Gorilla Bomb

EventHorizan · May 5, 2017

Stoney M said:
View attachment 697701 Bubble Haze is a winner. Size of these heads.

oh ya your way up into that light!!!! Those heads are swolled like that because of elongation from the heat stress. It does that to cool the bud in high temps. It also degrades the tricomes, which in turn reduces potency. When it dries it will even more noticeable... my first 3 grows was exactly like that and i even have 1 or 2 tops now that have some heat stress, that are right under the light. I run open reflectors just like yours too, so we really have to pay attention... what is your total max height you have to work with.
from floor to light i have 5' not a lot...

Stoney M · May 5, 2017

EventHorizan said:
oh ya your way up into that light!!!! Those heads are swolled like that because of elongation from the heat stress. It does that to cool the bud in high temps. It also degrades the tricomes, which in turn reduces potency. When it dries it will even more noticeable... my first 3 grows was exactly like that and i even have 1 or 2 tops now that have some heat stress, that are right under the light. I run open reflectors just like yours too, so we really have to pay attention... what is your total max height you have to work with.
from floor to light i have 5' not a lot...

I had extreme RH at night for a couple weeks in the first 2 weeks of flower. Tent wasn't dialled in properly. Before the lights turned on at midnight it was drawing in so much cold air I had to manually work on the in and out switch it on for 15 off for 45 and so on till a timer arrived. That for sure is why they stretched further than I wanted. Tent size is 1.2 x 2 x 2. And the bubble Haze has almost reached 5"10" lol

Stoney M · May 5, 2017

Stoney M said:
I had extreme RH at night for a couple weeks in the first 2 weeks of flower. Tent wasn't dialled in properly. Before the lights turned on at midnight it was drawing in so much cold air I had to manually work on the in and out switch it on for 15 off for 45 and so on till a timer arrived. That for sure is why they stretched further than I wanted. Tent size is 1.2 x 2 x 2. And the bubble Haze has almost reached 5"10" lol

It was hitting 90+% RH and even maxed out at one point

EventHorizan · May 5, 2017

Stoney M said:
I had extreme RH at night for a couple weeks in the first 2 weeks of flower. Tent wasn't dialled in properly. Before the lights turned on at midnight it was drawing in so much cold air I had to manually work on the in and out switch it on for 15 off for 45 and so on till a timer arrived. That for sure is why they stretched further than I wanted. Tent size is 1.2 x 2 x 2. And the bubble Haze has almost reached 5"10" lol

and you couldnt turn off the fan are the rh would rise right? Ya you need a dehuey, which will also heat up your tent when lights are out! But that fox tailing isnt from rh, its from temps at canopy level, and the only way you are gonna deal with that, is to keep lights 18 - 24 inches away from the top of canopy... so lsting, scrogging, is usually your only tool, and GOOD GENETICS...
Well im jumping on a train here in a few hrs and taking a mini trip for the night so hopefully this train has wifi like it said it would!

Stoney M · May 5, 2017

Yes that makes total sense to me, thanks bro. Something I've been working on with new Secret Jardin fans recently purchased to help combat the heat issue around the canopy. Just seemed to be a hotspot in the corner where this plant is situated. And I only clocked yesterday the extraction is about 140 m2 ph short of the tents target rate... Damn
I thought a 6" would be too much tbh, that would need a high power 5" or slightly less powerful 6" intake :/

https://www.ebay.co.uk/itm/112362905687

EventHorizan · May 5, 2017

Stoney M said:
Yes that makes total sense to me, thanks bro. Something I've been working on with new Secret Jardin fans recently purchased to help combat the heat issue around the canopy. Just seemed to be a hotspot in the corner where this plant is situated. And I only clocked yesterday the extraction is about 140 m2 ph short of the tents target rate... Damn
I thought a 6" would be too much tbh, that would need a high power 5" or slightly less powerful 6" intake :/

https://www.ebay.co.uk/itm/112362905687

u need a min of a 440 cfm extraction fan, and just open the vents at the bottom of the tent. what room is your tent in? is there a window in there? is that room enclosed?

