Log In Register

Steamrollers little hide away pt 1

I know that pump! It lives in my house before my RO system. Easy enough if I go that route. I use BRS for my RO and stuff like that; https://www.bulkreefsupply.com/1-4-aquatec-8800-booster-pump-kit-bundle.html ^^ That kit comes with shut off for RO...
Home Forums Medical Cannabis Cultivation Grow Diaries Steamrollers little hide away pt 1
Grow diary eligible · Medical Cannabis Cultivation

Steamrollers little hide away pt 1

by steamroller · Started
1d
Running
0
Updates
451
Replies
0
Images
Discussion below · 451 replies
Page 21 of 23 · Replies 401–420 of 452
I know that pump! It lives in my house before my RO system.
Easy enough if I go that route. I use BRS for my RO and stuff like that; https://www.bulkreefsupply.com/1-4-aquatec-8800-booster-pump-kit-bundle.html
^^ That kit comes with shut off for RO system. Always good to have replacement on hand! 👍

Bubbles can do the same thing right?
My air pumps blow what you guys use away!
I have 2 of them or the next size up.
As mentioned I plan on air in the res. of each bucket. I think I can push a lot of air for 15 buckets one way or another.
I would also recommend the alita air pumps. I have 3 of the 40 liter model. One is 10 yo the other 2 are 4 yo without a problem.
 
The different size I guess is just a test run, lack of commitment, and the explorer in me.
I have seen a few set ups with the 11l and they look like they grew well?
That and although I no clue what plant will do what I expect a couple to be mini trees.
It would be cool to run 2 sumps/res. and have them set differently.
Possibly instead of adjusting the res when I screw up I can just move a net pot to the other system?
IMO the buckets [ all 15 of them] were cheaper by quite a bit than any beginner 4 pot set up.
I can change the set up any time still and suspect to be able when running.
You are up early on a Sunday. I think we keep similar hours.

SLG has 8 gallon pots. Mine are 13.

1 pound in a 3x3 with 8 gal is for sure possible slg just did it.

By the time you get down to 3 gals more like 2 useable you will have a limit on plant size just like you do in dirt. The more roots you have the more water they displace and in a tight pot the fluid dynamics change and flow can be cut off to areas of roots causing an anaerobic zone.

Just stuff to watch for. Your decision on time to flip will be important to size the plant / roots to what you have to work with.
 
You are up early on a Sunday. I think we keep similar hours.
Bad habit like most of mine! I wake around 4am most days without alarm. Sometimes I have to travel 2 hours one way for work.
It comes from going to work 5+ days a week for well over 40 years.
I am at my best when I wake up. High the rest of the day! 🤷‍♂️
Been working 4 miles from home for last 2 months on a historic restoration project in the Saratoga State Park, so I have extra time on weekdays IN a.m.
 
Bad habit like most of mine! I wake around 4am most days without alarm. Sometimes I have to travel 2 hours one way for work.
It comes from going to work 5+ days a week for well over 40 years.
I am at my best when I wake up. High the rest of the day! 🤷‍♂️
Been working 4 miles from home for last 2 months on a historic restoration project in the Saratoga State Park, so I have extra time on weekdays IN a.m.
What do you do for a living if you don’t mind.

I have not had an alarm in over a decade.

This is what Sunday morning looks like here with my girls.

Image


Hard to see but there are 2 frenchies tucked in there snoring hard.
 
1 pound in a 3x3 with 8 gal is for sure possible slg just did it.
I followed with great interest in SLGs thread.
He grew a beast for a 3x3. 💪
My room is 20X6 ! With room outside for equipment.
Even with my handicap in this type of grow I can't lose IMO? 🤔

What do you do for a living if you don’t mind.
I am a copper roof specialist.
Been doing metal roofin for over 20 years.
Lots of Historical restorations and even a National [ possibly International] first prize for my work!
I have worked on things like the first presidential library created [FDR Hyde park] and churches like I was the Lords only servant!
DSC 0700

I am pretty handy and LOVE what Ido.. 🤷‍♂️ 🤣
 
Last edited:
I followed with great interest in SLGs thread.
He grew a beast for a 3x3. 💪
My room is 20X6 ! With room outside for equipment.
Even with my handicap in this type of grow I can't lose IMO? 🤔


I am a copper roof specialist.
Been doing metal roofin for over 20 years.
Lots of Historical restorations and even a National first prize for my work!
I have worked on things like the first presidential library created [FDR Hyde park] and churches like I was the Lords only servant!
View attachment 1335075
I am pretty handy and LOVE what Ido.. 🤷‍♂️ 🤣
Wow I can’t imagine what your material costs have done in the last 20 years. Copper is priced like unobtanium these days.

