Log In Register

desperately In need of advice!

  • Thread starter Thread starter ayeob
  • Start date Start date
  • Tagged users Tagged users None

desperately In need of advice!

ayeob 1,644 Replies 149,476 Views
Page 32 of 83 · Replies 621–640 of 1,645
So the smaller tent doesnt have a filter, it just vents in the room cause its only my veg tent so it doesnt smell super strong.
gotcha, is it better to have them in different tents during different stages of their life?

how old are your plants
 
gotcha, is it better to have them in different tents during different stages of their life?

how old are your plants
I dont think it matters i just usually have like 10-12 plants going at a time. 6-8 in veg and 4 in flower. I use the 3x3 to veg, and 4x4 to flower as it has more room obviously, plus its 8 inches taller.

And i honestly dont keep track of time very well.
 
I dont think it matters i just usually have like 10-12 plants going at a time. 6-8 in veg and 4 in flower. I use the 3x3 to veg, and 4x4 to flower as it has more room obviously, plus its 8 inches taller.

And i honestly dont keep track of time very well.
yeah that makes sense, but honestly you’ve probably been doing it long enough you can kind of “eyeball” stuff like second nature that you don’t need time anymore lol
 
yeah that makes sense, but honestly you’ve probably been doing it long enough you can kind of “eyeball” stuff like second nature that you don’t need time anymore lol
Started growing February of '18, i still have issues from time to time. All i know is the autoflower thats in there is like 6 weeks from sprout, Maybe? Everything else was started like new years but my environment has been out of whack, i changed up my soi l recipe, its been wicked cold too so things just been moving slowly.
 
yeah i was looking into those i want a nice controller to allow me to monitor everything in one place. do you have a pic of your set up?

Tent interior A


My suggestion would be to buy the entire ACI tent kit with the fan and controller you want since it includes their controller mount plate and comes with cloth pots, snips, screen, etc. That's the route I'm going the next time I need to buy a tent. I want to upgrade to the controller 69 since I plan on picking up their Cloudforge T3 to automate the humidity side of things when they're back in stock.
 
Last edited:
morning everyone, just and update she’s looking extremely well right now. the pot is getting lighter so either today or tomorrow will definitely need watering/feeding. but just by seeing it today she looks to be thriving!! and bud are getting bigger
 

Attachments

  • image.jpg
    image.jpg
    282.2 KB · Views: 25
  • 1A0AA94D-5210-4CA6-98B6-A0CA93680DFD.jpeg
    1A0AA94D-5210-4CA6-98B6-A0CA93680DFD.jpeg
    268 KB · Views: 23
  • 4BA8C5C3-3AD8-4B9F-8B26-2B0B72406B81.jpeg
    4BA8C5C3-3AD8-4B9F-8B26-2B0B72406B81.jpeg
    323.6 KB · Views: 24
  • 65F0364B-E89F-4631-B156-914D37B87868.jpeg
    65F0364B-E89F-4631-B156-914D37B87868.jpeg
    241.3 KB · Views: 24
  • 5EE13785-29B2-4C91-ACFE-C7DA637E0545.jpeg
    5EE13785-29B2-4C91-ACFE-C7DA637E0545.jpeg
    388.9 KB · Views: 22
morning everyone, just and update she’s looking extremely well right now. the pot is getting lighter so either today or tomorrow will definitely need watering/feeding. but just by seeing it today she looks to be thriving!! and bud are getting bigger
Looking great!
 
True all autoflowers are different, Northern light is a beginner friendly plant that lets mistakes slide that would kill other autos, but they all have the same commonality, they hate stress, less nutes is advisable, no transplantation, keep things simple and you will be fine.
 
My suggestion would be to buy the entire ACI tent kit with the fan and controller you want since it includes their controller mount plate and comes with cloth pots, snips, screen, etc. That's the route I'm going the next time I need to buy a tent. I want to upgrade to the controller 69 since I plan on picking up their Cloudforge T3 to automate the humidity side of things when they're back in stock.
That's close to what I have. I didn't buy the kit, though. I have the 642 (2x4x6) tent and the Controller 69 Pro with the S6 inline fan. I also have their S6 oscillating fan, but it's not connected to the controller. I'm also using their fabric pots.

The metal mounting plate for the controller is nice. The controller is magnetic, so no screws are required. That's good, too, because the screws provided with the controller don't work with the mounting plate. I don't know why they're included. Mounting the controller on the mounting plate is very convenient, because it's easy to see the status of the tent at a glance. I especially like how it shows the VPD. It even has the time of day. I have not used the controller's panel to program it, however. The phone app is much easier to use. It's also nice to check the status or change settings from any place my phone can connect to the Internet.

I don't recommend waiting to order the T3 till it's in stock. Pre-order it and get on the waiting list if you can. I ordered a T3 humidifier in November and there still are several orders ahead of mine. The last update was in December when they promised delivery in January. My order didn't arrive for my current grow and it doesn't look like it will arrive in time for my next grow. I'm looking forward to using it, though, because it promises to have some very nice features. I like how it doesn't need to be inside the tent. That should make refilling it much easier. More space inside the tent is always helpful, as well.

I recommend buying one or two of their control plugs to go with the controller. It allows operating equipment not sold by AC Infinity. I have two that I'll be using after I reconfigure between grows. One will be for the heater and one for the humidifier until the AC Infinity T3 I ordered is delivered.

