Moe.Red
- 5,044
- 313
Yeah. Stood inside the grow room for a bit to warm up. All good. Nice down there. The shop part of the basement is 50* tho. Found all the places that need to be caulkedyou been down to have a look yet Moe..
Yeah. Stood inside the grow room for a bit to warm up. All good. Nice down there. The shop part of the basement is 50* tho. Found all the places that need to be caulkedyou been down to have a look yet Moe..
I'll show you a complete setup in a few hours. I think it will make sense. Solves 4 separate problems.Fits like a glove Moe.wish I had your brains bud..how can you b soo brainy and smoke .what’s the half printed ones..
Yesssss. Someone else who uses this phrase lmao.drain bramage
Do these printers stand alone? Just plug a drive to and go? I'd love to get one but printing lst clips for me might be overkill.Progress printing finalized parts now.
View attachment 1320325
View attachment 1320326
View attachment 1320327
Really looking forward to the next phase.
I'm with you. They are just too cool. As for things like LST clips, they are a cakewalk for these. My next door neighbor came over and he has a printer. I told him I was going to buy some clips offline and he used my computet, found a file and emailed to himself, and hours later brought me a bunch of them. Another friend in Havasu City sent me some seeds and also clips he made with his printer. They are perfect and my advice once/if make them is smaller and lighter the betterDo these printers stand alone? Just plug a drive to and go? I'd love to get one but printing lst clips for me might be overkill.
Have you looked at the resin style? Any advantages or disadvantages?
Hell yea.....amazing.Printing production parts and upgrading. Once all the blue is gone I’m in business. Then 7 more sets to get started.
If you are looking for a cheap standalone the Ender series is a good place to start. It will allow you to download designs from places like thingiverse and print them yourself scaled to whatever size you want.Do these printers stand alone? Just plug a drive to and go? I'd love to get one but printing lst clips for me might be overkill.
Have you looked at the resin style? Any advantages or disadvantages?
I'm with you. They are just too cool. As for things like LST clips, they are a cakewalk for these. My next door neighbor came over and he has a printer. I told him I was going to buy some clips offline and he used my computet, found a file and emailed to himself, and hours later brought me a bunch of them. Another friend in Havasu City sent me some seeds and also clips he made with his printer. They are perfect and my advice once/if make them is smaller and lighter the better
That is actually my drying racks. That's for the standard slow dry --> Cure --> Smoke flower process.Is that a freeze dryer? Nice man. I want to do a dyi ph controller next.
Hooooleee shit Moe. Wow just that is incredibly brilliant, off the charts generous, and downright fkin awesome. Sign me the heck up man. Anyone who thinks this isn't the best CannaCommunity on the web is a cheat, fraud, and a liarIf you are looking for a cheap standalone the Ender series is a good place to start. It will allow you to download designs from places like thingiverse and print them yourself scaled to whatever size you want.
If you want to make your own deigns, you will need a CAD program of some sort. Anything that you can design in that produces .STL or .3MF files will work. I use a $60/mo software called Fusion 360, but I use it for work too which justifies the cost. I run milling machines and plotters and laser cutters and crap like that off this software too. Probably not worth it to just tinker with, there are free ones out there.
I've looked into all of them, including selling the big ones based on powder at my work. Places like Boeing and Nike use them. Full color. For my needs - the kind of stuff you see on this thread PETG is the material I want to use, so these are the appropriate printers. I wish I knew how many total hours I have printed at this point, but I'll bet it's in the 20,000 range. PETG is the stuff they make milk cartons out of so completely safe.
I suppose I haven't said this out loud, but It's my intention to have an online shop for 3D printed parts at some point in the not too distant future. Take all these hundreds of designs and put them up for sale custom made, meaning you choose the color and I'll print and send to you. I'll also share the STL files there if you have your own printer - so open source this stuff. But if you just want the damn part without all the BS, I'll print it for you at guaranteed quality. If you have a design you want to send me and I think it is a worthwhile part, send it to me even a picture of a drawing on a napkin, and if I end up doing it I'll send you the prototype parts as a thank you. Then throw that design on the store too.
Imagine all the cool shit we could make together as a community.
I'll also be looking to collaborate in some way with the community on the electronics. Example if you want to build one of my controllers, I can send you a kit with the printed parts, circuit boards, etc with a pre-flashed OS on a SD card, and you can do the same crap as me. I'm going to open source the hardware part of the system with downloadable code for your microcontroller.
Same for PH controller, CO2 controller, Fog controller, yada yada yada.
All this stuff will be made in such a way to link with and support @Aqua Man in his efforts with the OxyGen.
Took a bit of a nutshot there boys back in Oct - Dec of last year, but I'm thinkin' I'm back. Time to get to work.
Speaking of which, time to get back to this harvest. Here's a little Hells Angles OG x Chem. My whole block knows I'm harvesting, I'm certain. Powerful stink.
Whelp now I see the problem yall have super cool toys and I'm using a hand me down mini wine fridgeThat is actually my drying racks. That's for the standard slow dry --> Cure --> Smoke flower process.
The Freeze Dryer is down here
View attachment 1320432
I will be using the freeze dryer for part of this harvest but right now working on testing grove bags vs my standard glass cure to see what’s up with those bags.
You are in Arizona right? This seems like a perfect way to do it in that climate to me. I’d have done the same thing if I could control myself brother. I go overkill on everything way beyond what’s needed. I built my curing and extraction systems to handle 4 pounds a month. Built it so I could do that by myself in perpetuity if I ever decided to retire.Whelp now I see the problem yall have super cool toys and I'm using a hand me down mini wine fridge
Yeah Scottsdale and the best herb I grew and dried has come from this wine fridge. It was free so I said shit why not try. It is a 2-4oz tops cap. but the ease of maintaining temp at 60 I simply can't achieve currently using anything else. If the RH goes above 60 I crack door. It really slows things down and I guess that is the goal. It is too small to deal with the high RH the plants give off the 1st day or 2 but after that I have been using it with success. I had some points on amzn and just bought a 3 pack of govee bluetooth hygrometers that arrived. Thinkin of goin a bit yolo next grow with various cultivars and I can't imagine they won't all be finishing at different times. Wish I could borrow your brain and abilities to diy a fridge I have in the garage into a dry chamber. I saw my neighbor had it in her garage and wasn't going to use. When came time for her to ditch it I put it in mine. Now I have to figure out the DIY partYou are in Arizona right? This seems like a perfect way to do it in that climate to me. I’d have done the same thing if I could control myself brother. I go overkill on everything way beyond what’s needed. I built my curing and extraction systems to handle 4 pounds a month. Built it so I could do that by myself in perpetuity if I ever decided to retire.
What’s your question on the diy? How to manage Rh?Yeah Scottsdale and the best herb I grew and dried has come from this wine fridge. It was free so I said shit why not try. It is a 2-4oz tops cap. but the ease of maintaining temp at 60 I simply can't achieve currently using anything else. If the RH goes above 60 I crack door. It really slows things down and I guess that is the goal. It is too small to deal with the high RH the plants give off the 1st day or 2 but after that I have been using it with success. I had some points on amzn and just bought a 3 pack of govee bluetooth hygrometers that arrived. Thinkin of goin a bit yolo next grow with various cultivars and I can't imagine they won't all be finishing at different times. Wish I could borrow your brain and abilities to diy a fridge I have in the garage into a dry chamber. I saw my neighbor had it in her garage and wasn't going to use. When came time for her to ditch it I put it in mine. Now I have to figure out the DIY part
What’s your question on the diy? How to manage Rh?