I do love that look tho. Cool niche.
 
I followed with great interest in SLGs thread.
He grew a beast for a 3x3. 💪
My room is 20X6 ! With room outside for equipment.
Even with my handicap in this type of grow I can't lose IMO? 🤔


I am a copper roof specialist.
Been doing metal roofin for over 20 years.
Lots of Historical restorations and even a National [ possibly International] first prize for my work!
I have worked on things like the first presidential library created [FDR Hyde park] and churches like I was the Lords only servant!
View attachment 1335075
I am pretty handy and LOVE what Ido.. 🤷‍♂️ 🤣
Impressive, ive done some copper in my past life only because I owned a brake.
 
Wow I can’t imagine what your material costs have done in the last 20 years. Copper is priced like unobtanium these days.

I do love that look tho. Cool niche.
The race track roof was the largest copper project on the East coast in 2019!
I consider myself privileged to do the work I do. It is not for everyone though.
I have been 37 stories up on the wrong side of the wall before!
OIP.23yPBKvtcbVC4B3uf0vp8AHaJ0

Lined the windows pockets with lead coated copper[ LCC ] on this building about 15 years ago.
Using one of those crazy swing scaffold set ups!
R.7d469df5b76c8803820cd55d4e9186ae
 
man sooo many of you guys are really skilled at things, kinda wish i was..
my house is starting to fall apart, the car is falling apart..
just yesterday i’m at starbucks drive thru, i have my heater control taped on high to work, when i pulled up to the drive thru window, smoke was starting to come out of the vents.. no fire though, hahaha..
lastly, i’m falling apart!..
anyhoo, very nice work, must pay good!!..
i’m at a point where i don’t want to do anything..
 
You got skillz Nick!
I can fix household stuff, pretty good carpenter also. No clue or desire when it comes to my vehicles. 🤣
And I would sure love to do nothing, but I will work till death probably.
Thank God for our favorite plant! 👍
 
man sooo many of you guys are really skilled at things, kinda wish i was..
my house is starting to fall apart, the car is falling apart..
just yesterday i’m at starbucks drive thru, i have my heater control taped on high to work, when i pulled up to the drive thru window, smoke was starting to come out of the vents.. no fire though, hahaha..
lastly, i’m falling apart!..
anyhoo, very nice work, must pay good!!..
i’m at a point where i don’t want to do anything..
You notice it’s all the old fuckers up this early on a Sunday. Those kids can’t hang with us. Welcome to the 2 hours before the crack of dawn old guy coffee party.
 
You notice it’s all the old fuckers up this early on a Sunday. Those kids can’t hang with us. Welcome to the 2 hours before the crack of dawn old guy coffee party.
It helps when they take you out of your wheelchair at 7:30pm for bed! 😲 🤣 😉
Just kidding but feel it for real!
I may be old, but I whip the young ones 5 days a week!
Not for fun, but I do enjoy it! 👍
 
anyhoo, very nice work, must pay good!!..
.
Thanks Nick!
I work for a company that is all union roofers.
Except for about 9 guys who are metal/carpentry specialist. 😉
We get union pay when on 'prevailing wage rate jobs', but don't contribute to the union.
It is the law here.
The union would want half of my hourly pay when I do metal and close to half on carpentry.
That's about $35 an hour! 😲 I don't mind making my boss money, that is why he hired me, but have ZERO interest in lining a fat union presidents pockets. 🤷‍♂️
Our company has close to 75 union guys. The union gets enough already from my company already IMO...
75x$25x40hours =$75000 a week!
They don't need my money like I do...
 
man sooo many of you guys are really skilled at things, kinda wish i was..
my house is starting to fall apart, the car is falling apart..
just yesterday i’m at starbucks drive thru, i have my heater control taped on high to work, when i pulled up to the drive thru window, smoke was starting to come out of the vents.. no fire though, hahaha..
lastly, i’m falling apart!..
anyhoo, very nice work, must pay good!!..
i’m at a point where i don’t want to do anything..
Sounds like heater core brother
 
Page 21 of 23 · Replies 401–420 of 452
Back
Top Bottom