Log In Register

Who likes racing

  • Thread starter Thread starter Canappa
  • Start date Start date
  • Tagged users Tagged users None

Who likes racing

Canappa 190 Replies 20,069 Views
Page 5 of 10 · Replies 81–100 of 191
I' proud of the americans triumph with the C7 vette but is it really a production car...Hennessey ain't the mfg. but an aftermarket tuner/builder company...all props and respect for the speed but a production car should be made by the production company building it from the frame up...

and for tom bailey, yeah, he owns the title and gets mad props from this farmer...I'd gladly ride either...as for the scoot, no thanks...broke 46 bones to date, don't need more...

It's not even remotely A C7 Corvette and it is American built by Hennessey Performance Engineering from the bottom up... Read "Chassis Specs" bellow...
The Venom GT is Hennessey Performance Engineering's Frankenstein. Production is "Limited" to 10 units per year with A planed limited run @ A total of 29. Not A production "Line" car like A Corvette per say but it is in production, manufactured by A U.S. based company and decimates all other remotely similar Super Cars on the planet...



The Hennessey Venom GT is an American sports car manufactured by Texas-based Hennessey Performance Engineering.[2] It was revealed on March 29, 2010.

On January 21, 2013, the Venom GT set an average 0–300 kilometres per hour (0–186 mph) acceleration time of 13.63 seconds. In addition, the car set an unofficial record for 0–200 mph (0–322 km/h) acceleration at 14.51 seconds, beating the Koenigsegg Agera R's time of 14.53 seconds, making it the unofficial fastest accelerating car in the world.[3][4]

On April 3, 2013, the Hennessy Venom GT crested 427.6 km/h (265.7 mph) over the course of 2 miles (3.2 km) during testing at United States Naval Air Station Lemoore in Lemoore, California. Hennessey used two VBOX 3i data logging systems to document the run and had VBOX officials on hand to certify the numbers.

On February 14, 2014, on the Kennedy Space Center’s 3.22-mile shuttle landing strip in Florida, the Hennessey team recorded a top speed of 270.49 mph (435.31 km/h) with Director of Miller Motorsport Park, Brian Smith, at the wheel.[5] As the run was in a single direction and only 11 cars have been produced to date, and is not a series production car, but registered as a modified Lotus Exige, it does not qualify as the world's fastest production car in the Guiness Book of Records.[6]


Specifications
Chassis
The Venom GT uses a highly modified Lotus Exige chassis. The manufacturer, Hennessey Performance Engineering, claims the modified chassis utilizes components from the Lotus Exige, including but not limited to the roof, doors, side glass, windscreen, dashboard, cockpit, floorpan, HVAC system, wiper and head lamps. Hennessey Performance and the Venom GT are not associated with Lotus Cars. For road use, the car is registered as a Lotus Exige (modified) and is not in fact a series production car.[1]

The Venom GT has a production curb weight of 2,743 pounds (1,244 kg) aided by its lightweight carbon fiber bodywork and carbon fiber wheels. The brakes use Brembo 6-piston calipers in the front and 4-piston calipers in the rear. The rotors are 15 inches (380 mm) carbon ceramic units provided by Surface Transforms.

Drivetrain
The Venom GT is powered by twin turbocharged 7.0L [427ci] V8 aluminum engine featuring Ball Bearing Turbocharging system. The engine produces 1,200 bhp (895 kW; 1,217 PS) of power at 6,600 rpm and 1,155 lb·ft (1,566 N·m) of torque at 4,400 rpm. Engine power output is adjustable by three settings: 800 bhp (597 kW; 811 PS), 1,000 bhp (746 kW; 1,014 PS) and 1,200 bhp (895 kW; 1,217 PS). The engine revs to 7,200 rpm.

The mid-engine V8 is mated to the rear wheels with a Ricardo 6-speed manual transmission.[1] Hennessey claims that the car can achieve a top speed of 278 miles per hour (447 km/h), although this has never been tested.

A programmable traction control system will manage power output. Computational fluid dynamics tested bodywork and downforce also help keep the Venom GT stable. Under varying conditions on both the road and racetrack, an active aero system with adjustable rear wing will deploy. An adjustable suspension system will allow ride height adjustments (by 2.4 inches) according to speed and driving conditions. Michelin PS2 tires will also help put power to the ground.

Production
Hennessey manufactures the power plants at its facility in Sealy, Texas. The engines are then air freighted to the company's assembly facility near Silverstone, England where the Venom GT is built and tested. Venom GT buyers will be offered a 1-day driver orientation and instruction program by a Hennessey factory test driver at a track in the UK or USA prior to delivery.

Hennessey plans to establish a network of Venom GT dealers and distributors in the Middle East, Europe, Russia, Australia and Asia. Production is limited to just 10 vehicles per year. The 750 hp Hennessey Venom GT price starts at 600,000 USD while the 1,200 hp version starts at 1,000,000 USD. If you want the car in Europe, the Hennessey Venom GT price goes up by just under 25,000 USD. As of February 28, 2014, 11 Venom GTs have been manufactured.[7] Hennessey have announced that they only intend to build a total of 29 of these cars.

