• Home
  • Forums
  • Medical Cannabis Cultivation
  • Advanced Techniques & Problems
  • Seedling problem . What to do

Seedling problem . What to do

  • Thread starter Thread starter goodbye95
  • Start date Start date Oct 22, 2022
  • Tagged users Tagged users None

Seedling problem . What to do

goodbye95 Oct 22, 2022 223 Replies 21,212 Views
Page 2 of 12 · Replies 21–40 of 224
Prev
  • 1
  • 2
  • 3
  • 4
  • …
  • 12
Next
First Prev 2 of 12 Next Last

Ganjadad

Posts
796
Reactions
1,005
Joined
Oct 18, 2022
Points
93
Oct 22, 2022
#21
goodbye95 said:
Biobizz grow nutrients. Npk of 5.1.4
Click to expand...
Have you tried down to earth products? I’m gonna be trying bio-live 5-4-2 can’t wait to try it with teas
 
Quote Reply

Madmax

Posts
4,733
Reactions
9,126
Joined
Jul 4, 2018
Points
313
Oct 22, 2022
#22
goodbye95 said:
I do not see why 23.5 c is low. Considering vpd and current lvpd of the plant if i raised temp i would have to raise RH at the 80% range
Click to expand...
How so.my room vpd for my seedlings at moment is room temp 26.2 rh 65% and lst 23deg and im bang on 0.060 which is perfect for seedlings ..dunno where you get 80% lol.. Considering optimal leaf surface temp range is 23-25 your lst would b round 21 deg but yeah will still grow okay at that..
 
Reactions: GNick55
Quote Reply

goodbye95

Posts
272
Reactions
349
Joined
Dec 13, 2019
Points
63
Oct 22, 2022
#23
Madmax said:
How so.my room vpd for my seedlings at moment is room temp 26.2 rh 65% and lst 23deg and im bang on 0.060 which is perfect for seedlings ..dunno where you get 80% lol.. Considering optimal leaf surface temp range is 23-25 your lst would b round 21 deg but yeah will still grow okay at that..
Click to expand...
My led are probably too bright for my setup so the leaf temp is the same as room temp.
 
Reactions: GNick55
Quote Reply

goodbye95

Posts
272
Reactions
349
Joined
Dec 13, 2019
Points
63
Oct 22, 2022
#24
GNick55 said:
5-1-4? you sure??
Click to expand...
Yep
 

Attachments

  • IMG_20221022_164935.jpg
    46.7 KB · Views: 22
Reactions: GNick55
Quote Reply

NorthernOrganics

Posts
934
Reactions
2,001
Joined
Feb 9, 2022
Points
143
Oct 22, 2022
#25
The pot sitting on the ground can cause an issue with the water not being able to effectively drain from the bottom and the floor is usually colder that the surrounding air. This plant looks cold to me, possibly the roots are not getting enough oxygen, maybe a little hungry.
 
Reactions: GNick55
Quote Reply

goodbye95

Posts
272
Reactions
349
Joined
Dec 13, 2019
Points
63
Oct 22, 2022
#26
NorthernOrganics said:
The pot sitting on the ground can cause an issue with the water not being able to effectively drain from the bottom and the floor is usually colder that the surrounding air. This plant looks cold to me, possibly the roots are not getting enough oxygen, maybe a little hungry.
Click to expand...
That is an interesting observation. May i ask how you recognise the signs for these assumptions? It would help me a lot in the future !
 
Reactions: GNick55
Quote Reply

NorthernOrganics

Posts
934
Reactions
2,001
Joined
Feb 9, 2022
Points
143
Oct 22, 2022
#27
In my experience, when they get too cold they droop and the leaf surface gets shriveled like it's bunching up to stay warm. Probably has to do with transpiration and VPD. Your leaves also looks like they are holding water due to lack of transpiration or possibly just too much water given. The yellowing could be a sign of root stress/inhibited uptake caused by too much water (not enough oxygen, poor drainage) or low root temps (cold floor). Or it could be a sign that your nutrient ratio is off (hungry), probably low phosphorous.
 
