing/looking good hoping to get a decent MALE/FEMALE so i can some F2ing for my friends who could not AFFORD the price tag that cam with this strain....
peace:)