Thanks, but I was thinking on the extraction phase.Where is the optimum time and temp?
I can't seem to find one.
5 minutes!!! Try rinsing for 30 secondsThanks, but I was thinking on the extraction phase.
Using cold 99% iso and washing for less than 5 minutes yields nice looking product, but letting it soak longer yields more green but much more oil.
I think he means hes getting a lot more by letting it soak longer? Thats more like oil aint it?5 minutes!!! Try rinsing for 30 seconds
Ya more like rso.I think he means hes getting a lot more by letting it soak longer? Thats more like oil aint it?
I know someone who tried to dab simpson oil...ha ha ha shit flamed up like a mo fo, its on youtube ha ha haYa more like rso.
Ya that second rinse is something i have never been into. I only use trim anyway and the second rinse pulls a lot of chlorophyllive read..... the first quick (?) wash will remove 80% of the tricomes, the second wash will remove another 80% of the 20% remaining tricomes.
rso oil will not flare up when put to flame or heat if it is made correctly.
rso oil has been decarbed, and theres no way the there will be anything left to flare up because the decarberation process happens at a higher temp.
the reason for those drops of water added when making rso is to insure that it gets decarbed. water boils off at 212 degrees and when you see those bubbles finnish thats when the decarb is complete, there cant be any alchohol left because that was all boiled off and removed and boiled off at much lower temp.
I'd hit it hahahaStarted with 148 grams of high quality shake and small bud.
Divided it into three quart jars (near filled all three).
Shake was chilled.
ISO came out of the freezer and I filled the first jar to the top.
Shook vigorously for about a minute and poured what I could into the second jar.
Got second jar mostly full of dripping solvent, and again shook for a minute.
Then into jar three. Still plenty of solvent to do the job.
After this last shake I drained off the solvent for filtration and distillation, yielding sample one.(on left)
View attachment 665229
All of the solvent saturated residual vegetation was dumped in a pan and set aside while sample one was attended to.
Results: Both washes yielded identical weight 7.5 gram concentrates.
15 grams total (10% return)
View attachment 665230
I had to gob some oil out in order to see any difference.
Left is first extraction and is more clear amber than the second wash, which still looks amber, but by comparison it looks green.
I am not experienced in evaluating vaping differences.
They both seem to vape the same, but the quick wash looks a bit better.
that looks like it should be in some caramel. heh.
looks good. im starting to think i need to learn to dab even if its just to get that regular buz up for the bud to work with.. it feels like a job to get high.
chris,
Thats awesome. .. i would hit itlil bit of sugar trimm and stems out of buds with single calyxes on em. it had about the size of a hockey puck. 10-15 sec wash in 99% iso. about 2h purging at 50C°. folded it, another 20 minutes and nearly no bubbles came up and thats the endproduct. My first QWISO that is a REAL shatter, i can even hold it in the fingers for a few seconds. Did a second wash, about 20 seconds, no squeezing. While it dripped through the filter i added some of my old kief to it.
View attachment 665443
And here is my first attempt at a THC-Liquid for an e-cigarette. Took about 0,1-0,2g of QWISO and mixed it with a few drops of iso and 4ml of base fluid (PG/VG 50/50). Didnt mix very well, a lot of oil got left in the mixing cup and the atomizer. But boy is it sparing. im smokin for more than 24h now and i had 3 friends visit and each one took a few hits.
View attachment 665444
Use a hot plate not a double boil.could we describe the purging better plz that just it setting in a dub boil?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?