THCFarmer.com
121,258 Members Log In Register
Log In Register

Can someone please help with this deficiency

  • Thread starter Thread starter Deforced
  • Start date Start date
  • Tagged users Tagged users None

Can someone please help with this deficiency

Deforced 101 Replies 11,868 Views
Page 2 of 6 · Replies 21–40 of 102
#21
Aqua Man said:
You won’t see any other than in new growth. The damaged leaves will get worse and fall off. Not a big deal at all. New growth should look better within days of the rest of the parameters are in line
Click to expand...
That's awesome, I really am grateful for your knowledge. If I don't see improvements I will drop onto this thread again.
 
#22
Take a syringe and pull water from the bottom inch of the pot. Test you ppm and ph from there. They can be vastly different in the root zone than runoff. This will help you see and determine frequency also and give you the truth of what going on in the root zone. Do it just before feed a couple times a day until you see numbers going in and out are reasonably similar.
Then you know you have stabilized the rootzome
 
#24
I will do just that, also for ph would you let it drift from 5.8 to 6.2 in coco for keep it at 6.0?
 
#25
Deforced said:
I will do just that, also for ph would you let it drift from 5.8 to 6.2 in coco for keep it at 6.0?
Click to expand...
You can let it drift in that range. I found about 6.2 gives me some availability issues but my growth rates were pretty stupid so you may or may not experience the same. Every grow and room is different
 
#29
Deforced said:
Ph in at 5.8 and after a flood it returns at 5.9, I'm sure after every flood it goes up .1
Click to expand...
Ok source water ppm and ph?

I think I would wait to see the effects after your frequency change before adjusting unless your going to tell me something that jumps out at me.

1 change at a time and wait for results is the most effective way to dial in a grow imo.

to many changes at once can stress plants and make determining results of each change difficult
 
#30
Aqua Man said:
Ok source water ppm and ph?

I think I would wait to see the effects after your frequency change before adjusting unless your going to tell me something that jumps out at me.

1 change at a time and wait for results is the most effective way to dial in a grow imo.

to many changes at once can stress plants and make determining results of each change difficult
Click to expand...
Source ph is 7.1
Ppm is 250
I was using vitalink feed with a few grows now but I ditched that and went to canna but only canna a+b. So they say that their a and b is designed to work with 250ppm tapwater because they say that the tap water at that ppm has already enough calcium and magnesium in it. I'm trying to keep it as simple as possible really hence why I went to canna base nutes for coco so that I don't add all the other additives like I was before.
 
#31
Deforced said:
Source ph is 7.1
Ppm is 250
I was using vitalink feed with a few grows now but I ditched that and went to canna but only canna a+b. So they say that their a and b is designed to work with 250ppm tapwater because they say that the tap water at that ppm has already enough calcium and magnesium in it. I'm trying to keep it as simple as possible really hence why I went to canna base nutes for coco so that I don't add all the other additives like I was before.
Click to expand...
Yup that sounds right to me. So see how this works out and we can go from there if needed
 
#32
Aqua Man said:
Ok source water ppm and ph?

I think I would wait to see the effects after your frequency change before adjusting unless your going to tell me something that jumps out at me.

1 change at a time and wait for results is the most effective way to dial in a grow imo.

to
Click to expand...

Aqua Man said:
Yup that sounds right to me. So see how this works out and we can go from there if needed
Click to expand...
Perfect. I will attach a photo of my timer and when you say every 1 hr irrigating will that be fine because I have another dial that says how long to hold the water once the flood happens. Its a 24hr timer too
 
#33
Deforced said:
Perfect. I will attach a photo of my timer and when you say every 1 hr irrigating will that be fine because I have another dial that says how long to hold the water once the flood happens. Its a 24hr timer too
Click to expand...
Just to add I was flooding 2 times every 24hr so what shall I change it to. Thanks
 
#34
20220410 152607
 
#37
You can definitely start there and see how it goes. Lots of factors at play. Test from the syringe will tell you a lot and check the moisture level between irritation
 
#39
This article I wrote will really help you gain an understanding of what I’m saying and if you have any questions just holler

www.thcfarmer.com

Marijuana Watering, how media, pot size/shape and environment affect it

Discuss different watering methods for growing your own weed from seeds. Our community members give helpful tips on how pot size and material, as well as environmental factors affect growing cannabis.
www.thcfarmer.com www.thcfarmer.com
 
#40
Page 2 of 6 · Replies 21–40 of 102
Back
Top Bottom