THCFarmer.com
121,290 Members Log In Register
Log In Register

Who is the go to LED guy?

  • Thread starter Thread starter SkunkyDunk
  • Start date Start date
  • Tagged users Tagged users None

Who is the go to LED guy?

SkunkyDunk 354 Replies 48,509 Views
Page 11 of 18 · Replies 201–220 of 355
#202
here the thing with the cob..... the cob is 66 I guess..... for 50w
i'm paying 20 a strip plus a driver plus putting it togther, plus the extra parts to hang it and etc... so I deal with 4 people to pay MORE... then what I'm paying for the light and shipping from China........

so I can get all this shipped from China to me in the same time as...

a 315cmh light from cal..... they went 113.00 for the light and 69.00 to ship plus tax so say 200.00

261 for alot more .......... Sry but Alibla got my $$$$

and yes I GOT A DEAL But still if it was 361... it's Still Worth it......
 
#203
I too have been shopping "around", at local hydro shops, online etc.
Spec wise, I got from Kingbrite, delivered, a fully comparable product for third the cost.
If the name brand lasts 5 years and these last 3 I'm still ahead in the game in my view!
 
#204
SkunkyDunk said:
I too have been shopping "around", at local hydro shops, online etc.
Spec wise, I got from Kingbrite, delivered, a fully comparable product for third the cost.
If the name brand lasts 5 years and these last 3 I'm still ahead in the game in my view!
Click to expand...
+1 👉
 
#205
340w for 370.. is hard to bet....... I think thats what I should of paid....

they didn't make $$$$$ on this deal with me but they will on the next 1.....
 
#206
Pretty ugly for MARS!

overgrow.com

Mars Hydro refuses warranty

Damn, I can only imagine the amount of potential customers reading this thread and vowing to never purchase anything from mars hydro! While, in this situation I would have probably never even contacted mars because the light is still usable. But, if i was to contact them over the issue I would...
overgrow.com overgrow.com
 
#207
Ok guys, I'll be setting my lights up in my grow thread here shortly.
But first,, I need opinions from you qb board guys.
I'm setting up for a 80"×36" canopy.
I have 4 - 25"×7.75" panels. Or a single panel footprint of 50"×15.5".
My length isn't critical but what do youuns recommend as a space between the 7.75" width of panels for full coverage/penetration?
I hope that made since.
TIA
 
#208
SkunkyDunk said:
Ok guys, I'll be setting my lights up in my grow thread here shortly.
But first,, I need opinions from you qb board guys.
I'm setting up for a 80"×36" canopy.
I have 4 - 25"×7.75" panels. Or a single panel footprint of 50"×15.5".
My length isn't critical but what do youuns recommend as a space between the 7.75" width of panels for full coverage/penetration?
I hope that made since.
TIA
Click to expand...
@Mr.jiujitsu would be better at this one!
 
#209
Yeah I'm gonna make a guess of about 9 to 10 inches between panels.
That would be an approx. 50"×25" panel.
On my mover, with 10" between the long ends I would move them back and forth 20" with a 30 second delay at each end.
 
#210
So after looking at the HLG 550 v2 R spec panel, which basically is what 2 of these panels create and which is said to lite a 5'×5' area are approximately 4 1/2" apart.
I'm thinking these are specs aimed at tent type reflective environment which I don't have.
But I think this should give best performance.
So now to drill the Robo Sticks to mount my custom carbon fiber mounts.
 
Last edited:
#211
SkunkyDunk said:
So after looking at the HLG 550 v2 R spec panel, which basically is what 2 of these panels create and which is said to lite a 5'×5' area are approximately 4 1/2" apart.
I'm thinking these are specs aimed at tent type reflective environment which I don't have.
But I think this should give best performance.
So now to drill the Robo Sticks to mou t my custom carbon fiber mounts.
Click to expand...

If you are able to utilize them in your grow area, mylar emergency blankets would give you the reflective environment. You could use them as either wall cover or reflective curtains. They are cheap and reflective.
 
#213
Check out post #35 here, https://www.thcfarmer.com/threads/the-new-project.100894/page-2, this is how I built my light using HLG QB132's. Each board is only 3" or so away from each other. It was a unit I built to fit specifically in my 2x4 tent. What is nice is that you have a mover, that will allow for a bit more space between the panels without losing the efficacy of the light. Personally I would lay out my frame first then figure out how to lay in the boards. I chose to stagger the boards for more coverage over the width of the space which may be useful for your set-up as well.
 
#214
Ok, red LED question.
I just fired my panels up, V2, with reds switched off. I'll be vegging for a few weeks before turning back.
When are Youuns adding the reds?
Do ya start hitting them with P prior to turning them on or when ya turn them on?
Or is this a stupid question and run em?
 
#215
SkunkyDunk said:
Ok, red LED question.
I just fired my panels up, V2, with reds switched off. I'll be vegging for a few weeks before turning back.
When are Youuns adding the reds?
Do ya start hitting them with P prior to turning them on or when ya turn them on?
Or is this a stupid question and run em?
Click to expand...
The only stupid question is the one that is not asked!

Mine are always on, (older model) but they are in my flower tent. If I had the ability, they would be off in a veg tent, but that's me.
If you haven't already.....Google The Emerson Effect.
 
#216
Buzzer777 said:
The only stupid question is the one that is not asked!

Mine are always on, (older model) but they are in my flower tent. If I had the ability, they would be off in a veg tent, but that's me.
If you haven't already.....Google The Emerson Effect.
Click to expand...

Yes, even with the HPS / MH difference the red spectrums are what make our buds swell.
I agree with leaving them off till flower.
I'll be going from T5's to these so that's redder already.
 
#217
SkunkyDunk said:
Yes, even with the HPS / MH difference the red spectrums are what make our buds swell.
I agree with leaving them off till flower.
I'll be going from T5's to these so that's redder already.
Click to expand...
Red also makes them stretch.
 
B

Burned Haze

Guest
#218
thought their video def shows some good points on high energy efficiency vs hps and even hlg discount advantages (hlg doesn’t do state energy discounts for lp) plus it explained to people and their costumers about vpd and they need it for led’s and to follow the chart.




Not affiliated to the company above^
 
Last edited by a moderator:
#219
I am currently running a test with a new Led unit, it is very much a light aimed at blooming with a 3k spectrum plus 660 nm red diodes. So far my plants are looking good in veg. I am not going to flip the light cycle until Feb. 1, so we shall see how the plants deal with the transition.
 
Page 11 of 18 · Replies 201–220 of 355
Back
Top Bottom