THCFarmer.com
121,280 Members Log In Register
Log In Register

Ideal temps and RH for clones

  • Thread starter Thread starter Akabudz
  • Start date Start date
  • Tagged users Tagged users None

Ideal temps and RH for clones

Akabudz 228 Replies 48,366 Views
Page 3 of 12 · Replies 41–60 of 229
#41
Hey bro, thanks for your advice 👍
Personally I would rather go with single pots, however I would find it difficult in such a small space to set up automated.
Any advice appreciated on doing automated feed in such a small space with 12 pots would be appreciated
Thanks
 
#42
Akabudz said:
Hey bro, thanks for your advice 👍
Personally I would rather go with single pots, however I would find it difficult in such a small space to set up automated.
Any advice appreciated on doing automated feed in such a small space with 12 pots would be appreciated
Thanks
Click to expand...
Will be doing the same thing shortly here also. About 24 1 gal pots. Had some good help here.

www.thcfarmer.com

Planning out coco advice.

Ok planning out my transition to coco. I have a 4'x6'x6" drip tray on order. Plan to just shop vac that out daily and looking to setup an autofeed system. Looking for recommendations on equipment. I have a 210gph inline pump that is mag driven by impeller so I'm not worried if it's to big as it...
www.thcfarmer.com www.thcfarmer.com
 
#43
Akabudz said:
Hey bro, thanks for your advice 👍
Personally I would rather go with single pots, however I would find it difficult in such a small space to set up automated.
Any advice appreciated on doing automated feed in such a small space with 12 pots would be appreciated
Thanks
Click to expand...

These Hydro halos from bloom bros are amazing! A little $$$ but check them out. I just set up 2 modest tents with them and im never going back to 1/4 spaghetti again. Just make sure your runs are the same length and get a valve on each run. Cheers and good luck!! 🌱 🍻
20200902 114254
20200823 221808
20200904 212128
20200904 212116
 
Last edited:
#45
Hey @Aqua Man bro will read up in that 👍 thank you, not long finished 14 hr shift abd eyes are not good at this time lol. Thanks again for all your help, you are a foaming within this community brother 👍👌
 
#46
@Aqua Man.. Already following your thread regards going coco bro.
Just to add this is a 2 ft x 2ft x 5ft tent in my bedroom lol, so pretty restricted to space 👍👌
 
#47
yeah, got several of those halo ring feeders myself - thought of setting up auto-watering indoor system, yet to get around to it.

got several florist pots (16L) and its outer container (24L) - also with ideas about indoor watering system, also yet to be setup. maybe coco grow, instead of soil mix grow.

there are so many options, its a matter of finding which you think is suitable, then giving it a try, adapt as you go.

there are many different methods/designs of these indoor automated watering system which can be a bit of a maze, but my stumbling issue is the placement of the reservoir.
 
Last edited:
#48
2, 6 port rainbird manifolds would work too for irrigation. I'm with Aqua Man, I'd also recommend single pots. I've done a single bed grow under light before and it wasnt cool. Besides the reasons Aqua mentioned the plants in the middle just overgrew everything on the outside. With individual pots you can move them around as they grow to best situate each plant within the canopy.
 
#49
Dirtbag said:
2, 6 port rainbird manifolds would work too for irrigation. I'm with Aqua Man, I'd also recommend single pots. I've done a single bed grow under light before and it wasnt cool. Besides the reasons Aqua mentioned the plants in the middle just overgrew everything on the outside. With individual pots you can move them around as they grow to best situate each plant within the canopy.
Click to expand...
Got all my shit comin today bro. Even condensate pump. Rest is minor local stuff... getting so pumped to plunge back to the hydro side.
 
#51
Dirtbag said:
Dude I cant wait to see you rock the coco. What have you got planned for ladies to run in there?
Click to expand...
Still debating... i really wanna run the cake n chem cause its supposed to be a big yielder that im thinking I could pull a 3lb off my light grow but that means another seed run. And I would likely do 3 strains in that case including blueberry dragon cheese and one undecided from @dire wolf . I think in gonna go 1 more mother run then cake n chem full bore from clone in sog and go for a 3lb grow just to see
 
#52
Aqua Man said:
Still debating... i really wanna run the cake n chem cause its supposed to be a big yielder that im thinking I could pull a 3lb off my light grow but that means another seed run. And I would likely do 3 strains in that case including blueberry dragon cheese and one undecided from @dire wolf . I think in gonna go 1 more mother run then cake n chem full bore from clone in sog and go for a 3lb grow just to see
Click to expand...

Nice. That sounds like a solid plan. I'm right there with ya in mother hunt mode for now, yield be damned.
 
#54
Quick update..
All potted clones (14) are growing well just after a few days, leaves have trippled in size 👍 I will today transplant from cups to their final home.
After taking in all avice given and considering my tiny grow space of 2ft x 2ft I feel I have to go with 4 x 3 gal pots. With 4 clones in each, I can rotate these to give equal light spread.
Mother plant bounced back real nice after I took 90% of her for clones, however I will have to compost her as I have no room for her in the tent. This is sad as she is thriving.
I also have 2 x plants from seed that I will put with clones ( these were for back up) , giving me 16 plants for sog grow.
I'm thinking 7 to 10 days in veg then flip 12/12.
I.will update with pictures later today as I need to empty tent, flush coco and repot all.
Thanks again for all advice given in my journey with clones and a sog grow so far.. I think the shit is about to happen 🍻👍
 
#55
A small update, 11 to 12 days ago i cut mother up and made clones, mother was in a bad way with just 2 x tiny side branches left.
Cloned within minutes or hrs of cutting.
 

Attachments

  • IMG_20200827_152153.jpg
    IMG_20200827_152153.jpg
    528.1 KB · Views: 101
#56
11 to 12 days after cutting they are growing well 👍
 

Attachments

  • IMG_20200908_182749.jpg
    IMG_20200908_182749.jpg
    347 KB · Views: 88
  • IMG_20200908_182739.jpg
    IMG_20200908_182739.jpg
    361.6 KB · Views: 87
  • IMG_20200908_182734.jpg
    IMG_20200908_182734.jpg
    401.2 KB · Views: 86
  • IMG_20200908_182709.jpg
    IMG_20200908_182709.jpg
    373 KB · Views: 89
#58
Now the odd pot lol. Couldn't kill mother, so I will leave her be and a few days before switching 12/ 12 will trim her back, 3 x side branches taking off, need to pull them way down in size or they will fill the tent.
 

Attachments

  • IMG_20200908_182727.jpg
    IMG_20200908_182727.jpg
    383.4 KB · Views: 98
Page 3 of 12 · Replies 41–60 of 229
Back
Top Bottom