Critique/modify My Cloning Solution

[Vonkins]

Everyone has there own way but when I see bumps and no roots, it means there getting hit with water 24/7 and they're not gonna work to make those roots properly, you need oxygen, I mentioned the timer and 30/30 intervals. Dude all that crap you listed you put in is shit you put into a grown plant. Add 30ml clonex to your resevoir only and dip your clones immediately after you make your cut in any rooting gel. I like my water temps at 62-65

The only thing in my res in kln and protekt. Bleach at .2 ml/gal

 

[Vonkins]

I thought and have even read a timer is only to control temps in the res. I believe somewhere on this thread I asked if a timer promoted rooting. So u say a timer does promote roots to form. I have a timer with 15 min increments. It is now set to 15 on 45 off. I'm willing to try anything at this point. Still nothing. Not nubs dots, not shit!

 

[brazel]

What's cloning with beneficials!?

 

[GT21]

What's cloning with beneficials!?

soaked the puck once... plugged and domed... no spray bottle or nutrients added to the water. ...tap water is 7.5-8. I leave the dome on for 2 days then crack it open and blow air in to the dome....then close it back up

Why would you open the dome everyday when youre trying to build moisture? Youre dumping all the moisture out of the dome then spraying it back in hahaha

 

[Vonkins]

I think I hear some rockwool my humidity dome getting friskey in the closet.

 

[RHINObeast]

I think I hear some rockwool my humidity dome getting friskey in the closet.

Bro it works, have done it repedetively, if anything go 15 on 30 off, I think that's a bit long of a gap with it off. I used to scrape, stopped that shit a long time ago. I had rooting issues just like you and asked this thread for ideas and you wanna know what, the timer and not scraping was the best solution ever thought here. Try it out, I got guaranteed results. @GT21 those are super nice dude

 

[RHINObeast]

Bro it works, have done it repedetively, if anything go 15 on 30 off, I think that's a bit long of a gap with it off. I used to scrape, stopped that shit a long time ago. I had rooting issues just like you and asked this thread for ideas and you wanna know what, the timer and not scraping was the best solution ever thought here. Try it out, I got guaranteed results. @GT21 those are super nice dude

Also immediately after you take the cut dip it in gel, don't wait, don't leave it out, seal that bitch shut

 

[GT21]

Also immediately after you take the cut dip it in gel, don't wait, don't leave it out, seal that bitch shut

Thanks bud...I make my stem cut under water and i scrape the stem a bit under water..then take out and dip n go!!!

 

[Vonkins]

Also immediately after you take the cut dip it in gel, don't wait, don't leave it out, seal that bitch shut

I usually have a cups worth of my cloning solution with me while taking cuts. I stick them in there immediately, sometimes soaking for 24hrs but usually only 10 min or so

 

[Vonkins]

My water taste fine but with all the overkill with cleaning and all I've done I swear I got root inhibiting water. Just joking but still I don't understand how I can clean literally 5 times as much as another guy, overkill. Then add cleaners and rooting aids to the rez at the proper amounts, achieving shit, while another fella will go through my same cleaning regimen, not as intense, use plain non ph'd and this lucky or skilled SOB will have 80s hairband type roots. I'e tried plain water Ph'd and not Ph'd. Only reason I started using kln and protekt is because I've seen too many people with mop head roots in the aero/bubble cloner. Can someone please fucking tell me what I'm doing wrong? Please damnit?

 

[GT21]

My water taste fine but with all the overkill with cleaning and all I've done I swear I got root inhibiting water. Just joking but still I don't understand how I can clean literally 5 times as much as another guy, overkill. Then add cleaners and rooting aids to the rez at the proper amounts, achieving shit, while another fella will go through my same cleaning regimen, not as intense, use plain non ph'd and this lucky or skilled SOB will have 80s hairband type roots. I'e tried plain water Ph'd and not Ph'd. Only reason I started using kln and protekt is because I've seen too many people with mop head roots in the aero/bubble cloner. Can someone please fucking tell me what I'm doing wrong? Please damnit?

Whats cleaning? Is it like jogging? Sounds like a lot of work.

 

[Vonkins]

No slime, stems looks perfect, rez smells exceptionally clean but NO FUCKING ROOTS!! DAY 7. Looks like another failed run. Good thing im using clones I don't plan on keeping. Using practice clones from a strain I'm culling. If there was ever such a thing as a clone Dr. I need one bad cause this is getting ridiculous.

 

[Vonkins]

Whats cleaning? Is it like jogging? Sounds like a lot of work.

The way I clean it is work

 

[GT21]

No slime, stems looks perfect, rez smells exceptionally clean but NO FUCKING ROOTS!! DAY 7. Looks like another failed run. Good thing im using clones I don't plan on keeping. Using practice clones from a strain I'm culling. If there was ever such a thing as a clone Dr. I need one bad cause this is getting ridiculous.

Just keep at it bud... youre probably 1 try away from success

 

[Vonkins]

A

Just keep at it bud... youre probably 1 try away from success

I have never failed at anything in my life that I put this much effort into. I appreciate all the suggestions but now that I look back at the thread my problem has never been diagnosed. I've had many suggestions of what to do but I haven't really had a person say "you've got so and so. I've had your exact same symptoms and this is what I did to fix it". I've tried every single thing suggested. Maybe there is no fucking answer. Maybe it's my damn air/water. I'll assume anything at this point. I know no one changes out the pipe work in their cloner. Never heard of anyone having to. Maybe a new pump, new pipework, misters, and res then I might get 1 or 2 decent runs before I'm back at this spot. I would love to give someone my cloner and 10 gallons of water from my house then see what they could do. I swear I'm jinxed at water cloning

 

[GT21]

The way I clean it is work

A

I have never failed at anything in my life that I put this much effort into. I appreciate all the suggestions but now that I look back at the thread my problem has never been diagnosed. I've had many suggestions of what to do but I haven't really had a person say "you've got so and so. I've had your exact same symptoms and this is what I did to fix it". I've tried every single thing suggested. Maybe there is no fucking answer. Maybe it's my damn air/water. I'll assume anything at this point. I know no one changes out the pipe work in their cloner. Never heard of anyone having to. Maybe a new pump, new piework, misters, and res then I might get 1 or 2 decent runs

Do you scar the bottom or just cut it?

 

[Vonkins]

I at least thought I should see signs of some problem. There r none at all. Cloner smells exceptionally clean and stems look perfect. All my stems are crimson colored but I don't think that means anything

 

[Vonkins]

Do you scar the bottom or just cut it?

Just a cut with scissors.

 

[GT21]

Just a cut with scissors.

Try a razor blade ...scrape the side of the stem underwater... then cut a 45 through that scarring underwater... put it in your juice..then in the collar and go

 

[Vonkins]

If pics is what's needed then I will take a damn pic at every angle to get some cure for this problem.