desperately In need of advice!

[GNick55]

Lol. Heard. Don't mess the guy in control of the ban hammer.

Good luck with your grow @aeyob.
Y'all be well and happy growing. )

ya and who are you?
this is your first post and this is your comment??.

 

[ayeob]

Morning everyone, here are some photos from the morning. i watered her yesterday morning with the new measurements. she looks like she’s thriving! the buds seem to be getting bigger. she’s is starting to get trichomes around the leaves!

 

[Goodshit97]

Morning everyone, here are some photos from the morning. i watered her yesterday morning with the new measurements. she looks like she’s thriving! the buds seem to be getting bigger. she’s is starting to get trichomes around the leaves!

Looks like she might be starting to improve color.

 

[ayeob]

i thought so too! she’s still a little light green but not as much as the past weeks.

 

[Goodshit97]

i thought so too! she’s still a little light green but not as much as the past weeks.

Keep on that feeding schedule @GNick55 and i threw together for ya. Seems to be helping

 

[Mikedin]

Keep on that feeding schedule @GNick55 and i threw together for ya. Seems to be helping

She’s definitely looking better! As long as he keeps with that schedule should be good

 

[ayeob]

She’s definitely looking better! As long as he keeps with that schedule should be good

yeah definitely wrote down the newest one that was given which was
big bloom 10-30 ml..
grow big 5 ml
tiger bloom 7 ml

i used about 20ml of big bloom

 

[Zen_Seeker]

So i had this happen as well when i first started growing. I ended up buying a 4 inch raxial booster fan from ac infinity to have as a backup if any fans go down again. They are 30 dollars. Its not great, but definitely helps in a situation like this, it worked in a 3x3 so it should work in a 2x4, 2x2, 2.3x2.3, i just wouldnt use it in anything bigger than 3x3.

RAXIAL S4, Inline Booster Duct Fan with Speed Controller, 4-Inch

Your source to create smart growing systems with components including advance grow tents, inline fans, clip-on fans, LED grow lights, and UIS™ controllers.

acinfinity.com

I used one 6” for like $50CND in the top duct vent hole for my first grow. Worked okay if I was home to adjust as needed.

Later got a second 6” to put in the intake vent left on low, worked even better.

For Christmas I got the ACI 6” main fan with 67 controller. Now I have a spare 6” inline for the new tent and Temp & RH pretty much stays in the zone I need. Not perfect, but good.

On sale $175CND

AC Infinity Cloudline T6 6" Inline Fan with Controller 67

Includes Controller 6730% OFF ALL T-SERIES AC INFINITY WITH CONTROLLER 67 Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system. Mixed...

astralgrow.com

 

[ayeob]

I used one 6” for like $50CND in the top duct vent hole for my first grow. Worked okay if I was home to adjust as needed.

Later got a second 6” to put in the intake vent left on low, worked even better.

For Christmas I got the ACI 6” main fan with 67 controller. Now I have a spare 6” inline for the new tent and Temp & RH pretty much stays in the zone I need. Not perfect, but good.

On sale $175CND

AC Infinity Cloudline T6 6" Inline Fan with Controller 67

Includes Controller 6730% OFF ALL T-SERIES AC INFINITY WITH CONTROLLER 67 Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system. Mixed...

astralgrow.com

yeah i definitely want to get all the AC infinity gear. makes things very convenient that it’s all in one place. i just had a cheap in-line fan which was probably why it went out on me lol

 

[Zen_Seeker]

yeah i definitely want to get all the AC infinity gear. makes things very convenient that it’s all in one place. i just had a cheap in-line fan which was probably why it went out on me lol

6” is bigger than I need in a 3x3 but it should last much longer as it doesn’t work as hard. And I can use it to do more if needed. (I have a 3 in 1 tent.)

 

[ayeob]

yeah that’s good my tent is tall and long the width i think is 2ft i think? this is the one i have

 

[BigBlonde]

yeah that’s good my tent is tall and long the width i think is 2ft i think? this is the one i have

I'm currently using an ACI 642 with a Controller 69 Pro and a 6-inch in-line fan. I am third in line to receive a T3 humidifier that I ordered last November. I also have two Control Plugs to operate other devices, like a heater.

 

[Edinburg]

All I grow are autoflowers and by this point you should be feeding, I recommend Botanacare pro grow bc it's just fish mulch and nitro 60ml per USgal, water, drain, fill a 16oz cup of water and add a small amount to cup and feed them, get a pH meter and check the run off when you drain as it's very important that you use clay pebbles for good drainage, you want to shoot for 6.2 but 6.0 to 6.5 your ok but not perfect, when there done with there stretch and in full flower I give a light flush check ph and I use Atami Bloombastic same drill but only use 30ml per USgal as if you use to much you will fry your plant, I keep it very simple bc autoflowers hate stress, make shure you have good airflow, you can buy a cheap battery powered ph meter on line, you will ALLSO need a good glass or jeweler's loupe, remember go light on nutes but I start to feed lightly at 21 days or 3 sets of leaves so I do think your plants need some food or nitro bc there drooping, don't get discouraged folk think weed is easy to grow and it is, but you need to grow properly or all you will have are sick plants, chopped this critical mass plant yesterday but am having problems finishing up a chem stomper as the pH is all over the place but it's an F1 and has been giveing me grief since the rip, it will finish in the end and now I'm going to try some new breeder from Maine called Wicked Pissah my cousin sent me called cherry pebbles. Pic 1 critical mass pic 2 the bottom half of chem stomper the leaves yellowed a bit bc I have been having trouble keeping ph straight and drainage bc sometimes the roots wrap around the clay or it's just not completely stable as is an F1 tester.