Reactions: ComfortablyNumb, Sunasun and GNick55
Quote Reply

NorthernOrganics

Posts
934
Reactions
2,001
Joined
Feb 9, 2022
Points
143
Oct 22, 2022
#28
I'd start by getting the pot off the floor so it can freely drain and get air circulation underneath to help dry out the bottom of the pot. Watch your watering, let it dry out all the way. If you can, raise the temps even a little.
 
Reactions: ComfortablyNumb, Sunasun, GNick55 and 2 others
Quote Reply

Blastfact

Posts
1,324
Reactions
2,778
Joined
Feb 18, 2022
Points
263
Oct 22, 2022
#29
The light green fade your seeing in your plant is the ferts your using and possible ph issues. 5-1-4 is not a good cannabis npk number for veg. And your plant is in early veg. Soon as your plant has grown enough to have a couple of nodes your off to the veg races. A good npk number for veg is like 4-4-4. Heck your number would be great if it was say a 5-4-4 or 5-3-4. So with a 5-1-4 the plant is starving for "p". That looks like a turf/lawn fert npk? Kind of lost over those npk numbers.

Temp is slightly low and RH is slightly high. 25c-26c with 60% RH would be great! You have a 650w light? What is it and what size enclosure? It's hung really high at 51". Always measure light hang height from the top of the tallest plant. You can use the light to help control temps and humdity if you go about it right and keep great par/ppfd/dli/vpd. So let us what light, tent and controls and tools you have.

As far as the pot being on the floor. The only time that is ever good is when you have absolute control of your environment and your running a flood or bottom feeding/watering in the height of veg and or flower with coco or a highly controlled soil grow. Otherwise you want the pot be it a solid plastic type pot or fabric pot elevated on a pot stand or rack for air circ. Over all you won't know your plant is in trouble until it's to late if it's setting on the floor with a wet ass. During the fall and winter months the lower roots can stay wet/soaked. They can get cold and die. During the warmer months it is a recipe for plain old root rot with wet/soaked roots. Remember what ever you see going on with your plants actually happened 24/48/72 hours ago if not last week.

As far as watering,, amounts, how often. I wish we had a better way to teach new growers how and when to water without using the stupid dry, pot is lite, watered it's heavy bull shit. IMHO it sucks and leads to a lot of dead beneficial bio and a stupid yoyo effect. And it can even catch a experienced grower out. My current 2 x 4 grow is a coco, gaia green grow with de. I use recharge and epson salt mixes every few waterings and top dress the gaia green and de every 3 to 4 weeks. I noticed the humdity was low on my controls. That tells me the humidifier needs refilled and it's been two days since they were watered. Open the tent up and sure enough the humidifier needs refilled. But the plants are doing great! And they don't need watered at all. There just short of 5 weeks old from sprouts and had been drinking a half gallon every two days. So today would be a normal water day. But they have changed up on me and the way the coco feels and looks they may not need watering until Monday.
 
Reactions: Lockebox, Sunasun, Madmax and 1 other person
Quote Reply

Madmax

Posts
4,733
Reactions
9,126
Joined
Jul 4, 2018
Points
313
Oct 22, 2022
#30
goodbye95 said:
My led are probably too bright for my setup so the leaf temp is the same as room temp.
Click to expand...
At 10% your lights wouldnt b bright at all..have you the dimmer swwitch turned on...Your at 10% of 650watts which equates to 65 watt and your lights at 1.3 mtrs away from them ..i cannot see how your leaf temp is the same as room temp that far away...something is amiss.those plants can easily take double what you re giving them brother..
 
