Captspaulding
What’s the matter? Don’t like clowns? 🤡
Supporter
- 17,677
- 438
Dude, do you have a sticker maker by chance? I would love to put some of those gorillas up for you in my posted stuff. You friggin nailed that design……Feeding and a lot of cleaning up today. Hope to cure those spots, and my headache!
Created a playlist that seems to be the right mood for the plants today.
Might keep updating it.
I don't but I think I can print some, just need to get some of the sticker paper at staples. I used some waterslide paper to print it for the first cannagorilla mold:Dude, do you have a sticker maker by chance? I would love to put some of those gorillas up for you in my posted stuff. You friggin nailed that design……
I don't but I think I can print some, just need to get some of the sticker paper at staples. I used some waterslide paper to print it for the first cannagorilla mold:
View attachment 2113057
Duuuuuude. Yes! I just got an offer fro. A homie here, to drop him some design ideas for some stickers. If you actually did print me out some, bet I’d have them in the right spot, no rush or anything, I just seen the logo again and shit, it’s dope. Maybe I can toss him an idea involving a clown, a spider and a gorilla.Haha just realized that was a slightly different cannagorilla variation.
Definitely! I can have some printed, just gotta pick up the paper. Might just do that tonight!Duuuuuude. Yes! I just got an offer fro. A homie here, to drop him some design ideas for some stickers. If you actually did print me out some, bet I’d have them in the right spot, no rush or anything, I just seen the logo again and shit, it’s dope. Maybe I can toss him an idea involving a clown, a spider and a gorilla.
Imagine an arm wrestling table with the clown and spider on one side sweating both critters trying to pin one gorilla hand, while the silver back is puffing one laughing at them…..
DO YOU SEE
I’ll be yer Gatdamned huckleberry!Definitely! I can have some printed, just gotta pick up the paper. Might just do that tonight!
No sir! Only stone I own is a pet rock.Here is the how to on the Tumble Cloner:
Parts List:
These pieces can be found in most hardware stores where landscape and plumbing supplies are sold. I always recommend checking the places near you for the best quality equipment at the best price.
Assembly:
- Bucket with lid- I used a 2 gallon (7.6L), but this design would also work with a 5 gallon. Just make sure you have a lid.
- 1/2" PVC End Caps - (x2)
- 1/2" PVC Tube - You'll really need less than a foot, but that link is to a 24" pipe. If you can find a place that'll sell you less, buy it.
- 1/2" PVC Tee
- PVC Riser
- Submersible Pump
- 360 degree irrigation sprayers
It all connects together pretty easy. The pump has the same thread as the PVC fittings.
View attachment 2113571
- Thread the riser into the output (top opening where the water comes out) of the pump.
- Attach the PVC Tee to the riser.
- Place assembly into bucket and measure the space between the Tee and the wall... twice.
- Cut the PVC pipe to spec, and assemble
- Pop on the PVC end caps.
- Lay out your sprayer design on your PVC assembly, and drill with a 13/64" bit and then screw a #10 screw into the opening. This will create a thread for your sprayers.
- Attach sprayers. Use your fingers. A wrench or pliers will destroy the sprayer.
- OPTIONAL? - I put an airstone in there just because I thought that would help. @Mikedin and @Captspaulding is there an airstone in your setup?
Bucket:
-You will want it to be black, or at least dark enough to not let light into your reservoir... The roots hate light, and algae loves it! I used a black rubberized paint over the whole thing.
-I decided to run my wires through the top of the bucket, just because I didn't want to put a hole in the bucket...
-I used 2inch foam collars, but you can use net cups if you like. Will definitely make it look nicer, and probably be easier to remove the collars.
View attachment 2113570
View attachment 2113569
Bits of advice:
-Measure your bucket at the bottom of the inside... You'll be pissed if you have to pull it apart just to take an extra half inch off the pvc pipe.
-After you drill everything and deburr all the drill holes. Wash it thoroughly! Make sure to rinse it 2 times after you THINK all those bits of pvc and bucket are gone... Those sprayers are tiny. The inner diameter.. minuscule. A small sliver of plastic will ruin your day.
Thanks! I have an AC fan, and it is LOUD af. I have a comparison in the first post. CFM and noise level the spider farmer fan blows it away!Hey @Tumbleweed375 acinfinity giving away a fan on ig. Heads up acinfinityinc
haha! I knew it was a bit overkill. I figured I'd dust it off just in case i catch the hydro bug one of these daysNo sir! Only stone I own is a pet rock.
What’s his name?No sir! Only stone I own is a pet rock.
Rolling stoneWhat’s his name?
There is something wrong with your ac infinity fan, its not supposed to make that noise.Thanks! I have an AC fan, and it is LOUD af. I have a comparison in the first post. CFM and noise level the spider farmer fan blows it away!
I am a big fan of increased airflow though! always appreciate a heads up
Same, my 6in is very quiet. Only thing that makes a little noise is the air getting pulled through ducting. I agree.There is something wrong with your ac infinity fan, its not supposed to make that noise.
I have mine turned on 24/7 since day of release and mine are nearly silent.
Yeah! I think the issue is with the oscillating mechanism on this one. The fan is relatively quiet when set straight.There is something wrong with your ac infinity fan, its not supposed to make that noise.
I have mine turned on 24/7 since day of release and mine are nearly silent.
I don't have a physical copy of mandrill or paranoid, but i do have some other Sabbath! All of their covers were pretty interesting to say the least.I bought the album, mandrill, 50 years ago! Couldn’t resist the cover!Same reason I bought Black Sabbath, paranoid! But it was an eight track tape! L O L!
Definitely. I have the 4in inline from ac infinity. Very quiet. My whole rig (tent included) is Ac infinity. Impressive equipment all around.Same, my 6in is very quiet. Only thing that makes a little noise is the air getting pulled through ducting. I agree.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?