SeaF0ur
- 1,190
- 263
i was told by several people that you shouldn't trust any account asking for herb. cops were the only reason stated. haven't you heard of bait and switch?
there are many reasons from cops to rippers and robbers...
i was told by several people that you shouldn't trust any account asking for herb. cops were the only reason stated. haven't you heard of bait and switch?
HmmIs this the one I pointed out on Amazon or was that not you i was talking to about this?
That's what I have to do with some of my air stones, I have a couple of these & the suction cups last about 10 seconds. They degrade & no longer work, almost instantly it seems. So I blob some silicone under them, it's the only thing that will keep it down.im thinking of just emptying the water and gluing that fucker down so it can't move...Any other or better ideaS??
umm...My immediate thought, after I run through it again in my head
I was about to ask what the purpose was, but the I saw that it's not directly above the led.Got the tube in !!
View attachment 561604
Checking the thought. Because it's your first thought, doesn't mean you should say it...sometimes you will look stupid if you don't give it a quick proof read.umm...
So I forget who all said they had the cloner the "Clone King" but I just got mine a few days ago and am running into 1 issue. Pretty much anybody that uses an underwater water pump could prolly help...So you gotta connect the piece of fabricated plastic that holds all the spray jet heads to the water pump which is under roughly 1 or 1.5 gallons of water. Now the pump has those suction cup things to make it stick to the bottom of the clone, my problem is that every time i lift up the top to check out whats going on i see that the pump has slid around and is usually sitting like tipped over making the water just spray in one corner. I keep un plugging it and re setting the suction cups then sliding the pump back on the cup thingies but 30 mins later its back moved around and tipped over...Anybody got any suggestions on what I should do?? It's frustrating my so much im thinking of just emptying the water and gluing that fucker down so it can't move...Any other or better ideaS??
Now I'm confused...is it that the suction cups won't hold? Or that the pump won't stay in the stand?Mine hasn't moved since day 1. Did you slide the pump into the tabs on the piece that had the suction cups? There are 2 lil tabs on each side of that black piece that holds it in place. If it's not locked into those it will move freely.
Do not glue it down incase you want to clean it it some day.
They have some really good and really bad vendors man. Sea is right. Go with the vendors with the gold seals that have been there a while.@SeaF0ur
Do you order much from aliexpress.com?
Any comments on them?
yes i keep sliding it on but it doesnt really lock..it kinda does but very very lil force slides it right back off...i think maybe if i find i way to secure the suction clip part to the pump so it doesn't come loose id be good.....Do the suction cups work better if you try to stick them to the bottom before the water is in?Mine hasn't moved since day 1. Did you slide the pump into the tabs on the piece that had the suction cups? There are 2 lil tabs on each side of that black piece that holds it in place. If it's not locked into those it will move freely.
Do not glue it down incase you want to clean it it some day.
Now I'm confused...is it that the suction cups won't hold? Or that the pump won't stay in the stand?
If it's the latter, it's like @BlackSheepOG said, the pumps have a sweet spot in the holder. The holder really only holds it from moving L or R. Forward & Back (at least all my pumps) is not a lot of pressure. So, if it's too far forward or backward, it won't hold it L or R either.
If it's like all the other pumps I've seen, a hose or a connection must be pushing it out of the sweet spot. Because if it's in the holder, it should stay. It sounds like a hose (maybe it's cold & inflexible) is moving it around on you.
how did you extract this? butane? how much product did yo run?
yes i keep sliding it on but it doesnt really lock..it kinda does but very very lil force slides it right back off...i think maybe if i find i way to secure the suction clip part to the pump so it doesn't come loose id be good.....Do the suction cups work better if you try to stick them to the bottom before the water is in?
how did you extract this? butane? how much product did yo run?