Venom GT Spyder
The Venom GT Spyder is an open top version of the Venom GT. Having decided to order a Venom GT, Aerosmith lead singer Steven Tyler approached Hennessey in Autumn 2011 and asked if an open-top version could be created. This involved structural changes which added 30 pounds (14 kg) to the curb weight. Tyler's was the first of five cars scheduled delivered for the 2013 model year
 
B

boo

Guest
no doubt it is a superior car but can you really call 10 units per year and a total of 29 a production car...without splitting hairs...I'd own one if I had that kind of coin...and a '14 COPO to match my '69 COPO and my L=89 SS...thanks for the info phoenix...good stuff
 
just a fyi nascar rules call for any model raced to be a "production" unit of more that 500 to be valid

Detail, details ;) I understand where your coming from... I don't mean this in an insulting way :D

Hennessey states "it does not qualify as the world's fastest production car in the Guiness Book of Records" They do not state it "Is" A production model though others have called it that... but what I do know is they have built A number of bad ass cars. It is street legal, sold to the public (if you can afford it) and when it is put side by side with anything out there it is the only one that can claim A recorded top speed of 270.49 mph.

Super Cars like the exotics I'm talking about can only be afforded by few @ best anyways and this one, by all means, will be more desirable (do to it's limited production run) more collectable, (limited # cars throughout history always are) and I would bet car fanatics that can afford these baby's would opt for One of the Few before One of the Many and that is what it really comes down to when it comes to Exotics... One of the Few :greedy:
 
I start HERE on this discussion-"high and mighty".tuned exhaust, ram air....serious innovation for the day.
Pete micnickol
 
I like it, I like it A lot. Ever hear of A stoppie? Some 6 piston 14" Brembo's and A little practice... Check the video, give you any idea's? :wacky:

 
Chromed piece of railroad track for A rear bumper perhaps? Joking of course :woot: looks really nice by the way... but I do know people that have literally sand bagged the ass end of cars to make um stick ;)
 
Ooooooooweeeee damn brother im digging your ride...I had something like that years and years ago she was more of a farm truck however and was certainly not built like yours. I love that body though..
 
I'm trying to do the same in reverse with this...traction is a joke with this sled...View attachment 385597full tube chassis, 4 link, rack and pinion and all she do is drag on speed bumps and make alot of noise...but it''s fun...Goliath is his name...he wears 22" shoes on the back

4-Link tuning... This is the way I got the most from my link set-up. The angles make all the difference. Blue in this snap shot is desired over red. The closer the imaginary point of intersection of upper & lower link to the center of the vehicle and under your seat for A car is best (similar for truck) and the lower it is the harder it hooks... in both the examples the intersect point is off the chart to the right. The lower right (X) points on this graph example would have you pulling asphalt from the ground :wtf: Moving one or both blue links to get closer to those points would improve Hook-Up ;) Maybe you already know... If not, Hope it helps :woot:

4-Link-Picking-Anti-Squat-Roll-Steer.gif



Watch This boo... There is Always A way ;)

 
B

boo

Guest
wow, thanks bro...I can relate to 19-30 seconds...she does great burnouts...not really built for racint as theres no roll bar set up...it was gonna be restored but obviously that never went down...appreciate the 4 link chart...


pssst...anything I post is for sale...
 
wow, thanks bro...I can relate to 19-30 seconds...she does great burnouts...not really built for racint as theres no roll bar set up...it was gonna be restored but obviously that never went down...appreciate the 4 link chart...


pssst...anything I post is for sale...

Goliath don't need to be A Racer to Hook-Up, It makes A huge difference on acceleration ;)
 
B

boo

Guest
a friend of mine are discussing the 1/4 mile in Goliath right after we do a few test and tunes on the new roller motor in the camaro I'm building...he's the geometry guru, he sets up chassis and power trains all day...really a worldly old school craftsman who happens to be my best friend...this dude makes his own firearms, he's just good at everything...nice perk, he's a liscenced a/c guy so I keep my cool in the summertime...I've 6 a/c units here at my casa so it's important to keep him smilin...he's my biggest fan...he's been talkin 4 link to me, coincidence...again, thanks...great place to start
 
Hey all do you guys think it may be a good idea to have my Ramjet 350 engine fine tuned by a computer in a shop equipped to analyze and fine tune?
Factory new 10,ooo miles runs fine except it seems when gas tank hits just below 1/4 engine acts like its vapor locking...
Also air heat sensor is close to hot air from fan, wondering is that should be moved to detect cooler air...
would vbe a 500 mile cruise to shop, but may be worth trip to see if they can fine tune for max performance...
 
Hey all do you guys think it may be a good idea to have my Ramjet 350 engine fine tuned by a computer in a shop equipped to analyze and fine tune?
Factory new 10,ooo miles runs fine except it seems when gas tank hits just below 1/4 engine acts like its vapor locking...
Also air heat sensor is close to hot air from fan, wondering is that should be moved to detect cooler air...
would vbe a 500 mile cruise to shop, but may be worth trip to see if they can fine tune for max performance...

I would check fuel line routing, if RamJet is similar to traditional fuel injection with A loop system fuel return to the tank which I believe it is, than the lower your fuel level gets the hotter the fuel becomes. Heat transfer from the pump and close proximity to headers etc. could easily explain what you describe because the level of fuel in the tank would have A direct effect on heat dissipation... High fuel level keeps things cooler but can only do so much. My 2¢...

As for tuning... there is always room for improvement but with the controller that you have and the fact that G.M. has put A great deal of time in tuning for readily available pump gas I wouldn't sweet it if she runs good. You might Eek out A little more power but suffer with detonation issues in tuning for power because traditionally ignition timing is on the conservative side to avoid this issue...
 
B

boo

Guest
a simple explanation would be that there is a void or air opening on the lower part of the fuel pump or pick up...when gas is low the suction goes to the path of least resistance which would be to draw air vs. fuel...mebbe too simple...if you've got a controller you'd most likely not get all that much outta tweaking or dyno tuning but there will be gains, worth the effort or not...as phoenix mentioned, look for a return line to the tank, it may have never been installed...
 
Page 5 of 10 · Replies 81–100 of 191
Back
Top Bottom