Mikedin
Staff
Supporter
- 4,590
- 263
That’s a deal for the metal shelving! I paid $89 for this one but it has coated wood shelves, but was worth it, always felt wasteful running one of the big lights for some seedlings and clones, that’s why I switched and started working in this cabinet and i just keep tinkering with it, eventually I’ll relace the walls with probably some foil lined styrofoam to get a bit of reflectivity going in in thereA well spent $79 on this shelving. Indispensable
Nice! I'm in the process of building a seedling shelf now. The styrofoam will be a nice touch for some added insulation.That’s a deal for the metal shelving! I paid $89 for this one but it has coated wood shelves, but was worth it, always felt wasteful running one of the big lights for some seedlings and clones, that’s why I switched and started working in this cabinet and i just keep tinkering with it, eventually I’ll relace the walls with probably some foil lined styrofoam to get a bit of reflectivity going in in there
I used 360deg nozzles from Amazon like $8 for a 50 pack just gotta make sure you find a way to seal the lid I just used some stick on door insulation the strips from the local hardware store and put it around the top lip then just snap the lid in tightNice! I'm in the process of building a seedling shelf now. The styrofoam will be a nice touch for some added insulation.
Also, looking into building a cloner similar to yours.. haha but quite a bit smaller... did you use 90, 180, or 360 degree mister nozzles?
I have a bit of 1/2" pvc tube that i can use. All i need is the T fitting, the nozzles, and airstone/pump.
Perfect! I was thinking my lack of a seal would help dissipate that positive pressure from the airstone. Good call. I'll just put a little vent with a flap on itI used 360deg nozzles from Amazon like $8 for a 50 pack just gotta make sure you find a way to seal the lid I just used some stick on door insulation the strips from the local hardware store and put it around the top lip then just snap the lid in tight
Little update for day after being stuck into soil, not a droop in sight they are lovin life and their new light!
Yep dosent take much, and in veg and with clones you want that RH sky high anyways so the heat that passively leaves the cabinet it takes the excess RH with it, even just sitting stagnant that done over the cloner only reads 63%% RH inside the dome itself and it’s only at 74f this @SpiderFarmerLED puts off just about no heatPerfect! I was thinking my lack of a seal would help dissipate that positive pressure from the airstone. Good call. I'll just put a little vent with a flap on it
That dome is amazing. Did you build it? I've been looking for a nice one, but it's looking like i might need to diy.Yep dosent take much, and in veg and with clones you want that RH sky high anyways so the heat that passively leaves the cabinet it takes the excess RH with it, even just sitting stagnant that done over the cloner only reads 63%% RH inside the dome itself and it’s only at 74f this @SpiderFarmerLED puts off just about no heat
It was a old 4’ long mini greenhouse actually haha, I took it all apart resized it to what I needed and put it back together the duct tape job at the bottom is temporary but I think i may replace the whole dome but we’ll seeThat dome is amazing. Did you build it? I've been looking for a nice one, but it's looking like i might need to diy.
Appreciate it fam, increased the Grow big by 5ml at day 5 on the originals plus another 8 ml of the Hypocleanse , nothing added to the res sinceThat setup is superb!
Trust me.....I've been watching......
Nice setupAppreciate it fam, increased the Grow big by 5ml at day 5 on the originals plus another 8 ml of the Hypocleanse , nothing added to the res since
Safe to assume you have that rig humming now hombre. That’s dope!How’s everyone today, did some up potting of the clones here’s how it went
They are loving this SF600the 4x other clones were potted up 6 days ago I believe
Video diddnt upload the first time
Well… she’s hummin away in the bathroom with some bleach nowSafe to assume you have that rig humming now hombre. That’s dope!
Spectacular! Do you do a 10/1 water / bleach?Well… she’s hummin away in the bathroom with some bleach now, put away till cloning time again, now it’s the lights time to… shine…
These last 2 clones almost look like they where starting to flower a shade / kinda but might just be the way the growth is coming in really fine at the tips, but that’s ok we’ll see how they veg out
Nah, at this point I just do about 3 caps full in about 3 gallons of water and let it run for 24 hours,Spectacular! Do you do a 10/1 water / bleach?
I was thinking about testing out some no rinse sanitizer i use for my beer equipment. Just because it's food safe and no rinse.. and i have a bottle... you ever use the stuff?
Nice! Smart way to do it! I've been studying your clone process. Once my cloner is complete i'm going to give it a try.Nah, at this point I just do about 3 caps full in about 3 gallons of water and let it run for 24 hours,
When I run the clones I use 500ppm Hypocleanse, I know it’s basically diluted bleach but it works great never any buildup in the res when the clones are done but I just wash it quick then let bleach water circulate before I let it dry to store
Thanks brother, I love seeing them root up nice can’t wait the next week till they hit the next jumpLooking proper!!!!!!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?