Super Silver Haze Dwc grow

[Moe.Red]

your light is tooooooo far away from the plant

Doh I just assumed he raised it for pics.

 

[PK1]

Doh I just assumed he raised it for pics.

i dnt know. i just saw one pic and it seems to far. However, im sure you guys got this

 

[Moe.Red]

No man you are right if that is the normal height. Too far. His node spacing is so tight I’ll bet he lowers it right @Thebestoftheworst ?

 

[Thebestoftheworst]

your light is tooooooo far away from the plant

It’s a 2500 I thought I would stress it but what’s best height in veg

 

[Thebestoftheworst]

No man you are right if that is the normal height. Too far. His node spacing is so tight I’ll bet he lowers it right @Thebestoftheworst ?

Correct i was hoping for a reason for some stretch but I’m very interested in the heights for each stage

 

[Thebestoftheworst]

i dnt know. i just saw one pic and it seems to far. However, im sure you guys got this

Better or too close ?

 

[PK1]

looks about right, but how far is it and what is the intensity at?
get a app called photone on Iphone. its free and it's not accurate. lol! but it helps to get some sort of idea of lux numbers for what its worth
if you don't have an iphone than any open source light measuring app.

 

[GanjaFarmer24]

18-20 inches away sounds about right to me.

 

[Thebestoftheworst]

Also @Moe.Red I did lower the light like you and @PK1 suggested . I count 9 tops I did remove one fan leave in order to give a little light to two tops . And I had set res ppm to 600 @5.8 Sunday and today I’m 450 ppm at 5.8 with res temp of 20c and room temp 79 . Night times 70 . Does this mean I need to be upping the dosage ? Water level has dropped inch and a half of keep it at 600 ? Also do I add up a gallon at 600 and just add that to my res ? Never done a top off

 

[Thebestoftheworst]

looks about right, but how far is it and what is the intensity at?
get a app called photone on Iphone. its free and it's not accurate. lol! but it helps to get some sort of idea of lux numbers for what its worth
if you don't have an iphone than any open source light measuring app.

I’m in luck because I happen to have a iPhone and I’m about 20 inches now I was about 30 earlier today and also thanks again for all the advice and time you take to help

 

[PK1]

just watch out for heat burns from the light. Get some fans in there for air circulation. I poiint the fan to the light so it breaks the heat.
look for leaves tacoing and if it is than raise it a bit or reduce the intensity.

If it was me, i would bend the top to get more lights to the bottom branches.
read this and you should pick up a lot of tips

PK Monster Closet | Deep water culture (dwc) | Gorilla Glue

Welcome to my monster hydro closet. In here i've got 3ft width 6ft length and a 8ft ceiling. I've got reflective styrofoam on the walls that is for now about 4 ft tall. I didn't put anything on the floor as i wanted the temperature from the floor to cool the rez down. We don't have infloor...

www.thcfarmer.com

 

[PK1]

Also @Moe.Red I did lower the light like you and @PK1 suggested . I count 9 tops I did remove one fan leave in order to give a little light to two tops . And I had set res ppm to 600 @5.8 Sunday and today I’m 450 ppm at 5.8 with res temp of 20c and room temp 79 . Night times 70 . Does this mean I need to be upping the dosage ? Water level has dropped inch and a half of keep it at 600 ? Also do I add up a gallon at 600 and just add that to my res ? Never done a top off

ya, just top it with water and keep your ec/ppm the same and than change the rez water totally every week or so. if not, you'll start seeing deficiencies on leaves. Your ph wont stay stable and other problems will occure. This is one of the reasons i said to read my journal and that those bucks are headache.

Im surprised you don't have half of the problems i had with 5 gallons

 

[PK1]

 

[Thebestoftheworst]

@PK1 I started to read and now that I’m off call I can go threw it completely threw it I noticed in 4 days I had perfect ph and went from 600 ppm to 450 ppm and oh went to 5.0 this was at day 5 and now today did res change at 720 ppm at 5.7 ph

Silica 15ml and waited hour befor adding
Cal mag 10ml
Micro 7.5 ml
Grow 7.5 ml
Bloom 7.5 ml
Rapid Start 20 ml
Diamond Nector 15 ml
Hydro guard 6 ml
And waited hour befor ph to 5.7 I was going for 5.8 but I didn’t wanna overshoot

 

[Thebestoftheworst]

Rearranged room

 

[PK1]

lol, i posted that song in the wrong thread! my bad, you can ask ops to remove it if you like

 

[PK1]

no fans? air circulation?

 

[Thebestoftheworst]

@PK1
The orange bucket is what I kid my new nutes in befor doing res change so I can take my time is was just in picture today the small box under the cloner is a dehumidifier for backup but is not plugged in. Humidity is 61 and temp is 79 . Res temp is 20*c and I have a inline fan blowing directly on plant as well as a ducted mini split with two 6 inch registers blowing air from above . I will add some ovulating fans tho but plant is always in direct wind

 

[Thebestoftheworst]

Pk1 the bottle is Foliar spray just 25 ml of diamond nector in a 500 ml bottle

 

[GanjaFarmer24]

@PK1
The orange bucket is what I kid my new nutes in befor doing res change so I can take my time is was just in picture today the small box under the cloner is a dehumidifier for backup but is not plugged in. Humidity is 61 and temp is 79 . Res temp is 20*c and I have a inline fan blowing directly on plant as well as a ducted mini split with two 6 inch registers blowing air from above . I will add some ovulating fans tho but plant is always in direct wind

Ovulating fans, lol. JK
Your space looks clean and organized.