THCFarmer.com
121,130 Members Log In Register
Log In Register

Grow Room Electrical

  • Thread starter Thread starter hiboy
  • Start date Start date
  • Tagged users Tagged users None

Grow Room Electrical

hiboy 1,406 Replies 323,603 Views
Page 50 of 71 · Replies 981–1,000 of 1,407
#981
I am not worried about anything other than making sure i am using the proper methods to run these 600's (extension cords that can withstand 600 mag ballasts) and 400's. When i bought them i just went out, bought a ext cord with a man clock timer and plugged and played! Never realizing i could be fucking thi8ngs up.
 
#982
THELORAX802 said:
I am not worried about anything other than making sure i am using the proper methods to run these 600's (extension cords that can withstand 600 mag ballasts) and 400's. When i bought them i just went out, bought a ext cord with a man clock timer and plugged and played! Never realizing i could be fucking thi8ngs up.
Click to expand...

You should not be using extension cords on that size grow.1 ballast maybe even then it better be a heavy duty cord and short lol.
Switch to cob led and cut your veg power in half and flower by 1/3 easy peazy :)
 
#983
Cob leds on strips dude? I actually bought a surge protected ext cord dude and neevr once had i had more than one 600 ballast plugged into any 1 ext cord, but it would have a inline fan plugged in. Just trying to understand how to properly get bigger safely. So if i am not conveying that , i want to!
 
#984
No red flags will be drawn if you only have 1000 Watts
I know people that went from 150 to 600 $ a month with no flags
Hb
 
#985
hiboy said:
One thing I've learned is that you don't believe what the panel says because so many things get changed and updated and panel labeling is not always accurate
Go ahead and run your 125 amp you can always derate the sub breaker if you have a problem with the house tripping the main but looking at your panel it is highly doubtful that it will
Hb
Click to expand...

Thanks for the response. I guess today I'm going to do a survey of the electronics that are in the home and calculate the amps that will be used I just don't want to invest money that I don't have to because this is a rental and it's a temporary operation not permanent the run is going to be about a hundred to a hundred and fifty feet but the test garage is very far from panel
 
#987
Quban said:
Can I use aluminum wiring to run the 1:25 amp number to line to save $?
Click to expand...

You probably could but we always pull copper I don't know prices on it but you have to step up the wire size also which also means stepping up the pipe size most likely though inch and a half pvc will fit whatever you need
Electronics in the house don't add up for anything the only thing you're looking for if you're trying to calculate amperage is 240 stuff and that's about it the only 120 power in the house is a microwave dishwasher refrigerator etc. but you said there's no kitchens in there so most likely there's nothing to worry about but it will cost you a pretty penny to buy all the stuff you need for that garage run
Hb
 
#988
Thanks again for the guidance that's the thing since I'm only on the year lease I only have potentially about three crops depending how I space them out or a few more smaller-sized crops if I do it monthly I'm just wondering how much I should invest to get this going compared to how much I'm going to get back after everything is said and done since it's only a year lease
 
#989
Quban said:
Thanks again for the guidance that's the thing since I'm only on the year lease I only have potentially about three crops depending how I space them out or a few more smaller-sized crops if I do it monthly I'm just wondering how much I should invest to get this going compared to how much I'm going to get back after everything is said and done since it's only a year lease
Click to expand...
Honestly I probably wouldn't
I came back to change this response I definitely would not do it for one year
Too much work building too much work growing to pull it down
Hb
 
#990
hiboy said:
Honestly I probably wouldn't
I came back to change this response I definitely would not do it for one year
Too much work building too much work growing to pull it down
Hb
Click to expand...

Thanks for your feedback Highboy... I was worried about that.

