Slow growth since switching to LED

  • Thread starter Weedgrower
  • Start date
  • Tagged users None
Aqua Man

Aqua Man

26,480
638
These guys weren’t big but to date was my favourite expression and was really nice smoke… a pheno from hyper blue cherry magoo. I had 2 out of how many i can’t remember… lost now 😒 but i think i may still have a few seeds i just dont know if i brought them with me in the move.

I did have a gelato that grew larger than 1 litre buds.
1652827063717
 
Shaded_One

Shaded_One

1,866
263
Hmmm. You would have to give me one so I could ummmmm inspect it more closely for larf. Yeah, that's it.
(Dude.. those are freaking beautiful!)

Thank you sir! I think I'm starting to get the Gaia Green dialed in :)

Both of those plants were seeds from a local dispensary so I was quite surprised. If you are in Canada I could send over a sample pack in a few weeks!
 
W

Weedgrower

30
18
Well the photone paid for LeD I believe works well. Some need to make a diffuser to use. None the less id hang at 75cm at 50% for now and see how they lookin a couple days… will give you a chance to practice new skills of reading light stress.

Meters are handy for replication but ince you can read the plants there is absolutely no need to use a meter unless trying to give a number to help another grower ir replication
Yeah I'll tune up my newly acquired skills, what do I look out for when there is not enough light?
 
W

Weedgrower

30
18
Photone app for the phone is a helper as you could calibrate to the manufacturer ppfd map and be closer. It’s a 7-8 dollar upgrade to get ppfd to work for full spectrum led.

I used it for a while , but being a machinist by trade a proper guage would be best to maximize efficiency.
For the price of weed at the dispensary the 400 bucks I spent is a small price to pay to know for sure what I’m applying.

Again good luck with the grow , plants look great.
Thanks buddy
 
Aqua Man

Aqua Man

26,480
638
Yeah I'll tune up my newly acquired skills, what do I look out for when there is not enough light?
Nothing cause im always walking that line after seedlings. You be surprised though how much ppl over light their plants and if you keep notes well you can see exactly if small changes are beneficial or not… the more light they tolerate the more dialed in you are. It all depends gow anal and how hard you want to push them and whether you find all the extra work to do so worth it
 
Aqua Man

Aqua Man

26,480
638
I have it on full spectrum and it says 300 lol. No way we get 🌮 at 300 right?
Yup you can but like i say you do want a slight V to the upper 3 or so nodes. It will be most pronounced at the top. Your not far off your optimal and i think about 75cm at 50% should put you there. Then get plant temps on the proper range as thats a huge guge factor in growth rates…. Id say even comparable to co2 depending how far out you are
 
Heywood

Heywood

600
143
I have it on full spectrum and it says 300 lol. No way we get 🌮 at 300 right?

Keep in mind it is a free (Android) phone App and not an Apogee meter. 😉
To me, it is just more of a novelty/reference App.

Now I just read the leaves. As long as they are at least flat, better yet to a slight "V"... then I am in the right ballpark.
If we are at full taco, there's a problem.

This is the right ballpark for me... lightly praying upwards and slight V on most of them on my Blueberry Muffins.

Slight v
 
Last edited:
Smokey0418

Smokey0418

613
143
Just to clarify...
Full spectrum LED is unlocked from the start on Android. On iPhone you have to pay.
Surprises me that they would give out the ppfd on android for free.
Must have been an oversight on there end and monies lost.
Good for you.
 
Aqua Man

Aqua Man

26,480
638
If the light is right, your feed it’s too much if you taco.
There can be many reasons why the plants may not be able to handle a certain light intensity but the tacoing from heat and light stress is always a response to too much light/heat for the plant. Factors like genetics, nutrients, ph, temp, humidity, wind, co2, o2 etc etc etc will reduce the efficiency of photosynthetic rates. In all cases resuce light until its is corrected.

Pretty much the only hard rule i can think of when it comes to cannabis. No matter the issue reduce light until corrected.

Now there is an influence we havent yet discussed that and thats very high transpiration rates make the plants more turgid and the V shape may be slightly more pronounced but thats a good thing. So as i say a slight V is good but folded like a taco is too much. You get the feel for it pretty quickly once you pay attention
 
Tasty Buds

Tasty Buds

1,653
263
I think it has something to do with the lack of IR light. Does anyone have any pics of LED with IR strip?
This was my most recent grow under a 600 hps. Until I see it, I have a real hard time believing it. Not fighting words, just my experience, and my opinion.
20220517 174504
20220517 174756
 
Heywood

Heywood

600
143
Surprises me that they would give out the ppfd on android for free.
Must have been an oversight on there end and monies lost.
Good for you.
I downloaded this from the Playstore... 3 or 4 weeks ago I guess... It's a Photone beta version and everything is unlocked.
 