Reactions: GNick55
Quote Reply

goodbye95

Posts
272
Reactions
349
Joined
Dec 13, 2019
Points
63
Oct 23, 2022
#31
NorthernOrganics said:
In my experience, when they get too cold they droop and the leaf surface gets shriveled like it's bunching up to stay warm. Probably has to do with transpiration and VPD. Your leaves also looks like they are holding water due to lack of transpiration or possibly just too much water given. The yellowing could be a sign of root stress/inhibited uptake caused by too much water (not enough oxygen, poor drainage) or low root temps (cold floor). Or it could be a sign that your nutrient ratio is off (hungry), probably low phosphorous.
Click to expand...
I had the same problems at the summer where i tried so HARD to lower the temperatures. i started seedlings at 27C then and could not get lower than that. So i doubt it is the temp what i am searching for to change but i raised the pots from the floor and put them in a wooden rat with a heating mat beneath anyway .As far as transpiration i have invested in everything i need to keep the values stable and a very high end IR thermometer to be as precise as possible . Every time i push transpiration ( like 24 C and 60% RH ) the plants seem to drink more water than they can hold and start dropping and low leaves start to yellow. That is why i raise humidity to stress as little as possible . I am doing something very wrong here cause there are no excuses to have these results with the equipment i have .I monitor seriously EVERYTHING. The funny thing is before i got the equiment i had a 10 dollar PH meter, no EC meter , no controller for the temp and RH ,no Light meter and i was pretty much doing anything by luck . The first grow i got gave me 300 grams in a 3x3 space with a 300watt led lamp. Now my eqipment is worth like 3000 dollars and i cannot get past the seedling stage.
 
Reactions: GNick55
Quote Reply

goodbye95

Posts
272
Reactions
349
Joined
Dec 13, 2019
Points
63
Oct 23, 2022
#32
Blastfact said:
The light green fade your seeing in your plant is the ferts your using and possible ph issues. 5-1-4 is not a good cannabis npk number for veg. And your plant is in early veg. Soon as your plant has grown enough to have a couple of nodes your off to the veg races. A good npk number for veg is like 4-4-4. Heck your number would be great if it was say a 5-4-4 or 5-3-4. So with a 5-1-4 the plant is starving for "p". That looks like a turf/lawn fert npk? Kind of lost over those npk numbers.

Temp is slightly low and RH is slightly high. 25c-26c with 60% RH would be great! You have a 650w light? What is it and what size enclosure? It's hung really high at 51". Always measure light hang height from the top of the tallest plant. You can use the light to help control temps and humdity if you go about it right and keep great par/ppfd/dli/vpd. So let us what light, tent and controls and tools you have.

As far as the pot being on the floor. The only time that is ever good is when you have absolute control of your environment and your running a flood or bottom feeding/watering in the height of veg and or flower with coco or a highly controlled soil grow. Otherwise you want the pot be it a solid plastic type pot or fabric pot elevated on a pot stand or rack for air circ. Over all you won't know your plant is in trouble until it's to late if it's setting on the floor with a wet ass. During the fall and winter months the lower roots can stay wet/soaked. They can get cold and die. During the warmer months it is a recipe for plain old root rot with wet/soaked roots. Remember what ever you see going on with your plants actually happened 24/48/72 hours ago if not last week.

As far as watering,, amounts, how often. I wish we had a better way to teach new growers how and when to water without using the stupid dry, pot is lite, watered it's heavy bull shit. IMHO it sucks and leads to a lot of dead beneficial bio and a stupid yoyo effect. And it can even catch a experienced grower out. My current 2 x 4 grow is a coco, gaia green grow with de. I use recharge and epson salt mixes every few waterings and top dress the gaia green and de every 3 to 4 weeks. I noticed the humdity was low on my controls. That tells me the humidifier needs refilled and it's been two days since they were watered. Open the tent up and sure enough the humidifier needs refilled. But the plants are doing great! And they don't need watered at all. There just short of 5 weeks old from sprouts and had been drinking a half gallon every two days. So today would be a normal water day. But they have changed up on me and the way the coco feels and looks they may not need watering until Monday.
Click to expand...
If my PH is wrong it means my ph meter is faulty. I have a bluelab Ph meter and i water exaclty at 6.5 every time. A far as the Npk ratio I have also a fertilizer of 4-3-6 which i am gonna use in the next watering ( i plan on starting at 400 ppm ). As for the temp , i cannot get past 23,5 but i invested in a heater which should come in 3 days from now and i will try to maintain the temp and rh to the values you provide above and i will see how it goes from there. I managed to raise the lights at 150 cm . The instruments i use are Spiderfarmer SF-7000, Ec primaklima fan 680m/h, Ph meter by Bluelab ,Ec meter by Bluelab , Growbase Pro controller (search for German controller), FLIR Ir spot thermometer and a cheap lux meter which i do not use, I have also made a custom humidifier with a fog machine inside a plastic box with a fan pushing the fog everytime it switches on( works like a charm ). I also raised the pot from the floor and put then above a wooden rack with a heating mat beneath. Mostly the problems started when i started monitoring VPD and tried to keep it at 0.8 etc. From the summer till here i ve thrown away about 25 seeds that made it to seedling and died. No excuses with that equiment .
 
