Thanks for all the love fam! Ya'all rock!
Sweetleaf you can up the ppfd and push harder is you want. She can take it.
I’d love to know what your brix is at.
Thanks Moe, I have slowly been cranking up the light and am now at 100%. I have to be honest and say I had to look up brix and what that is all about. I will have to get one of those meters for my tool box and I remember someone here talking about a garlic press too. Imma gonna get there with all the tools one day!
I’d like to see a higher temp for better photosynthesis .that way he could push more ppfd.
Same here Max, I have been able to get things up to 77F in that tent, sitting at 47% RH and running a humidifier and extra heat, but that is only because we are not having the -20F temps outside at the moment. Those temps are brutal, especially for this room that is blocked off from the rest of the house because of the remodeling project. Once that is finished, it will be easier, but still difficult when we see -20 all the way down to -60F temps during our winters.
Without CO2 best temp for this plant right now is about 78F. Rh should then be 50 -55%
I'm pretty close to this at the moment.
I’m trying to break him in gently. Continuous positive pressure to snip. Once you do it right and see the results you will never be afraid to snip again.
I had to laugh at this one, I am getting there
I couldn't find it, but didnt look to hard either. What light u using again and how big was that tent?
Thanks bro - I'm using the
Spider Farmer SE 3000 in a 3x3.
Now let’s say you have not fed in a week and you are at 400 ppm.
If you change out no water and want to maintain the same ratio this week you add 100ml of each of the 4.
You will be roughly right.
Thanks for all this great information Moe! So I get all that, pretty straightforward. I understand that inevitably the plant will drink water, although I have noticed that all this defoliation has slowed that down, I have replaced about 1.5 - 2 gallons over the last week since the res change. Whether or not I added back in water, I still see what you are saying...adding back in the same proportions is going to keep that ratio between the three formulas the same. Adding more RO water will just bring down the total ppm but not change the ratios.
Now from what I understand, the needs of this plant will be changing week by week and I need to adjust those ratios accordingly. Week 4 will be starting very soon. I want to try to amend this res without changing it out. So given what you have said here Moe, would it be a simple matter of calculating the ratios from the GH feeding chart from the 1:1:1 that I mixed originally, to a ratio reflecting the numbers in the GH chart for week 4? and then adding back in those amounts of nutrients to get to that final week 4 target ppm? I'm not a math wiz but I am going to play around and then post what I come up with, see what you think.
Thanks again fam for all the help and encouragement!