Stoney M · May 5, 2017

EventHorizan said:
u need a min of a 440 cfm extraction fan, and just open the vents at the bottom of the tent. what room is your tent in? is there a window in there? is that room enclosed?

Tents in our main bedroom next to me like a huge wardrobe. Windows always open to regulate my mother and cutting section. That's just pulling air through the bottom of the tent . . I've been in their for over 90 mins adjusting air flow and I've got it between 77* and 78* all round. Took a bit of time probe every sq ft of the tent but worth it.

Stoney M · May 5, 2017

EventHorizan said:
u need a min of a 440 cfm extraction fan, and just open the vents at the bottom of the tent. what room is your tent in? is there a window in there? is that room enclosed?

Intake is 4" 350+ m2 and out is around the 440 m2 5" can fan. I lengthened the intake as smell was slightly leaking. I added more ducting to where it was sucking from. That's seemed to have done the trick. May need to upgrade to a 600mm long filter rather than the 450mm

EventHorizan · May 5, 2017

Stoney M said:
Windows always open to regulate my mother and cutting section.

what do u mean regulate it... guess im not following? we

Stoney M said:
Intake is 4" 350+ m2 and out is around the 440 m2. I lengthened the intake as smell was slightly leaking. I added more ducting to where it was sucking from. That's seemed to have done the trick. May need to upgrade to a 600mm long filter rather than the 450mm

the only real place you need to probe temp is directly under light 3 inches above canopy... thats the temp u need to be concerned with..

Stoney M · May 6, 2017

Regulate to keep air flowing through. (Mother tent only has a low power 4 inch inline pulling air into it via carbon filter.
3 inches above canopy. (That's above the tent for a couple plants) I'll be a lot happier working from clones next time round. Seeds seem to shoot up too much and become a bit stemmy and elongated. :(

Stoney M · May 6, 2017

Stoney M said:
Regulate to keep air flowing through. (Mother tent only has a low power 4 inch inline pulling air into it via carbon filter.
3 inches above canopy. (That's above the tent for a couple plants) I'll be a lot happier working from clones next time round. Seeds seem to shoot up too much and become a bit stemmy and elongated. :(

Thanks for your advice though :) I think I left them too long to veg, not knowing how they'd perform compared to the cheese I'm used too.

EventHorizan · May 7, 2017

Stoney M said:
Thanks for your advice though :) I think I left them too long to veg, not knowing how they'd perform compared to the cheese I'm used too.

That is why every grow we get better, because we notice more and more stuff each time... And your welcome... Some ppl i like helping, others not so much... Im a boss at work, and its the same way... Usually it depends on weather they want to hear what they did wrong or not,,,

Stoney M · May 9, 2017

I think we're almost ready :))

Stoney M · May 9, 2017

Few more shots from tonight.
66 days into flower. Sunday is officially 10 weeks 2 days then in the dark for 72 hours. Fingers crossed

jeffsciv23 · May 12, 2017

wow man, those are some nice dense buds. i just dried a few plants i had going and they were alot of airy popcorn. i think i need to do some more reading on what im doing wrong lol

Stoney M · May 13, 2017

03:43 am shots on test Bud drying

Estelombo · May 14, 2017

Awesome!!! I have 4 going into week 8 of flower this week. Gave them last feed today, starting flush now

Stoney M · May 14, 2017

Estelombo said:
Awesome!!! I have 4 going into week 8 of flower this week. Gave them last feed today, starting flush now

10 weeks 2 days officially. 9-10 weeks on the packet

Stoney M · May 23, 2017

Few harvest pics hanging to dry.

Gorilla bomb

Stoney M · May 23, 2017

Few pics of the bubble cheese!

Gorilla Bomb

Gorilla Bomb

EventHorizan

Stoney M

Stoney M

EventHorizan

Stoney M

EventHorizan

Stoney M

Stoney M

EventHorizan

Stoney M

Stoney M

EventHorizan

Stoney M

Stoney M

jeffsciv23

Stoney M

Estelombo

Stoney M

Stoney M

Attachments

Stoney M

Privacy & Transparency

Privacy & Transparency