Log In Register

Still MASHIN' - Under Current 12XLs, Flip-Flop, '91 Chem

  • Thread starter Thread starter RollinEndough
  • Start date Start date
  • Tagged users Tagged users None

Still MASHIN' - Under Current 12XLs, Flip-Flop, '91 Chem

RollinEndough 1,420 Replies 193,067 Views
Page 9 of 72 · Replies 161–180 of 1,421
They're not very large nugs but there's a lot, density is increasing rapidly now after the 5 week mark passed. Maybe a bit over a pound from the 3? We shall see in about 3 weeks.
 
your grow room gives me wood. im so happy to be following your experiment. i have a similar room in the process. i have 4 out of what was going to be 7 lights but i like the cleanliness of your room and the efficiency. could you draw up a diagram of your room layout so we can all see exactly how it is set up. i have a 10wx16 on the left and 12 on the right. i want to see if i can squeeze this into my bloom room one. i plan on building the second witch would be a 4kw/8 lamp flip. right now the room that is running is just 4kw flat. next run im going to get my 2-uc 12s and some hoods. i was on a super budget for my current set up. ill post some pix in a min. thanks for your time. your set up is super clean and you are def. meticulous. ill keep my fingers crossed that it works out the way your projecting.
 
budbrothers - Schwiiiiiiing! Haha. I'm glad you appreciate the minimalist approach to growroom design. This particular setup resides in a 13'x19' space if I were to wall it in, but there's some dead space so I can get wide angle photos.

Your 10'x16' is plenty to rock out a couple of 12 site rigs in fine style.

I got a hair up my ass yesterday and decided to finally make the switch to Dutchmaster after staring at the pretty gold jugs for a minute. Pulled out 5 weeks of growth with the initial 2.5L of Hesi Hydro Grow per UC, adjusted PH 3-4 times - that's it!

I overshot their target PPM though, landed at 600 at a 2/3 dilution. Pulled 50 gallons out of each system and topped back up, sitting at 500 now. May repeat this evening to get closer to 400.
 
I'm surprised you are running it so low. I cranked up the ppms and they loved it (in a UC style).

I know Daniel/CCH20 recommends lower ppms but I figure if they can take it, why not.

Running the entire DM line and it nearly pH balances itself.
 
I start out at 650 and by the end of week 2 I have them at 850 ppm then at flip 1000ppm and ride it at 1100 to 1300...JACK
 
Well you've got me doing some head scratching boys. They were looking at me funny with their wrinkled deep green faces as if begging to say, "WTF boy, you wanna nuke us?"

Even FreshSteppin's Chem are saying no to anything above 450-500 and they're retarded thick.

Maybe it's the DNA? I would like to figure out what the variable may be here as it seems more food at play the faster they can get things done.
 
I start out at 650 and by the end of week 2 I have them at 850 ppm then at flip 1000ppm and ride it at 1100 to 1300...JACK

Agreed. They come out of the cloner and go into 600ppms for a week before being blasted for the stretch week at ~850 - 1100. Then on to flower nutes.
 
x-files-believe1.jpg
 
Oh wait, I know what's probably up. Chances are I'm reading the x500 vs the x700 ec-to-ppm scale.
 
That's it! My 300 is your 420 and my 500 is your 700. So not too far off for a bunch of stoners. :D
 
Well you've got me doing some head scratching boys. They were looking at me funny with their wrinkled deep green faces as if begging to say, "WTF boy, you wanna nuke us?"

Even FreshSteppin's Chem are saying no to anything above 450-500 and they're retarded thick.

Maybe it's the DNA? I would like to figure out what the variable may be here as it seems more food at play the faster they can get things done.

Thats what they do when they need a flush 24 hrs and you will thank me later...JACK
 
I don't believe it jack.
my ladies which are the same cut that rollinendough has is tapping out at 900ec

or 450 ppm. They are 45 days old and huge bushes
 
this is directed at all of you guys growing uc. what do you think of cutting edge nutrients? im running it in soil and it basically balances it self out in my res. it really strong shit. if you follow there label your ppm is like 1800. i have to use 25% of the recommended. i fuckin hate soil by the way! there are to many variables. its suppose to be easy. nope its just messy and hard to get accurate.

UC here i come.


im gonna try to post some pix of my lay out i have alot of dead space too. thats why im wondering if i should run a 16 on the left side of my room and a 12 on the right. still trying to figure this forum shit out. maybe its because im a noob. i dunno
 
cutting edge doesn't like the dissolved oxygen in the uc; leaves a film/gunk on everything... i didn't like em
 
cutting edge doesn't like the dissolved oxygen in the uc; leaves a film/gunk on everything... i didn't like em

thanks man what do you think would get me these kind of results ":ridinghorse:" or these ":boogie:" i need something steril and easy to use. not alot of bs if you know what i mean. from what i have seen on the forums its Dutch Master and something else i cant remember
 
thanks man what do you think would get me these kind of results ":ridinghorse:" or these ":boogie:" i need something steril and easy to use. not alot of bs if you know what i mean. from what i have seen on the forums its Dutch Master and something else i cant remember

DM, H&G Aqua Flakes, Jack running Canna (or Advanced?) and SkyHigh just had a good run with Nutri+ line (I can't find it anywhere though).
 
Great setup as always Mash! Your the one that sold me on these systems and I am a believer now! I have found that a very simple regiment of the following has proved to produce fat sticky buds that smell wonderful with proper flush :

Ionic Bloom
Ionic Boost
Magi-Cal or CalMag
Sugar Daddy
Awesome Blossom (last 6 weeks of flower)

Hope all is well, I'm subscribing to this one brotha!

Peace
turbo
 
Page 9 of 72 · Replies 161–180 of 1,421
Back
Top Bottom