Aqua Man

Aqua Man

26,480
638
May aswell explain the glheat aigns a bit also. Early mag deficiency can be mistaken for heat but when the serrations are spiked its usually a sign if heat stress and stress reduces light tolerance so when combined with folding is most often the heat causing light stress. Tgis happens fairly quickly once leaf/plant temps hit 78-82 depending on the genetics. Heat atress is almost always accompanied by light stress.

If the edges are rolled inwards and not folded then start looking for bugs… more specifically russet or spider mites.

Tips curled down N tox.

Tips bleached/burned and upwards start of light burn or potassium deficiency often seen in later flower when demand for K is high.

Now understand that all of these are symptoms of and rarely the cause…. Eg potassium scorched tips and serrations does not mean you need more potassium and likely its an availability issue like PH , nutrient ratio or transpiration.


Figured since we’re are going deep on leaf signs i add some to it.
 
Tasty Buds

Tasty Buds

1,653
263
May aswell explain the glheat aigns a bit also. Early mag deficiency can be mistaken for heat but when the serrations are spiked its usually a sign if heat stress and stress reduces light tolerance so when combined with folding is most often the heat causing light stress. Tgis happens fairly quickly once leaf/plant temps hit 78-82 depending on the genetics. Heat atress is almost always accompanied by light stress.

If the edges are rolled inwards and not folded then start looking for bugs… more specifically russet or spider mites.

Tips curled down N tox.

Tips bleached/burned and upwards start of light burn or potassium deficiency often seen in later flower when demand for K is high.

Now understand that all of these are symptoms of and rarely the cause…. Eg potassium scorched tips and serrations does not mean you need more potassium and likely its an availability issue like PH , nutrient ratio or transpiration.


Figured since we’re are going deep on leaf signs i add some to it.
I need to go back, and read a whole bunch of your threads. If anyone could help me "get it", you seem like the guy with knowledge I do not have
 
Aqua Man

Aqua Man

26,480
638
I think it has something to do with the lack of IR light. Does anyone have any pics of LED with IR strip?
This was my most recent grow under a 600 hps. Until I see it, I have a real hard time believing it. Not fighting words, just my experience, and my opinion. View attachment 1245906View attachment 1245905
This was cooked to shit under a 600w led run at about 480w i had issues trying to keep that plant happy because it did not like the same light, nutrient ratio etc as the majority i was growing with it… but because of genetics it still hauled ass in comparison on the bid size… it’s mostly genetics that determine tgis and if the plant is topped.

1652836531360
 
Aqua Man

Aqua Man

26,480
638
I need to go back, and read a whole bunch of your threads. If anyone could help me "get it", you seem like the guy with knowledge I do not have
Dude i seen you stuff around im not to sure i can help you much with knowledge . About the only things i can say is LED changes almost all ideals when swapping from HID i think most feel they are just a different source of lights but they really change the needs if the entire grow and many get frustrated when switch and go back
 
Aqua Man

Aqua Man

26,480
638
This was cooked to shit under a 600w led run at about 480w i had issues trying to keep that plant happy because it did not like the same light, nutrient ratio etc as the majority i was growing with it… but because of genetics it still hauled ass in comparison on the bid size… it’s mostly genetics that determine tgis and if the plant is topped.

View attachment 1245907
This pic is so embarrassing lol but hey i dont mind showing the good and the bad… you dont learn from perfection and i done a fair bit of learning lol
 
Tasty Buds

Tasty Buds

1,653
263
Dude i seen you stuff around im not to sure i can help you much with knowledge . About the only things i can say is LED changes almost all ideals when swapping from HID i think most feel they are just a different source of lights but they really change the needs if the entire grow and many get frustrated when switch and go back
This was cooked to shit under a 600w led run at about 480w i had issues trying to keep that plant happy because it did not like the same light, nutrient ratio etc as the majority i was growing with it… but because of genetics it still hauled ass in comparison on the bid size… it’s mostly genetics that determine tgis and if the plant is topped.

View attachment 1245907
I think you nailed it with that post. That's the 1st time I saw the LED potential. Great post.
 
Top Bottom