GreenGalaxyFarm
- 1,700
- 263
1/4 strength isn't a lot taking into account your light is probably pushing 75-100%Yes just added back 1/4 strength FF Grow 6-6-4 to her mix I had the same thought haha
So it is more beneficial to run the FD6500 at 40% and put it closer than at 24"? I am wanting to hear more about this. I've been more in the 70-100% at 20" with my 2 Mars Hydros, but the overall coverage should be better than what I've had in there during the Mesozoic Era.Yeah at the beginning I was running the blurples in there, those have since been removed and now it is being ran with a phlizon FD6500, also have the other journal with the 4x8 tent that’s running the mars hydro FC-E8000, I’m using the blurple right now in veg only to root some clones and start some veggies in a 3rd tent
I figure she’s only pulling about 100w with veg only on, the FD6500 is running at 40% at 12” in the 4x4 and the FC-E8000 is at 70% at 18-20”
I’m feeding at 1300PPM and runoff is matching ph 6.5 input and output to me she theoretically isint eating a lot she’s defenitly seen a lot of stress but hasent Hermied anywhere being as she’s 7 weeks in 3 days or so I just am basically trying to baby her along while she tries to fatten up lol1/4 strength isn't a lot taking into account your light is probably pushing 75-100%
are you low on nutes, get her green then drop to 1/4
Not really sure I get the same PPFD with the photone app (using the same phone for both measurements) I am at about 850PPFD full coverage at 45% at 18” or I could go to 100% at 24-30” and get the same result so I figured why waste power if I can achieve the same thing, and in addition the light do put out SOME heat so in my cooler basement I figured that would be beneficial as wellSo it is more beneficial to run the FD6500 at 40% and put it closer than at 24"? I am wanting to hear more about this. I've been more in the 70-100% at 20" with my 2 Mars Hydros, but the overall coverage should be better than what I've had in there during the Mesozoic Era.
Ok serious question. How the fuq did you mount that fan in there? Been trying to cob something together to mount same style fan and so far have been unsuccessful.Yeah at the beginning I was running the blurples in there, those have since been removed and now it is being ran with a phlizon FD6500, also have the other journal with the 4x8 tent that’s running the mars hydro FC-E8000, I’m using the blurple right now in veg only to root some clones and start some veggies in a 3rd tent
I figure she’s only pulling about 100w with veg only on, the FD6500 is running at 40% at 12” in the 4x4 and the FC-E8000 is at 70% at 18-20”
Well sir, that would be the MacGyver wayOk serious question. How the fuq did you mount that fan in there? Been trying to cob something together to mount same style fan and so far have been unsuccessful.
Fkin brilliant man. I even have some 12-2 wire laying around! Look at that.Well sir, that would be the MacGyver waysmoke a few doobs you’ll see ideas haha
Thanks MikeyI’m feeding at 1300PPM and runoff is matching ph 6.5 input and output to me she theoretically isint eating a lot she’s defenitly seen a lot of stress but hasent Hermied anywhere being as she’s 7 weeks in 3 days or so I just am basically trying to baby her along while she tries to fatten up lol
Not really sure I get the same PPFD with the photone app (using the same phone for both measurements) I am at about 850PPFD full coverage at 45% at 18” or I could go to 100% at 24-30” and get the same result so I figured why waste power if I can achieve the same thing, and in addition the light do put out SOME heat so in my cooler basement I figured that would be beneficial as well
Being as the whole 4x4 setup is a brand new addition I wanted to see how the full setup performed so I pulled this plant and put her in there alone
Also the FD6500 is a pretty damn big light she is stated to flower a 5x5 and I’m in a 4x4 so the light is only about 4” from each wall
See that’s exactly what I thought haha I also strip the outer casing and use the coated wires as my LST wires hahahahahaFkin brilliant man. I even have some 12-2 wire laying around! Look at that.
Hell yeah man. This old guy i know uses wire to train his branches too, also im not one to judge what works lol.See that’s exactly what I thought haha I also strip the outer casing and use the coated wires as my LST wires hahahahaha
Don’t judge it works good when coiled to redirect branches
I like the bonsai method works great also have heavier gauge wire if needed,
Here’s 6x lettuce plants (3 per container) 2 types, then 3 big boy tomato in solos, and a sweet banana pepper in a solos plus some cookies Kush clones for a family member , gunna do 2x 2x4 veggie tents as well might throw a banzai tree in there or a few male bonsai plants to use for pollen (really cool topic I found on keeping bonsai mothers and fathers)
I just uppotted all those from 1x2 containers lol then bleach mopped the whole basement, I do it every other week
I’ll always use what I have on hand I mean it works perfect to position colas in openings too plus I have rolls of it lying around 12/2 14/2 breakers outlets ceramic light fixtures for the room etc gunna redo a ton in the spring when I shut the tents down to get everything g carpeted so I’ll add 6x new breakers, 3 will be dedicated to a tent each then 3 will be for accessories so 2 outlet runs to each tent that way I can plug the timer directly into the wall and the light directly into that, and I’ll spread out about 4 additional outlets on each side of each tent on their own circuit per tent for fans and other eccessories and get rid of power strips all togetherHell yeah man. This old guy i know uses wire to train his branches too, also im not one to judge what works lol.
Hah that pics headline should read "You're not alone". Those pups look awesome. I caught mine being totally antisocial late last night so snapped a picCouple nosy pups wondering what I’m doing
There’s a few others nosing aroundHah that pics headline should read "You're not alone". Those pups look awesome. I caught mine being totally antisocial late last night so snapped a pic
Too cool. yeah this one run the show around here. He is referred to as "the Oleever" and he is snoozing in between defoliations nowThere’s a few others nosing around
Lots of wood chopping going on here -- tires out even the best of usToo cool. yeah this one run the show around here. He is referred to as "the Oleever" and he is snoozing in between defoliations now
Haha yeah I just did all mine about a week ago, I shave them over in another room, we’ve been doing that since our oldest dog who is 13 currently lol just every 3 months they go down to a #2 nose to tail and I use a 1 on the feet and pawsToo cool. yeah this one run the show around here. He is referred to as "the Oleever" and he is snoozing in between defoliations now
A dog haircut here is $15.00Haha yeah I just did all mine about a week ago, I shave them over in another room, we’ve been doing that since our oldest dog who is 13 currently lol just every 3 months they go down to a #2 nose to tail and I use a 1 on the feet and paws
Saves me about $300 every 3 months haha
Oof I wish. Haha nobody will look at a dog this size for under $75 in my area and I have 3 plus the little guy hahaA dog haircut here is $15.00
I wanted to take my Australian Shepherd to the groomer for a shape up and wash, it was 300 dollars. He never made it to the groomer. lmao fk NYS.Oof I wish. Haha nobody will look at a dog this size for under $75 in my area and I have 3 plus the little guy haha
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?