Reactions: GNick55
Quote Reply

goodbye95

Posts
272
Reactions
349
Joined
Dec 13, 2019
Points
63
Oct 23, 2022
#33
Madmax said:
At 10% your lights wouldnt b bright at all..have you the dimmer swwitch turned on...Your at 10% of 650watts which equates to 65 watt and your lights at 1.3 mtrs away from them ..i cannot see how your leaf temp is the same as room temp that far away...something is amiss.those plants can easily take double what you re giving them brother..
Click to expand...
i know . there is something else . but the leaf temp is higher indeed. I notice it gets lower just the day i water them and then it goes up again. Also the growth is starting the day i water then and keeps on for the day after then it gets stunned again .
 
Reactions: GNick55
Quote Reply

goodbye95

Posts
272
Reactions
349
Joined
Dec 13, 2019
Points
63
Oct 23, 2022
#34
Here are the instruments i use and the pots from below
 

Attachments

  • IMG_20221023_085235.jpg
    99 KB · Views: 22
  • IMG_20221023_085230.jpg
    153.6 KB · Views: 27
  • IMG_20221023_085225.jpg
    183.9 KB · Views: 23
  • IMG_20221023_085220.jpg
    199.3 KB · Views: 25
  • IMG_20221023_085218.jpg
    105.1 KB · Views: 24
  • IMG_20221023_085203.jpg
    69.4 KB · Views: 24
  • IMG_20221023_085200.jpg
    71.8 KB · Views: 27
  • IMG_20221023_085154.jpg
    81.1 KB · Views: 26
  • IMG_20221023_085426.jpg
    116 KB · Views: 24
  • IMG_20221023_085412.jpg
    102.3 KB · Views: 25
Reactions: Blastfact and GNick55
Quote Reply

GNick55

Staff
Supporter
Posts
15,484
Reactions
49,614
Joined
Jan 11, 2020
Points
438
Oct 23, 2022
#35
goodbye95 said:
If my PH is wrong it means my ph meter is faulty. I have a bluelab Ph meter and i water exaclty at 6.5 every time. A far as the Npk ratio I have also a fertilizer of 4-3-6 which i am gonna use in the next watering ( i plan on starting at 400 ppm ). As for the temp , i cannot get past 23,5 but i invested in a heater which should come in 3 days from now and i will try to maintain the temp and rh to the values you provide above and i will see how it goes from there. I managed to raise the lights at 150 cm . The instruments i use are Spiderfarmer SF-7000, Ec primaklima fan 680m/h, Ph meter by Bluelab ,Ec meter by Bluelab , Growbase Pro controller (search for German controller), FLIR Ir spot thermometer and a cheap lux meter which i do not use, I have also made a custom humidifier with a fog machine inside a plastic box with a fan pushing the fog everytime it switches on( works like a charm ). I also raised the pot from the floor and put then above a wooden rack with a heating mat beneath. Mostly the problems started when i started monitoring VPD and tried to keep it at 0.8 etc. From the summer till here i ve thrown away about 25 seeds that made it to seedling and died. No excuses with that equiment .
Click to expand...
ok, i think your trying to hard, don’t take it personally but it’s not your equipment..
i can say i’ve never lost a seedling every seed pops.. i’ll be posting my method tomorrow on my sunday update as i just put some in a glass of water/h2o2 mix till morning..
 
Reactions: Sunasun
Quote Reply

GNick55

Staff
Supporter
Posts
15,484
Reactions
49,614
Joined
Jan 11, 2020
Points
438
Oct 23, 2022
#36
goodbye95 said:
Here are the instruments i use and the pots from below
Click to expand...
nice, neat and clean your set for perfection..
 