I'm not so much worried about the amount of work as the amount of money invested. I have a large grow under me in the past I'm talking 5 room Warehouse Grow 600 amps, so I know what I'm doing but this will be my first solo project. the garage is already built walls are already in place roof is already in place what I am worried about is investing in the lights, the initial run to power the subpanel, and the power for electricity usage. Will these costs exceed my return? I'm on my way to the house now to measure the square footage of the garage and calculate power consumption at its Max Capacity
 
#991
@hiboy
I'm going to have a new build 3 phase power run to new setup.
Looking @ 480Y/277v
I thinking around 2000 amp/3000amp service to start might have to upgrade later, Looking to run 120v, 240v, 277v, & 3 phase 460 for large AC units, Gavita 277v lights, other misc 240v and 120v items.

My understanding is I will need a step down on a 277v branch to get a 240v/120v , Is this correct ?

Also for my setup do you think the 480Y/277v is the best 3 phase setup for this build ?

Also do you have a place you recommend to order panels/transformers from and what is the best brand to go with...Thanks
 
Last edited:
#992
oscar169 said:
@hiboy
I'm going to have a new build 3 phase power run to new setup.
Looking @ 480Y/277v
I thinking around 2000 amp/3000amp service to start might have to upgrade later, Looking to run 120v, 240v, 277v, & 3 phase 460 for large AC units, Gavita 277v lights, other misc 240v and 120v items.

My understanding is I will need a step down on a 277v branch to get a 240v/120v , Is this correct ?

Also for my setup do you think the 480Y/277v is the best 3 phase setup for this build ?

Also do you have a place you recommend to order panels/transformers from and what is the best brand to go with...Thanks
Click to expand...



Yes 480v primary is great for ac units
Gavita makes that voltage (277v) also, but if you ever move your stick with that voltage
Yes you will need a step down transformer to 400 amp 120/240 or multiple 200 amps
Gona get complicated
If you don't have electrical knowledge hire someone.
What is your general area
Hb
 
#993
THELORAX802 said:
I am not worried about anything other than making sure i am using the proper methods to run these 600's (extension cords that can withstand 600 mag ballasts) and 400's. When i bought them i just went out, bought a ext cord with a man clock timer and plugged and played! Never realizing i could be fucking thi8ngs up.
Click to expand...



14 gauge wire extension cords minimum per ballast @ 1000 watts
16 guage per 600 watts
Length under 100'
Hb
 
#994
Why thankyou kind sir! I really do appreciate folks reciprocating!
 
#995
hiboy said:
Post any questions for electrical advice here.
hb
Click to expand...
Got a question for you boss first of all let me start by first of all let me start by I rent this place is built in 1974 From the breaker box I have a dedicated welding plug No use for it and I forgot to mention my living room and garage are on the same breaker can I exchange it to several regular plugs basically wired up so I can run my growtent in the garage I think it's a 30 amp fuse what it work
 
#996
Robert72181 said:
Got a question for you boss first of all let me start by first of all let me start by I rent this place is built in 1974 From the breaker box I have a dedicated welding plug No use for it and I forgot to mention my living room and garage are on the same breaker can I exchange it to several regular plugs basically wired up so I can run my growtent in the garage I think it's a 30 amp fuse what it work
Click to expand...


What size is the breaker all of your living room outlets are supposed to be 20 amp maximum or 15 amp depending on the wire
sounds like somethings wrong with the wiring in your panel
Hb
 
#997
Hey hi boy, later in the year once it warms up here(late april-may) would you be willing to walk me through wiring up a huge foam insulated basement? I got plans!
 
#999
There only one litt;e light outlet in the entire space, of which has gotta be 20' wide, 100' long, with 7 ft ceilings, shit even the harvestman spiders down there are pretty chill. thankyou for your help, ahead of time!
 
#1,000
hiboy said:
What size is the breaker all of your living room outlets are supposed to be 20 amp maximum or 15 amp depending on the wire
sounds like somethings wrong with the wiring in your panel
Hb
Click to expand...
Kind of a joke it's a 15 amp if I'm running my thousand I can't have any AC in the house Way too much shit running through a 15 amp breaker That's the main reason I use LED because if the breaker flips LED comes right back on I had to wait too long with my HPs so do you think I could have that plug rewired with 4 to 8 regular plugs
 
Page 50 of 71 · Replies 981–1,000 of 1,407
Back
Top Bottom