lbezy
- 61
- 18
It's a perpetual harvest I have cloones I have teens and everything goes in the same size but it continues every 63 days except I have the week that I have to trim and reload
Nothing goes under HPS it's all t fives until I go in the flowerthats kinda my point, and I bet its more then a week.
I'm. Confused alsoSo a minute, based on electric consumption wouldn’t it take 2.2
1000W (2255 Watts) LEDs to equal 1 1000W HPS ???
(All my LEDs pull 44.3% of advertised light rating).
Or when you guys say 1000W Led are you inferring 1000Watt wall pull ?
1000w draw at the wall. Generally a 650w LED is considered the equivalent of a 1K HID. True 1Kw LED's are much brighter than a 1K HID. Not 1Kw equivalent, actual 1000w draw LEDs.Or when you guys say 1000W Led are you inferring 1000Watt wall pull ?
Advertised equivalent wattage and true wattage are not the same and miles apart. If your LED says 1000w it's likely a cheapoSo a minute, based on electric consumption wouldn’t it take 2.2
1000W (2255 Watts) LEDs to equal 1 1000W HPS ???
(All my LEDs pull 44.3% of advertised light rating).
Or when you guys say 1000W Led are you inferring 1000Watt wall pull ?
3x3 vs 5x5 for ledAdvertised equivalent wattage and true wattage are not the same and miles apart. If your LED says 1000w it's likely a cheapo
Absolutely. Running light intensity at the canopy above 1100 ppfd requires Co2 to get any benefit from the extra light. It'll actually do more harm than good. For a naturally ventilated grow room 900-1000 ppfd is ideal, a 1kw LED is capable of 1500 ppfd+, it's way overkill and you'll never see the benefit of all its extra photon power without Co2 levels in the 1200-1400 range.Ive noticed the big 1000watters mention to use with co2 .
New digital ballast is cheap. Save you 12 to 20 percent in cost on juice.I still run my Old SunSystem 1000watt analog switchable ballast with air cooled hood I got in 1998. I do want to upgrade as the electric bill from it is out of control. To the point I haven't run my indoor setup in 2 years. My other half she started using my veg and flower rooms for crafts and storage. I have just been doing outdoors. Which has been fun anyway. But I would love to get it all back up and running. I miss the smell of fresh cannabis and coffee in the morning. I also miss growing enough cannabis that I don't mind experimenting with things like bubble hash and rosin. I got a great yield this year outside. But since there's only one harvest a year. I have to make it last. So no Bubble. I do sift my trim and press it.
Not sure what ya mean? This true wattage but an absolute waste if you ask me. Can explain more later if ya want. But yeah that's not a cheapo. Most are3x3 vs 5x5 for led
Agreed; it's important. But it's also very highly space dependent. I'm in a much more confined area than most growers, so I try to fudge things as much as I can. But 2 lb. per DE should be pretty standard I would imagine.Are you getting close to 2 lbs a light . That's the standard these days but I had 20 raptors in my basement with hotilux single end bulbs and got 2 lbs per light of fire, headband and ECSD so if you have 2 lights , yeild is very important , you agree ?
I'll figure it out , I did last harvest using my 16 bulb 5-5 fixtures at this point I'm NOT giving up on my DE I'm buying new hotilux bulbs and gonna kick ass as I try to always do , with success comes $ so being successful is the the key . I'm done on this subject , got bigger fish to fry . I getting ready to have to deal with state compliance , zoning , banned substances, I have no time to argue apples and oranges . I honestly came on here to help someone who really needs it to remind myself why I love what I do , and still have love for the plant . Thanks for your input .Agreed; it's important. But it's also very highly space dependent. I'm in a much more confined area than most growers, so I try to fudge things as much as I can. But 2 lb. per DE should be pretty standard I would imagine.
I think perhaps your getting better efficiency by hanging your lights like you do, your DE setup is sweet. Mine were in hood, so half was reflected back, and some efficiency lost. If I was you; and your living up north; I would consider a hybrid approach going forward. Keep your HPS and maybe replace a few to cut down you cost; while maintaining what you need for heat generation. Could be done in phases also, so it's not killing you on price.
But I would look into a setup whereas you can maintence your LEDs. With a setup like yours, maintence and long term cost should be part of your strategy. Also; I would be looking hard at those LM301H diodes, cause of how they signal plant growth; noding. It would be the best approach IMO. Focus on Low temps, (3000->3500K).
Youll see better results from Philips AGRO+ Plus Double-Ended High Pressure Sodium EL DE Lamp (Previously GreenPower)I'll figure it out , I did last harvest using my 16 bulb 5-5 fixtures at this point I'm NOT giving up on my DE I'm buying new hotilux bulbs and gonna kick ass as I try to always do , with success comes $ so being successful is the the key . I'm done on this subject , got bigger fish to fry . I getting ready to have to deal with state compliance , zoning , banned substances, I have no time to argue apples and oranges . I honestly came on here to help someone who really needs it to remind myself why I love what I do , and still have love for the plant . Thanks for your input .
LB
I agreeYoull see better results from Philips AGRO+ Plus Double-Ended High Pressure Sodium EL DE Lamp (Previously GreenPower)
Why would it be a waste? For example, compared to the best de hps at full power its 60% more power and 30-40% less heat with a much better coverage area.Not sure what ya mean? This true wattage but an absolute waste if you ask me. Can explain more later if ya want. But yeah that's not a cheapo. Most are
Because you now looking at it like a mathematician.Why would it be a waste? For example, compared to the best de hps at full power its 60% more power and 30-40% less heat with a much better coverage area.
The hlg 650r diablo only has low 90 ppfd at the outer corners in a 5x5 at 24". With the photontek at 75% power you get 1000ppfd in the center with the corners all over 600.