 

[Zen_Seeker]

I'm currently using an ACI 642 with a Controller 69 Pro and a 6-inch in-line fan. I am third in line to receive a T3 humidifier that I ordered last November. I also have two Control Plugs to operate other devices, like a heater.

Ya the 67 only has 2 connection ports but the 69 has 4 I think. Overkill for me ATM but future proof if you need it.

 

[Zen_Seeker]

yeah that’s good my tent is tall and long the width i think is 2ft i think? this is the one i have

Unless you have bigger plans in the not to far future 4” should be more than good.

Clean and use the old small inline fan as your intake. I found the sleeves strong enough to hold the fan. I put a string and clip on it just in case. It also acts as a fan for the bottom of the tent area. So roots, soil & leaves get air as well.

 

[Toohighmyguy]

yeah i definitely want to get all the AC infinity gear. makes things very convenient that it’s all in one place. i just had a cheap in-line fan which was probably why it went out on me lol

Only been running AC a couple years. Along new LEDs. I give two thumbs up to AC. No doubt it has been a very good brand. I would also recommend. Just a short timer with their equipment, but thoroughly empressed. Love and happiness. Peace

 

[ayeob]

I'm currently using an ACI 642 with a Controller 69 Pro and a 6-inch in-line fan. I am third in line to receive a T3 humidifier that I ordered last November. I also have two Control Plugs to operate other devices, like a heater.

yeah i have a couple smart plug too for things. what kind of light do you use

 

[ayeob]

Unless you have bigger plans in the not to far future 4” should be more than good.

Clean and use the old small inline fan as your intake. I found the sleeves strong enough to hold the fan. I put a string and clip on it just in case. It also acts as a fan for the bottom of the tent area. So roots, soil & leaves get air as well.

yeah once i’m able to might get another i line fan. although my system works now so might not have to change it

 

[BigBlonde]

Ya the 67 only has 2 connection ports but the 69 has 4 I think. Overkill for me ATM but future proof if you need it.

Yes. The 69 has four ports. They used to have a device that could expand a port to two or four additional ports. They pulled it from the market, though. I asked about it and they said they're redesigning it. So we should see that again eventually.

Right now, I'm only using one port. I expect to use them all eventually. My grow is in the final stages of flowering, so I don't want to make any big changes now. I have a control plug to use with the heater and humidifier should arrive eventually.

Something I really like about the Controller 69 is that it calculates VPD in real time.

 

[Toohighmyguy]

All I grow are autoflowers and by this point you should be feeding, I recommend Botanacare pro grow bc it's just fish mulch and nitro 60ml per USgal, water, drain, fill a 16oz cup of water and add a small amount to cup and feed them, get a pH meter and check the run off when you drain as it's very important that you use clay pebbles for good drainage, you want to shoot for 6.2 but 6.0 to 6.5 your ok but not perfect, when there done with there stretch and in full flower I give a light flush check ph and I use Atami Bloombastic same drill but only use 30ml per USgal as if you use to much you will fry your plant, I keep it very simple bc autoflowers hate stress, make shure you have good airflow, you can buy a cheap battery powered ph meter on line, you will ALLSO need a good glass or jeweler's loupe, remember go light on nutes but I start to feed lightly at 21 days or 3 sets of leaves so I do think your plants need some food or nitro bc there drooping, don't get discouraged folk think weed is easy to grow and it is, but you need to grow properly or all you will have are sick plants, chopped this critical mass plant yesterday but am having problems finishing up a chem stomper as the pH is all over the place but it's an F1 and has been giveing me grief since the rip, it will finish in the end and now I'm going to try some new breeder from Maine called Wicked Pissah my cousin sent me called cherry pebbles. Pic 1 critical mass pic 2 the bottom half of chem stomper the leaves yellowed a bit bc I have been having trouble keeping ph straight and drainage bc sometimes the roots wrap around the clay or it's just not completely stable as is an F1 tester.

Hey brother love what your doing. Meticulous. Don't over work yourself. Every lady is different. Never ran an oto. From what I here is their not not very nutrient needy. But then girls are definitely lacking nutrition. Take this with a grain of salt. If you run the same strain you will understand her. Run different stains, you're in a different world. Nothing but respect. One love