Here's a pic. It's watering day, so the RH and VPD are off a bit.

1675962850423
 
I just use magnets to hold my controller. Same with my hygrometer that monitors my 3 zones.

ACI is nice, they didn’t have a 3 in 1 tent at the time.

I do own 3 of the fans and plan to get the oscillating one when it’s in stores here.

Can’t upload pics again.

I attach things above the door zippers. At a corner or tight to the frame. No issues yet.
 
Looking good ayeob. I'll keep reading/catching up but now that some days have passed, what changes did you make (or not make) since your first post? And have you done any pruning of bottom/older, or maybe damaged leaves?
 
afternoon everyone!

sorry i don’t post yesterday, but here’s a pics and a vidoe for today. i watered yesterday adding flower fuel and dropping tiger bloom.

it looks like i got some nice colas forming! definitely nervous when it comes to harvesting and drying because that’s where my last stuff got messed up.

Looking good ayeob. I'll keep reading/catching up but now that some days have passed, what changes did you make (or not make) since your first post? And have you done any pruning of bottom/older, or maybe damaged leaves?
only changes i made was i got rid of the tiger bloom and put some flower fuel in the mixture. i’m unsure if i can take out some leaves. i don’t want to stress her out anymore. i also got a new aci hygrometer the B2 i wanted the one with the probe but i think amazon had them flip flopped. also made a better stand for the pot because the other one was lopsided
I just use magnets to hold my controller. Same with my hygrometer that monitors my 3 zones.

ACI is nice, they didn’t have a 3 in 1 tent at the time.

I do own 3 of the fans and plan to get the oscillating one when it’s in stores here.

Can’t upload pics again.

I attach things above the door zippers. At a corner or tight to the frame. No issues yet.
i want to get the aci oscillating fan as well it looks so nice. definitely want to get a controller and try and run all aci equipment. so much more convenient having everything in one place.
That's close to what I have. I didn't buy the kit, though. I have the 642 (2x4x6) tent and the Controller 69 Pro with the S6 inline fan. I also have their S6 oscillating fan, but it's not connected to the controller. I'm also using their fabric pots.

The metal mounting plate for the controller is nice. The controller is magnetic, so no screws are required. That's good, too, because the screws provided with the controller don't work with the mounting plate. I don't know why they're included. Mounting the controller on the mounting plate is very convenient, because it's easy to see the status of the tent at a glance. I especially like how it shows the VPD. It even has the time of day. I have not used the controller's panel to program it, however. The phone app is much easier to use. It's also nice to check the status or change settings from any place my phone can connect to the Internet.

I don't recommend waiting to order the T3 till it's in stock. Pre-order it and get on the waiting list if you can. I ordered a T3 humidifier in November and there still are several orders ahead of mine. The last update was in December when they promised delivery in January. My order didn't arrive for my current grow and it doesn't look like it will arrive in time for my next grow. I'm looking forward to using it, though, because it promises to have some very nice features. I like how it doesn't need to be inside the tent. That should make refilling it much easier. More space inside the tent is always helpful, as well.

I recommend buying one or two of their control plugs to go with the controller. It allows operating equipment not sold by AC Infinity. I have two that I'll be using after I reconfigure between grows. One will be for the heater and one for the humidifier until the AC Infinity T3 I ordered is delivered.

Here's a pic. It's watering day, so the RH and VPD are off a bit.

View attachment 1329119
definitely want to upgrade everything, maybe once my tax return hits, i’ll be able to get a few new pieces.
 

Attachments

  • IMG_1186.MOV
    22.2 MB
  • 04919FB6-51C6-4E55-ABB3-CD66D5491C14.jpeg
    04919FB6-51C6-4E55-ABB3-CD66D5491C14.jpeg
    296.4 KB · Views: 20
  • 61785E22-677B-4822-AD4E-8668823F0E54.jpeg
    61785E22-677B-4822-AD4E-8668823F0E54.jpeg
    251.9 KB · Views: 22
  • 6FD8F063-7C62-4F88-8B7F-86E7F2544FAB.jpeg
    6FD8F063-7C62-4F88-8B7F-86E7F2544FAB.jpeg
    209.2 KB · Views: 23
  • B7F71367-3BB3-4BAB-9DFA-0DBB9F9A2EB6.jpeg
    B7F71367-3BB3-4BAB-9DFA-0DBB9F9A2EB6.jpeg
    238.9 KB · Views: 21
  • D1364155-9DF9-4129-9B46-83B5ABA84849.jpeg
    D1364155-9DF9-4129-9B46-83B5ABA84849.jpeg
    211.1 KB · Views: 22
  • F8D13B37-7998-481B-A385-A161C7287D22.jpeg
    F8D13B37-7998-481B-A385-A161C7287D22.jpeg
    339.3 KB · Views: 20
definitely want to upgrade everything, maybe once my tax return hits, i’ll be able to get a few new pieces.
Sounds good! My growing adventure grew as I figured out what I needed. It's a lot more than what I thought I would need when I began. That much is certain. It has been fun, though. 😉
 
Sounds good! My growing adventure grew as I figured out what I needed. It's a lot more than what I thought I would need when I began. That much is certain. It has been fun, though. 😉
what did you end up needing?
 
Page 32 of 83 · Replies 621–640 of 1,645
Back
Top Bottom