mello
- 107
- 43
Hey Farm Friends,
Decided to restart this thread with a title that would actually attract some attention. We're hoping to get some input on a variety of undetermined details.
Been working hard for a long time. We're now finally putting together the kind of space we've been talking about for years. Let me tell you all a little more....
First off let me state that we are in a mmj friendly state. This is a LEGAL cooperative grow, and we are closely following strict state guidelines.
Anyways, we started with about 3,000 ft2. A concrete shell. Stand alone building.
Our design consists of one 14'x24' veg room with 8400 watts (6 x 1000's and 4 x 600's) and some t5's for baby girls. This will be feeding three 16'x24' flower rooms with 12 x 1000's each. Additionally we have a drying/curing room, a centralized and spacious work area, a garage, a res/nutes/storage room, an office, a shitter, and we're adding a shower.
All grow areas will be sealed tight. Each flower room will have 5 ton's of AC and the veg room will have 4 tons. CO2 burning everywhere.
A couple flicks to show the progress:
The floor plan we're going with:
Roof penetrations for AC units:
Veg, dry, and work zones framed up:
Flower 1,2, and 3 framed up:
So that's the progress as of now. We're on the verge of completing the service upgrade to 400 amps. AC units get dropped in a couple days. Then insulation and drywalling. After that we'll start putting the rooms together.
Each flower room will have four 4'x12' tables on castors with 3k over each table. Each table will hold 10 plants. Will be doing one room in 7 gal's coco blend. One room will most likely be soil. And one will be Hater Buckets x chow mix (shout out to the man Dankworth!)
Been using Soul Synthetics nutes for a while and been very happy with the results. Will definitely be running that in at least one room. Hater Buckets will be getting the custom salts mix. Might even get dumb and give Aptus a run. All will be getting Cap's bennie's. Duh.
Plenty of details are undetermined at this point and we're posting in hopes of getting good ideas from you fellow Farmers.
Some of the questions that are unanswered are what hoods to use. We've been on Magnum's for a while and have been very happy with em. Been hearing good things about Adjust-a-Wings and Luxor's. Also the Growlite OG Verticals. Would love to hear opinions from those with experience.
Still haven't settled on what kind of watering system will be used. I've liked hand watering as it's the safest method. It also forces regular one on one contact with each plant. And some of our members need that;) But at the very least the Hater Buckets will need to be automated.
Fack, there's plenty more that I'm hoping to discuss with you guys but I've gotta run for now.
Cheers to you all.
Decided to restart this thread with a title that would actually attract some attention. We're hoping to get some input on a variety of undetermined details.
Been working hard for a long time. We're now finally putting together the kind of space we've been talking about for years. Let me tell you all a little more....
First off let me state that we are in a mmj friendly state. This is a LEGAL cooperative grow, and we are closely following strict state guidelines.
Anyways, we started with about 3,000 ft2. A concrete shell. Stand alone building.
Our design consists of one 14'x24' veg room with 8400 watts (6 x 1000's and 4 x 600's) and some t5's for baby girls. This will be feeding three 16'x24' flower rooms with 12 x 1000's each. Additionally we have a drying/curing room, a centralized and spacious work area, a garage, a res/nutes/storage room, an office, a shitter, and we're adding a shower.
All grow areas will be sealed tight. Each flower room will have 5 ton's of AC and the veg room will have 4 tons. CO2 burning everywhere.
A couple flicks to show the progress:
The floor plan we're going with:
Roof penetrations for AC units:
So that's the progress as of now. We're on the verge of completing the service upgrade to 400 amps. AC units get dropped in a couple days. Then insulation and drywalling. After that we'll start putting the rooms together.
Each flower room will have four 4'x12' tables on castors with 3k over each table. Each table will hold 10 plants. Will be doing one room in 7 gal's coco blend. One room will most likely be soil. And one will be Hater Buckets x chow mix (shout out to the man Dankworth!)
Been using Soul Synthetics nutes for a while and been very happy with the results. Will definitely be running that in at least one room. Hater Buckets will be getting the custom salts mix. Might even get dumb and give Aptus a run. All will be getting Cap's bennie's. Duh.
Plenty of details are undetermined at this point and we're posting in hopes of getting good ideas from you fellow Farmers.
Some of the questions that are unanswered are what hoods to use. We've been on Magnum's for a while and have been very happy with em. Been hearing good things about Adjust-a-Wings and Luxor's. Also the Growlite OG Verticals. Would love to hear opinions from those with experience.
Still haven't settled on what kind of watering system will be used. I've liked hand watering as it's the safest method. It also forces regular one on one contact with each plant. And some of our members need that;) But at the very least the Hater Buckets will need to be automated.
Fack, there's plenty more that I'm hoping to discuss with you guys but I've gotta run for now.
Cheers to you all.