Reactions: Blastfact
Quote Reply

goodbye95

Posts
272
Reactions
349
Joined
Dec 13, 2019
Points
63
Oct 23, 2022
#37
As far for the difference in leaf temp and room temp
 

Attachments

  • IMG_20221023_085639.jpg
    36.3 KB · Views: 25
  • IMG_20221023_085718.jpg
    90.4 KB · Views: 24
Reactions: GNick55
Quote Reply

GNick55

Staff
Supporter
Posts
15,484
Reactions
49,614
Joined
Jan 11, 2020
Points
438
Oct 23, 2022
#38
goodbye95 said:
As far for the difference in leaf temp and room temp
Click to expand...
don’t worry about that too much.. just make sure you have a wet dry cycle, not always but sometimes i let seedling or small plants if healthy go a day without water to encourage roots to grow looking for it..
i need to go through your thread to help you out, i’ll do that tomorrow.,
hang in there, your gonna be a pro soon..
 
Reactions: Lockebox, Sunasun, SweetLeafGrow and 1 other person
Quote Reply

goodbye95

Posts
272
Reactions
349
Joined
Dec 13, 2019
Points
63
Oct 23, 2022
#39
GNick55 said:
ok, i think your trying to hard, don’t take it personally but it’s not your equipment..
i can say i’ve never lost a seedling every seed pops.. i’ll be posting my method tomorrow on my sunday update as i just put some in a glass of water/h2o2 mix till morning..
Click to expand...
you know. It is really frustrating to have invested in all these and fail so hard. Also it is very sad that i all this time i was doing everything by luck without equiment and got crazy results for an in experienced grower and now that i have all these i cannot get past seedling stage.
 
Reactions: Lockebox and GNick55
Quote Reply

GNick55

Staff
Supporter
Posts
15,484
Reactions
49,614
Joined
Jan 11, 2020
Points
438
Oct 23, 2022
#40
goodbye95 said:
you know. It is really frustrating to have invested in all these and fail so hard. Also it is very sad that i all this time i was doing everything by luck without equiment and got crazy results for an in experienced grower and now that i have all these i cannot get past seedling stage.
Click to expand...
you will, maybe you’ll like method, watch it tomorrow evening.,
are these seeds your using bought from a breeder/seed bank or seeds from weed you smoke?
 
Quote Reply
Page 2 of 12 · Replies 21–40 of 224
Prev
  • 1
  • 2
  • 3
  • 4
  • …
  • 12
Next
First Prev 2 of 12 Next Last

Thread info

Replies 223
Views 21,212
Started Oct 22, 2022
Latest post Nov 7, 2022
Starter goodbye95
Forum Advanced Techniques & Problems

Latest posts

  • R
    First Grow and I think I'm ready to start my flush and harvest
    • Latest: reefer024
    • 25 minutes ago
    General Indoor Growing
  • T
    Any tips for my first guerilla grow?
    • Latest: TheIslandIsGreen
    • 47 minutes ago
    General Outdoor Growing
  • Nutrient burn or is it a deficiency....
    • Latest: GNick55
    • Yesterday at 11:08 PM
    Basic Growing Information
  • 2026 Outdoor Grows! let's see em!
    • Latest: GNick55
    • Yesterday at 11:02 PM
    General Outdoor Growing
  • The Funk and The Fog
    • Latest: Tumbleweed375
    • Yesterday at 10:19 PM
    Grow Diaries
  • Home
  • Forums
  • Medical Cannabis Cultivation
  • Advanced Techniques & Problems
  • Seedling problem . What to do
  • Contact us
  • Terms and rules
  • Privacy policy
  • Help
  • Home
Community platform by XenForo® © 2010-2026 XenForo Ltd.
Menu
Log in

Sign up

  • Home
  • News
  • Classifieds
  • Forums
    • What's new Featured content New posts New Articles New articles New products Latest activity
  • Social
  • Strains
  • Live
  • Learn
  • Brands
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?