THCFarmer.com
121,267 Members Log In Register
Log In Register

Commercial Rosin Presses

  • Thread starter Thread starter mittenmedgrow
  • Start date Start date
  • Tagged users Tagged users None

Commercial Rosin Presses

mittenmedgrow 145 Replies 60,539 Views
Page 6 of 8 · Replies 101–120 of 146
#101
Bulldog420 said:
Also, you would have to be a very special individual to spend 12k on a press..........That thing is worth maybe 1500, build it yourself.....
Click to expand...
I am in the process of building a trimmer as far as I can tell I will have $500. In it and it will be just as nice as anything you would pay 5-8k for. I probably already have everything to do a rosin press.
 
#102
The best one I've seen so far is from Pure Pressure, they are in Denver, Colorado.
My friend was getting 22-26% yields on flower (it was chronic though, not mids) and around 52% on kief and dry sift.

Does anyone else have experience with their Pikes Peak press? The website is www.gopurepressure.com - apparently they make everything here which is a plus.
 
#103
eric89 said:
The best one I've seen so far is from Pure Pressure, they are in Denver, Colorado.
My friend was getting 22-26% yields on flower (it was chronic though, not mids) and around 52% on kief and dry sift.

Does anyone else have experience with their Pikes Peak press? The website is www.gopurepressure.com - apparently they make everything here which is a plus.
Click to expand...
Looks sophisticated, but $5500 is a hard pill to swallow.

I don't want to Martha Stewart my shit either. Sure, you can save a lot on dairy products if you churn your own butter, too. I just have way too much going on myself.

I need to find something in between. Luckily there are many manufacturers now.

I checked rosin groups on FB and found
* The Squisher, from RosinPresser, $2400
http://www.rosinpresser.com/shop/thesquisher

* PuffTuff for $1100
http://www.pufftuff.net/product/puff-tuff-rosin-pneumatic-heat-press/
http://www.pufftuff.net/product/puff-tuff-rosin-pneumatic-heat-press/
or I can get wholesale on the EZ Press Pro, I think $3k to me?


Any other recommendations? Would you guys choose one of these ?
 
#104
Bulldog11 said:
Just for reference, with my t-shirt press I can press up to 14g a press. (with a 4x4 plate)

You have to be careful. Some of those machines speck out what the psi of the pump/press/machine in total does. That is what worries me about that small plate...... In my mind, small plate = not enough psi.
Click to expand...
Last time I checked the smaller the object the greater the psi I might be wrong though :)
 
#105
mancdank said:
Last time I checked the smaller the object the greater the psi I might be wrong though :)
Click to expand...
I believe you are right! Makes sense, yeah?

Im getting a dry sift tumbler, thinking a smaller micron size since Im using last year's trim... not so fresh. Dry tumble, small screen, short duration = best terpene results? Im aiming for whatever quality I can salvage at expense of volume...

There's so many options availble now, its great. And I know a lot of effort goes into building them, though one can DIY it. I simply don't have the time or interest. That's why Im trying to get advice or comparisons. Too much trim to mess with a hair straighter or a small one, would rather not spend $5500-6k, althought the costlier ones look digital, etc etc
 
#106
Funkadelic said:
Looks sophisticated, but $5500 is a hard pill to swallow.

I don't want to Martha Stewart my shit either. Sure, you can save a lot on dairy products if you churn your own butter, too. I just have way too much going on myself.

I need to find something in between. Luckily there are many manufacturers now.

I checked rosin groups on FB and found
* The Squisher, from RosinPresser, $2400


* PuffTuff for $1100
http://www.pufftuff.net/product/puff-tuff-rosin-pneumatic-heat-press/
or I can get wholesale on the EZ Press Pro, I think $3k to me?

Any other recommendations? Would you guys choose one of these ?
Click to expand...

No doubt, the price point is steep. I think Rosin Technologies' press is also well rated and smaller output. I think the Pure Pressure press is made more for commercial level production as opposed to at-home tinkering.

We squished some Shiva yesterday and it turned out really well, the plates are 10x2 or 10x3 depending on which one you want. It's fun to press flower because if the terpene content is high you definitely get a sappier material.
 
#107
eric89 said:
No doubt, the price point is steep. I think Rosin Technologies' press is also well rated and smaller output. I think the Pure Pressure press is made more for commercial level production as opposed to at-home tinkering.

We squished some Shiva yesterday and it turned out really well, the plates are 10x2 or 10x3 depending on which one you want. It's fun to press flower because if the terpene content is high you definitely get a sappier material.
Click to expand...
Super appreciate the feedback, bro. Yeah there are units at all price points but small runs come at a cost of time. Its hard to tell from web photos with no point of reference.
 
#108
Bigoutdoor said:
I am in the process of building a trimmer as far as I can tell I will have $500. In it and it will be just as nice as anything you would pay 5-8k for. I probably already have everything to do a rosin press.
Click to expand...


I'd deffinately be interested in that trimmer. My 2 trimmers aren't worth a shit lately, and my RA in my hands tend to tell me about 1hr into my.36hr trim session that it's not gonna happen today.
 
#110
DemonTrich said:
I'd deffinately be interested in that trimmer. My 2 trimmers aren't worth a shit lately, and my RA in my hands tend to tell me about 1hr into my.36hr trim session that it's not gonna happen today.
Click to expand...
Just finished it , haven't had a chance to test n tune it yet but it is going to be a lot easier to get things done.
 
#111
Is it a wet or dry? Been rocking a 19" bowl trimmer for 3 yrs. It's holding progress up. Lol. Was gonna pull the trigger on a t4 or centurion, but the $5k tag is stopping me.
 
#114
DemonTrich said:
Is it a wet or dry? Been rocking a 19" bowl trimmer for 3 yrs. It's holding progress up. Lol. Was gonna pull the trigger on a t4 or centurion, but the $5k tag is stopping me.
Click to expand...
Wet seems to run better than dry but it works either way, it's a back yard job, I had a old generator, I used those electrical circuits and wired in a two stage electric motor took a piece of stainless tube I found at the junk yard cut my slots , and tried it out, at first I didn't have the slots to cut wide enough then I had to take the stainless tube to my machines that to get a good edge put on the inner lip of each slot, when I say it saved 100 hrs I mean it.
 
#115
GrowGod said:
Lmao
Click to expand...
Are you in or close to new England? You two trimmers can be upgraded for next to nothing, I would have to actually look at them to know exactly what I can do but I guarantee I can make the trimmer better than new. Likely more efficient and effective
 
#116
What about this one . Didn't see this one mentioned in the thread yet. Says it has a 8x16 plate. Let me see if I understand this... 8x16=128in, it has 12 ton jack that's 24,000
24,000/128= 187.5 psi? That's not near enough right?
 
#118
check out my sig. Extracted Colorado made my machine, and I love it.
mancdank said:
Last time I checked the smaller the object the greater the psi I might be wrong though :)
Click to expand...

You are not wrong, but missed my point. When a machine has a small plate, that means TO ME, that the overall PSI of the machine is low. Otherwise, why have a small plate?
 
#120
Bulldog420 said:
check out my sig. Extracted Colorado made my machine, and I love it.


You are not wrong, but missed my point. When a machine has a small plate, that means TO ME, that the overall PSI of the machine is low. Otherwise, why have a small plate?
Click to expand...
I see what u mean now :)
 
Page 6 of 8 · Replies 101–120 of 146
Back
Top Bottom